MULTIMEDIA PROJECTOR WX6000 / SX6000 User Commands Revision 1 © 2012 CANON INC.
WX6000 / SX6000 User Commands Table of Contents 1. Overview ................................................................................................................. 1 2. Communication Specifications................................................................................. 2 Communication Specifications ................................................................................................................... 2 Usable Character Codes.................................................
WX6000 / SX6000 User Commands DZOOM_RAT............................................................................................................................ 36 ERR ........................................................................................................................................... 37 FINE_GAMMA_R .................................................................................................................... 38 FINE_GAMMA_G ....................................................
WX6000 / SX6000 User Commands 1. Overview These specifications describe the methods of controlling both the Projector WX6000 / SX6000 from the PC over an RS-232C connection or LAN. Virtually all operations possible with the remote control can be controlled from the PC. The following symbols are used in these specifications: Symbol Description △ Space (20h) with 0 or more characters, or other separator. □ Space (20h) with 1 or more characters, or other separator. Separator between parameters.
WX6000 / SX6000 User Commands 2. Communication Specifications Communication Specifications The projector can be controlled via RS-232C or LAN connection.
WX6000 / SX6000 User Commands Usable Character Codes Use ASCII codes in the red and blue areas. No distinction is made between double-byte characters and single-byte characters. Do not use double-byte or triple-byte characters. They will all be recognized as single-byte characters. Uppercase and lowercase versions of the same alphabetic characters will be recognized as the same character (case insensitive).
WX6000 / SX6000 User Commands Communication System (Serial) Item Specifications Communication system RS-232-C Start-stop synchronization Semi-duplex communication Transmission speed 19.2 Kbps Character length 8 bits / character Stop bit 2 bits Parity None Transmission format Variable-length records with terminals as delimiters Maximum transmission length Maximum of 256 characters (bytes) including delimiters. Delimiters are one of the following: CR, LF, CR+LF, Null (0).
WX6000 / SX6000 User Commands Commands Transmissions sent from the PC to the projector. Transmission format △ △ Character strings consisting of 0 or more alphanumeric characters. One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h) Type Possibilities of responses from the projector ■: possible, □: not possible Type Description Commands with a command character string length of 0. No command processing is performed.
WX6000 / SX6000 User Commands Response Transmissions sent from the Projector to the PC in response to commands from the PC. Transmission format Character strings consisting of one or more ASCII characters. The first two characters are always one lowercase letter and a : (colon). The first character indicates the response type. Response type Meaning Example i State response i:OK i:BUSY etc. w Warning w:USER_COMMAND..
WX6000 / SX6000 User Commands Other Transmission recognition On the receiving side (the Projector), the data that is able to be received within the character interval of Tc is held, and the transmission is considered received when the delimiter is received. If the character interval received exceeds the Tc or if a delimiter is not received within 256 characters, all data already received is lost, and the mode is reset to standby to receive commands again.
WX6000 / SX6000 User Commands 3. Communication Flow Transmission sent At the PC, the transmission is sent within character intervals of Tc (character interval timeout). Transmission received At the Projector, the data that is able to be received within the character interval of Tc is held, and the transmission is considered received when the delimiter is received.
WX6000 / SX6000 User Commands 4.
WX6000 / SX6000 User Commands - 10 -
WX6000 / SX6000 User Commands 5.
WX6000 / SX6000 User Commands Commands Item Description 36 KREP Key repeat 37 LAMP Lamp output setting 38 LAMPCOUNTER Lamp ON time inquiry 39 LMPWRN Lamp warning indication at startup 40 MAIN Side control operation emulation 41 MEMCADJ Memory color adjustment 42 MODE Control mode switch 43 MUTE Mute control 44 NR Noise reduction 45 POWER This controls the power supply 46 PRODCODE Product information inquiry 47 RC Remote control operation emulate 48 RGBGAIN RGB gain
WX6000 / SX6000 User Commands 6. Details of Commands Descriptions of each command are provided starting from the next page. The command descriptions have the format shown below. Alphabetic command name This briefly describes the command function. Format This indicates the command format. Environment This defines the environments that support the command (power supply state, input signal state).
