User`s manual

4
4. Connecting to the Camera Server
Connection to the camera server can be established in two major methods as follows.
4-1. Connecting to the Camera Server by Entering Address Directly
Enter IP address or host name in the address box (ÆP. 5) directly and tap the Enter key.
The video port (ÆP. 10) can also be specified with “:” (a colon) separator; however, there
is no need to specify it.
To specify the video port:
4-2. Connecting to the Camera Server Already Registered
Open the address box (ÆP. 5) to display a drop-down list and select the camera site name.
For details about registering camera servers, refer to “5-3-1. Camera Site List” (ÆP. 9) .
Tip
Once connection to the camera server is established, the server is automatically registered in
the camera site list
(ÆP. 9) of the viewer.