User's Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
3-13
How to Operate VB-C60 Viewer
VB-C60 Viewer
Obtaining the Camera Control Privilege
The camera cannot be controlled by multiple users at the same time. Only the user with the
control privileges can control the camera. To perform pan, tilt and zoom operations, implement
backlight compensation and preset or otherwise control the camera, you must obtain the control
privileges first.
How to Operate
Camera Control Privilege Status Indicator
How the camera control buttons and Camera Control Status Indicator are shown changes as
follows according to the status of control privileges.
"Obtain/release Camera Control" button
Obtains/releases Camera Control.
* With VB Viewer, you can only obtain the camera control privileges.
Control Privilege
Status Indicator
The status of
camera control
privileges is shown.
Click "Obtain/release Camera Control" button to obtain the control privileges.
Admin Viewer
VB Viewer
The Control Privilege Status
Indicator is shown in gray.
The Control Privilege Status
Indicator is shown in blue.
While you are waiting for control
privileges in VB Viewer, the
remaining standby time is shown in
the Control Privilege Status Indicator.
While video is paused ( P. 3-19), an
icon indicating the paused status is
shown in the Control Privilege Status
Indicator.
Control privileges not assigned Control privileges assigned
Waiting for control privileges Video paused