User's Manual

E16
3 OPERATION
E17
Change the setting on the information display.
For details on the information display, refer to the “Display
Operation Manual” at the end of this Operation Manual.
Information Display
Setting the Image Stabilizing
Direction and Characteristics
IS Horizontal
Direction Selector
Switch
IS Vertical
Direction Selector
Switch
To select one of the following modes, operate the IS
horizontal (or vertical) direction selector switch.
Standard characteristics
(STD.)
This mode minimizes unnatural movements
by implementing special processing for
the low-frequency shaking caused by slow
camera work and allows smooth operation
during regular camera operation.
Maximum characteristics
(HIGH)
This item is set to ensure that the shaking in
all the frequency bands is stabilized at the
maximum characteristics. If low-frequency
shaking is a concern with stationary shots,
the anti-vibration effect is enhanced by
selecting the maximum characteristics.
Stop (OFF) This stops the IS function.