User's Manual

E4
E5
1 HOW TO MOUNT
Macro Controller
Large Lock Knob
Small Lock Knob
Mounting Knob
Clamper
Pan
Handle
5
Connect the cable connector (female) of the macro
controller to the connector of the macro controller.
Then connect another side of the connector (male) of
the cable to the "SW. BOX" connector on the rear side
of the lens.
"SW. BOX" Connector
Lens
Cable of Macro
Controller
Macro Controller
Connecting the “VIRTUAL” Cable
(Only Models with "VIRTUAL"
Connector)
The lens is equipped with the connector labeled “VIRTUAL”
on its left side (as viewed from the camera). This connector
can be used for connection with an interface to virtual
systems. Zoom, focus and iris signals can be output in two
types of communication data; encoder pulse train and RS-
422.
* (NOTE)
Connector location may vary by models.
“VIRTUAL”
Connector
To Virtual System