WX6000 / SX6000 User Commands 6AXADJ 6-axis adjustment ON / OFF Format 6AXADJ=<6-axis adjustment parameter:ID> GET□6AXADJ / ?△6AXADJ <6-axis adjustment parameter:ID> ON This sets the 6-axis adjustment to ON. OFF This sets the 6-axis adjustment to OFF. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands 6AXR-Y 6-axis correction R-Y hue / saturation settings Format 6AXR=▽▽ 6AXG=▽▽ 6AXB=▽▽ 6AXC=▽▽ 6AXM=▽▽ 6AXY=▽▽ GET□6AXR / GET□6AXG / ?△6AXR ?
WX6000 / SX6000 User Commands AMBADJ Ambient light correction adjustment ON / OFF Format AMBADJ= GET□AMBADJ / ?△AMBADJ ON This sets the ambient light correction adjustment to ON. OFF This sets the ambient light correction adjustment to OFF.
WX6000 / SX6000 User Commands AMBLEVEL Ambient light level settings Format AMBLEVEL= GET□AMBLEVEL / ?△AMBLEVEL WEAK This sets the ambient light level to WEAK. MIDDLE This sets the ambient light level to MIDDLE. STRONG This sets the ambient light level to STRONG. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if ambient light level was set properly.
WX6000 / SX6000 User Commands AMBTYPE Ambient light type settings Format AMBTYPE= GET□AMBTYPE / ?△AMBTYPE TG This sets the ambient light type to Tungsten. FL This sets the ambient light type to Fluorescent. FL_H This sets the ambient light type to Fluorescent H. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if ambient light type was set properly.
WX6000 / SX6000 User Commands ASELA1 Analog PC-1 audio terminal selection Format ASELA1= GET□ASELA1 / ?△ASELA1 1 Audio In 1 2 Audio In 2 OFF Turned off Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when audio selection was successfully completed.
WX6000 / SX6000 User Commands ASELA2 Analog PC-2 Audio terminal selection Format ASELA2= GET□ASELA2 / ?△ASELA2 2 Audio In 2 2 Audio In 2 OFF Turned off Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response ''i:OK'' is returned when audio selection was successfully completed.
WX6000 / SX6000 User Commands ASELC Component audio terminal selection Format ASELC= GET□ASELC / ?△ASELC 1 Audio In 1 2 Audio In 2 OFF Turned off Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when audio terminal selection was completed successfully.
WX6000 / SX6000 User Commands ASELD Digital PC audio terminal selection Format ASELD= GET□ASELD / ?△ASELD 1 Audio In 1 2 Audio In 2 OFF Turned off Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when audio terminal selection was completed successfully.
WX6000 / SX6000 User Commands ASELH HDMI audio terminal selection Format ASELH= GET□ASELH / ?△ASELH H HDMI audio 1 Audio In 1 2 Audio In 2 OFF Turned off Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when audio terminal selection was completed successfully.
WX6000 / SX6000 User Commands ASPECT Screen settings Format ASPECT= GET□ASPECT / ?△ASPECT AUTO Auto 4:3 4:3 16:9 16:9 16:10 16:10 ZOOM Zoom TRUE Real Environment Power Input OFF ON PM Parameter D-RGB A-RGB COMP HDMI None X O X AUTO ○ ○ ○ ○ ○ 4:3 ○ ○ ○ ○ ○ 16:9 ○ ○ ○ ○ ○ 16:10 ○ ○ × *1 *2 ZOOM × × ○ *3 *4 TRUE *5 *5 *5 *5 ○ *1 Enabled when "HDMI input" setting is PC or "HDMI input" is auto an
WX6000 / SX6000 User Commands Example Setting > ASPECT=16:9 This sets the screen size to 16:9. < i:OK Reference > GET ASPECT or ?ASPECT This retrieves the screen size. < g:ASPECT=TRUE *Commands are indicated by ">", and responses are indicated by "<".
WX6000 / SX6000 User Commands AUTOPC Auto PC Format AUTOPC△ Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X O X X X Response "i:OK" is returned if the control was executed properly. For details on other responses, refer to the "Error List". Description (1) (2) (3) (4) (5) This executes Auto PC. This command is identical to pressing the “AUTOPC” button on the remote control.
