User`s manual

17
7. Error Messages
Error messages are displayed only when the viewer is in Normal Mode (ÆP. 5 ) .
Message No response from the server.
Operation/Status
To connect to the server.
Condition
Connection to the video server has failed.
Message No response from the camera control server. You can use video
only.
Operation/Status
To connect to the server.
Condition Connection to the video server is established but not to the
camera control server.
Message Network is busy. Please try again later.
Operation/Status To connect to the server.
Condition The number of clients that can be connected simultaneously
from the viewer has reached the maximum specified at the
camera server.
Message The connection to the server is restricted.
Operation/Status To connect to the server.
Condition Access restrictions have been set at the server.
Message The camera is switched off or faulty.
Operation/Status
Connected.
Condition
The camera is switched off or broken.
Message Could not get camera control privileges.
Operation/Status
To tap the Start Control button.
Condition The number of the clients waiting for control privileges has
reached the maximum specified at the camera control server. Or
another client with camera control privileges higher than
yourself is connected to the server.
Message 100 camera sites already registered. This camera site will not be
auto-registered.
Operation/Status
To connect to the server by wvh file or entering the address directly.
Condition The server being connected is not registered and 100 camera
sites are already registered with the viewer.