Scanner User Manual

6-5
Chapter 6 Web Menu (Administrator Mode)
2. Logging In to the Web Menu
You can log in to the Web Menu using the following procedure.
IMPORTANT
Use the device name or the IP address assigned to the scanner as the URL for accessing the Web Menu. For details on the device name and
the IP address, see “Configuring Administrator Settings” on p. 3-8.
1. Turn the scanner ON.
2. Log in to [Administrator setting], open the network
settings, and confirm the device name or the IP
address. (See “Configuring Administrator Settings”
on p. 3-8.)
3. Launch the Web browser on the computer.
4. Enter the device name or the IP address as the URL
to open the Web Menu.
Ex.) http://scanfront300 when the device name is ScanFront300,
and http://172.19.xxx.xxx for the IP address.
Hint
If the Web Menu does not appear in the desired language,
select the desired language in the [Language] box to switch the
Web Menu display.
5. Click [Login] to log in to the Web Menu (Administrator
Mode).
IMPORTANT
• If a password has been set under [Administrator setting] on
the scanner, enter the Administrator password to log in.
• Passwords are case-sensitive. