VB-M700F Operation Guide

8-2

You can set the camera so that the following data is saved automatically to the camera's SD memory card. (“Chapter 5

Setting Page”, “[Memory Card] SD Memory Card Operations and Settings” (p. 5-30)).

• JPEG images when recording-mode stream transmission failed to be sent due to network errors

• JPEG images when HTTP or FTP upload failed

•Log

 Access to the SD Memory Card

The SD memory card cannot be accessed by a web browser. Use the SD Card Utility (p. 1-4) or FTP software (not included)

to access the camera using the camera's IP address.

FTP Software Settings

Address: Camera IP address (factory default setting: 192.168.100.1)

User ID: Administrator user ID (factory default setting: root)

Password: Administrator password (factory default setting: camera)

SD Memory Card Access