User`s manual

Caution

When the WWW server function is Used to Send

Automatically Generated Pages

If the camera server's WWW server function is to be used to send automatically generated

pages over the web, you can use the sample pages (see P.80) installed at the same time as

the WebView camera server.

Specify the settings below to use the WWW server function.

Selecting the Settings

Make a schedule reservation in the Still Image service settings (see P.107 onwards).

Leave the directory for the upload place and the upload place folder for the schedule

set to the default settings.

- "Upload place" -> "Directory"

C:\Program Files\Canon\WebView\DownloadRoot\Upload

- "Schedule (reserved schedule name)" -> "Upload" -> "Upload place"

Image1

The sample pages can be viewed at the following URLs:

● Automatically generated page

http://

192.168.100.10*/-wvdoc-01-/Upload/image/index.html

● Applet sample 1

http://192.168.100.10*/-wvdoc-01-/SamplePages/AppletSample1/index.html

● Applet sample 2

http://192.168.100.10*/-wvdoc-01-/SamplePages/AppletSample2/index.html

● Applet sample 3

http://192.168.100.10*/-wvdoc-01-/SamplePages/AppletSample3/index.html

* The underscored portion is a sample IP address. Enter the actual camera server IP

address.

Also, if the camera server's HTTP conversion server port number is 80, only the

camera server host name is required. If not, you must include the camera server

host port number (eg. 192.168.100.10:8080).

If the WebView camera server is not installed in the above location

(C:\Program Files...), change the setting to match the folder in which the

server was installed.