WX6000 / SX6000 User Commands AUTOSETEXE Auto setup Format AUTOSETEXE□ INPUT Automatic signal sensing execution Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response i:OK” is returned when the automatic processing was completed successfully. For details on other responses, refer to the "Error List". Description (1) (2) This command is used to execute auto setup.
WX6000 / SX6000 User Commands AVOL Audio volume adjustment Format AVOL=
WX6000 / SX6000 User Commands BLANK BLANK function Format BLANK= GET□BLANK / ?△BLANK ON BLANK ON OFF BLANK OFF Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET BLANK' or '?BLANK', current BLANK status is returned as 'g:BLANK=ON' 'g:BLANK=OFF' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands BRI Brightness setting Format BRI= GET□BRI / ?△BRI Setting values for are -20 to 20. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET BRI' or '?BRI', current brightness is returned as 'g:BRI=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands COLOR_TEMP Color temperature setting Format COLOR_TEMP= GET□COLOR_TEMP / ?△COLOR_TEMP Setting values for are -17 to 21. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if color temperature was set properly.
WX6000 / SX6000 User Commands COMVER User command version inquiry Format GET□COMVER / ?△COMVER Environment Power OFF ON Input PM D-RGB A-RGB COMP - HDMI None - Response Returns the user command version as g:COMVER="" For details on other responses, refer to the "Error List". :=99.9999 Description (1) (2) (3) This inquires about the user command version of the projector.
WX6000 / SX6000 User Commands CONT Contrast setting Format CONT= GET□CONT / ?△CONT Setting values for are -20 to 20. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET CONT' or '?CONT', current contrast setting is returned as 'g:CONT=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands DGAMMA Dynamic gamma Format DGAMMA= GET□DGAMMA / ?△DGAMMA OFF Off WEAK Weak MIDDLE Middle STRONG Strong Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands DZOOM_POS DZOOM position setting Format DZOOM_POS=, GET□DZOOM_POS / ?△DZOOM_POS is a signed integer indicating the central position of the enlarged input image. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X O O O O X Response "i:OK" is returned when the DZOOM position setting was completed successfully.
WX6000 / SX6000 User Commands DZOOM_RAT DZOOM ratio setting Format DZOOM_RAT= GET□DZOOM_RAT / ?△DZOOM_RAT 1 same size (DZOOM disabled) 1.5 1.5x 2 2x 3 3x 4 4x 5 5x 6 6x 8 8x 10 10x 12 12x Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X O O O O X Response "i:OK" is returned if DZOOM ratio was set properly.
WX6000 / SX6000 User Commands ERR Error information inquiry Format GET□ERR / ?△ERR Environment Power OFF ON Input PM D-RGB A-RGB - COMP HDMI None - Response Returns the current error information as 'g:ERR=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands FINE_GAMMA_R Fine gamma (R) adjustment Format FINE_GAMMA_R=, , ・・・, GET□FINE_GAMMA_R / ?△FINE_GAMMA_R Adjustment values for are 0 to 1024.
WX6000 / SX6000 User Commands FINE_GAMMA_G Fine gamma (G) adjustment Format FINE_GAMMA_G=, , ・・・, GET□FINE_GAMMA_G / ?△FINE_GAMMA_G Adjustment values for are 0 to 1024.
WX6000 / SX6000 User Commands FINE_GAMMA_B Fine gamma (B) adjustment Format FINE_GAMMA_B=, , ・・・, GET□FINE_GAMMA_B / ?△FINE_GAMMA_B Adjustment values for are 0 to 1024.
WX6000 / SX6000 User Commands FLTWRN Filter warning indication at startup Format FLTWRN= GET□FLTWRN / ?△FLTWRN OFF Turned off ON Turned on Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when setting of filter warning indication at startup was completed successfully.
