User`s manual

Still Image Recording Service

121

When a Remote Web Server is Used to Send Automatically Generated

Pages

If a web server is set up separately from the WebView camera server, you can use the

sample pages (see P.80) by copying the required files from the WebView camera server to

the web server and then modifying some of the files. Because the FTP server is used for

uploading, the FTP server and web server must run on the same machine.

Selecting the Settings

Make a schedule reservation in the Still Image Recording Service settings (see P.107

onwards). For the files in the example described below, set the web server home

folder to WWWRoot, the IP address to 192.168.100.10, and the port number to 80.

The sample pages can be viewed at the following URLs:

● Automatically generated page

http://192.168.100.10/Upload/Image1/index.html

● Applet sample 1

http://192.168.100.10/Upload/SamplePages/AppletSample1/index.html

● Applet sample 2

http://192.168.100.10/Upload/SamplePages/AppletSample2/index.html

● Applet sample 3

http://192.168.100.10/Upload/SamplePages/AppletSample3/index.html

Copy the "Upload" folder in the "SamplePages" folder in the webview server home

folder (default: C:\Program Files\Canon\WebView\DownloadRoot) into the WWWRoot

folder.

Create a new image storage folder called "image1" in the copied "Upload" folder.

Modify the HTML file coding so that it will run the applet sample pages. Open the

applet.template.html and script.template.html files in the respective "AppletSample1/2/

3" folders in the copied "Upload" folder and replace the web server IP addresses and

port numbers in the following:

http://_HTTP_SERVER_HOST_AND_PORT_/-wvdoc-01-/SamplePages

http://_HTTP_SERVER_HOST_AND_PORT_/-wvdoc-01-/

to the following:

http://192.168.100.10/

Caution

Because the applet may not run if you use a host name as the IP address,

always specify the IP address.

Using the Still Image Recording Service to Send Information