Technical information

4-82
SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
##nnn : Service error code
START TIME : Communication start date and time (on 24 hour clock)
OTHER PARTY : Telephone number sent from other party
MAKER CODE : Maker code
[1000 1000] Indicates a Canon fax
lower nibble
upper nibble
RCV V.8 FRAME : Received V.8 protocol signal
SYMBOL RATE : Symbol rate used for the primary channel
TX LVL REDUCTION : 0 (Fixed)
ERR ABCODE : Code output by the modem when an error occurred (Not used in the
field)
ERR SECTXB : Transmit status of the modem when an error occurred (Not used in the
field)
ERR SECRXB : Received status of the modem when an error occurred (Not used in the
field)
RX/TX : Received/transmitted protocol signal
bit 1 to bit 96 of received/transmitted DIS, DCS, or DTS
If no service errors have occurred in the past, the above report will not be output.
Figure 4-38 System Dump List (2/2)
NOTE