WX6000 / SX6000 User Commands FREEZE Freeze status Format FREEZE= GET□FREEZE / ?△FREEZE ON Image now frozen OFF Image now not frozen Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X O O O O X Response "i:OK" is returned if the parameter was set properly. For 'GET FREEZE' or '?FREEZE', current freeze status is returned as 'gFREEZE=ON' 'g:FREEZE=OFF' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands GAMMA Gamma adjustment Format GAMMA= GET□GAMMA / ?△GAMMA Setting values for are -10 to 10. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET GAMMA' or '?GAMMA', current gamma adjustment is returned as 'g:GAMMA=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands HDMI_IN HDMI input setting Format HDMI_IN= GET□HDMI_IN / ?△HDMI_IN AUTO Select this when connecting to an AV equipment. Image processing and menu displays are adjusted respective to the connected video equipment. PC Select this when connecting to a computer Image processing and menu displays are adjusted respective to the connected computer.
WX6000 / SX6000 User Commands HDMI_OVSCAN HDMI overscan setting Format HDMI_OVSCAN= GET□HDMI_OVSCAN / ?△HDMI_OVSCAN OFF Turns overscan to OFF ON Turns overscan to ON Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - - - O O Response "i:OK" is returned if HDMI overscan was set properly.
WX6000 / SX6000 User Commands HUE Hue setting Format HUE= GET□HUE / ?△HUE Setting values for are -20 to 20. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET HUE' or '?HUE', current hue setting is returned as 'g:HUE=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands IMAGE Image mode setting Format IMAGE= GET□IMAGE / ?△IMAGE STANDARD Standard PRESENTATION Presentation VIVID_PHOTO Vivid photo PHOTO_SRGB Photo / sRGB DCM_SIM DICOM Sim* DYNAMIC Dynamic VIDEO Video CINEMA Cinema USER_1 User 1 USER_2 User 2 USER_3 User 3 USER_4 User 4 USER_5 User 5 * Only available on DICOM models.
WX6000 / SX6000 User Commands Setting (5) Commands related to the settings Dynamic gamma FINE_GAMMA_R∼B Memory color adjustment MEMCADJ RGB gain / offset adjustment RGBGAIN / RGBOFFSET Lamp mode LAMP 6-axis adjustment 6AXADJ 6-axis color correction 6AXR∼Y The current image quality can be acquired using the applicable GET command. ("GET IMAGE") Example Setting > IMAGE=PRESENTATION This sets the image mode to "Presentation".
WX6000 / SX6000 User Commands IMAGEFLIP Flip display Format IMAGEFLIP= GET□IMAGEFLIP / ?△IMAGEFLIP NONE None CEILING Ceiling REAR Rear projection REAR_CEILING Rear projection with ceiling Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands INPUT Input selection Format INPUT= GET□INPUT / ?△INPUT D-RGB Digital PC A-RGB1 Analog PC-1 A-RGB2 Analog PC-2 COMP Component HDMI HDMI Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands KREP Key repeat Format KREP= GET□KREP / ?△KREP OFF Turned off ON Turned on Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when Key repeat parameter was completed successfully. For 'GET KREP' or '?KREP', current Key repeat setting is returned as ' g:KREP=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands LAMP Lamp output setting Format LAMP= GET□LAMP / ?△LAMP NORMAL Normal SILENT Silent cooling Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET LAMP' or '?LAMP', current lamp output is returned as 'g:LAMP=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands LAMPCOUNTER Lamp ON time inquiry Format GET□LAMPCOUNTER / ?△LAMPCOUNTER Environment Power OFF ON Input PM D-RGB A-RGB COMP - HDMI None - Response Returns current lamp on time as 'g:LAMPCOUNTER=""' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands LMPWRN Lamp warning indication at startup Format LMPWRN= GET□LMPWRN / ?△LMPWRN OFF Turned off ON Turned on Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned when setting of lamp warning indication at startup was completed successfully.
WX6000 / SX6000 User Commands MAIN Side control operation emulation Format MAIN□ POWER POWER button POWER_OFF POWER button pressed twice MENU MENU LENS LENS INPUT INPUT UP UP UP+REP Hold down the UP button *-REP Release the button DOWN DOWN DOWN+REP Hold down the DOWN button *-REP Release the button LEFT LEFT LEFT+REP Hold down the LEFT button *-REP Release the button RIGHT RIGHT RIGHT+REP Hold down the RIGHT butto
WX6000 / SX6000 User Commands MEMCADJ Memory color adjustment Format MEMCADJ= GET□MEMCADJ / ?△MEMCADJ OFF No adjustment MEM_L Memory color adjustment - light MEM_M Memory color adjustment - medium MEM_H Memory color adjustment - heavy Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response i:OK' is returned when memory color has been adjusted successfully.
