Technical information

4-73
SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
7.1.2 Service report output functions
The fax outputs service data setting status, past communications history reports.
a) List of service reports
The fax outputs the service reports shown below.
Report type Operations
1. System data list In the service mode, and select SERVICE REPORTS using the
button. Press the OK button; then, select the type of list to
generate using the button.
2. System dump list
3. System data list & System
dump list
Service activity report If you set bits 0 and 1 of #1 SSSW SW01 in the service
(with service error code mode, the service error code and dump list are indicated on
and dump list) the activity report (sending/receiving).
▲
▲
▲
▲