WX6000 / SX6000 User Commands MODE Control mode switch Format REMOTE LOCAL GET□MODE / ?△MODE Environment Power OFF ON Input PM D-RGB A-RGB - COMP HDMI None - Response "i:OK" is always returned with the control mode switch setting. For 'GET MODE' or '?MODE', current control mode is returned as 'g:MODE=REMOTE' 'g:MODE=LOCAL' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands MUTE Mute control Format MUTE= GET□MUTE / ?△MUTE ON Disables the audio / beep sound. OFF Enables the audio / beep sound. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands NR Noise reduction Format NR= GET□NR / ?△NR OFF Off WEAK Weak MIDDLE Middle STRONG Strong Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X X O O O Response "i:OK" is returned if noise reduction was set properly.
WX6000 / SX6000 User Commands POWER This controls the power supply Format POWER□ GET□POWER / ?△POWER ON OFF Power ON Power OFF Environment Power OFF ON Input PM D-RGB A-RGB COMP - HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET POWER' or '?POWER', current power supply status is returned as shown in the table below.
WX6000 / SX6000 User Commands PRODCODE Product information inquiry Format GET□PRODCODE / ?△PRODCODE Environment Power OFF ON Input PM D-RGB A-RGB COMP - HDMI None - Response Product name is returned as g:PRODCODE="" For details on other responses, refer to the "Error List". WX6000 / SX6000 Description (1) (2) This inquires about the product name of the projector.
WX6000 / SX6000 User Commands RC Remote control operation emulate Format RC□ POWER POWER button POWER_OFF POWER button pressed twice MENU MENU EXIT EXIT INPUT INPUT DPC DIGITAL APC1 ANALOG PC1 APC2 ANALOG PC2 HDMI HDMI COMP COMPONENT ASPECT ASPECT AUTOPC AUTOPC UP UP UP+REP Hold down the UP button *-REP Release the button DOWN DOWN DOWN+REP Hold down the DOWN button *-REP Release the button LEFT LEFT LEFT+REP H
WX6000 / SX6000 User Commands * After setting the status of the button to be pressed down, send a command from the PC to release the pressed status after predetermined time. . * Although emulation parameters for both values and function are available for the common key for 1/DZOOM+, 3/VOL+, 4/DZOOM-, 6/VOL- and 9/MUTE, there is no difference in operation so that it works in the same manner as when the "Common key" on the remote controller is pressed.
WX6000 / SX6000 User Commands RGBGAIN RGB gain adjustment Format RGBGAIN=▽▽ GET□RGBGAIN / ?△RGBGAIN Setting values for are -60 to 60. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands RGBOFFSET RGB offset adjustment Format RGBOFFSET=▽▽ GET□RGBOFFSET / ?△RGBOFFSET Setting values for are -60 to 60. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands ROMVER ROM version inquiry Format GET□ROMVER / ?△ROMVER Environment Power OFF ON Input PM D-RGB A-RGB - COMP HDMI None - Response ROM version of the firmware is returned as g:ROMVER="" For details on other responses, refer to the "Error List". :=99.999999 Description (1) (2) This inquires about the version of the firmware. This inquiry can be executed in any status provided that AC power is supplied to the projector.
WX6000 / SX6000 User Commands SAT Color saturation setting Format RGBGAIN=▽▽ GET□RGBGAIN / ?△RGBGAIN Setting values for are -20 to 20. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly.
WX6000 / SX6000 User Commands SAVEIMGPROF Create, save, delete user memory / Create user memory status Format SAVEIMGPROF= USER_1 Save to User 1 USER_2 Save to User 2 USER_3 Save to User 3 USER_4 Save to User 4 USER_5 Save to User 5 DEL_ALL Delete all User memory 0 User memory not created 1 User memory created Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X O O O O
WX6000 / SX6000 User Commands SCRNASPECT Screen aspect setting Format SCRNASPECT= GET□SCRNASPECT / ?△SCRNASPECT 16:10 16:10 16:9 16:9 display 4:3 4:3 display 16:10_DIS 16:10 digital image shift 16:9_DIS 16:9 digital image shift 4:3_DIS 4:3 digital image shift *Not available with WX6000 *Not available with SX6000 Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the
WX6000 / SX6000 User Commands SHARP Sharpness setting Format SHARP= GET□SHARP / ?△SHARP Setting values for are -10 to 10. Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response "i:OK" is returned if the parameter was set properly. For 'GET SHARP' or '?SHARP', current sharpness setting is returned as 'g:SHARP=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands SIGNAL_INFO Input signal information inquiry Format GET□SIGNAL_INFO / ?△SIGNAL_INFO Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response Current input signal information is returned as 'g:SIGNAL_INFO=""' For details on other responses, refer to the "Error List". Description (1) (2) This acquires the status of the input signal entering the projector.
WX6000 / SX6000 User Commands SIGNALSTATUS Signal status inquiry Format GET□SIGNALSTATUS / ?△SIGNALSTATUS Environment Power Input OFF ON PM X O X D-RGB A-RGB COMP HDMI None - Response Current image signal input status is returned as 'g:SIGNALSTATUS=' For details on other responses, refer to the "Error List".
WX6000 / SX6000 User Commands TEMP Temperature sensor value inquiry Format GET□TEMP / ?△TEMP Environment Power OFF ON Input PM D-RGB A-RGB - COMP HDMI None - Response For 'GET TEMP' or '?TEMP', temperature sensor value is returned as 'TEMP=,,…,' Description (1) There are cases when number of sensors is 0. In this case, there will not be a comma. Example > GET TEMP or ?TEMP This retrieves the temperature sensor value. < g:TEMP=1,80.
WX6000 / SX6000 User Commands TPTN Test pattern Format TPTN= GET□TPTN / ?△TPTN < Test pattern parameter: ID> OFF Turned off CB1 Color bar SSH1 Stair step H No.1 SSH2 Stair step H No.2 SSH3 Stair step H No.3 SSV1 Stair step V No.1 SSV2 Stair step V No.2 SSV3 Stair step V No.3 RTF1 Raster 100% White RTF2 Raster 100% Red RTF3 Raster 100% Green RTF4 Raster 100% Blue RTH1 Raster 50% White RTH2 Raster 50% Red RTH3 Raster 50% Green RTH4 Raster 50% Blue CKR1 Checker No.
WX6000 / SX6000 User Commands Reference > GET TPTN or ?TPTN GET TPTN or ?TPTN Test pattern is acquired. < g:TPTN=OFF *Commands are indicated by ">", and responses are indicated by "<".
WX6000 / SX6000 User Commands 7. Error List Item Code TYPE Error character strings Error Remedy 1 0001 e BAD_SEQUENCE Communication sequence error Wait until a response is received before sending the next command. 2 0002 e INVALID_COMMAND Invalid (undefined) command. Send a valid command. 3 0004 e INVALID_FORMAT Invalid command format. Send the command in the valid format.
WX6000 / SX6000 User Commands Item Code TYPE Error character strings 201F e INVALID_SIGNAL 17 0801 e INVALID_VALUE 1002 e NO_LOGO_CAPTURED 1003 e IP_NOT_AVAILABLE 1004 e 1005 e 18 1010 e 1011 e 2020 e 203X e - i 19 Error Cannot execute command with current input signal. Numerical parameters are invalid or outside the specified range. Cannot execute command because the user image is not registered. Cannot execute PROGRESSIVE conversion. Remedy Change the input signal.
WX6000 / SX6000 User Commands 8.
WX6000 / SX6000 User Commands Limitations in input source? YES Incorrect input source? Requires input signal? YES YES NoYES input signal? Invalid input signal? Numerical parameter outside the specified range? YES "INVALID_SOURCE (**)" NO YES "NO_SIGNAL" "INVALID_SIGNAL (**)" "INVALID_VALUE" User command is executable FINISHED - 79 -
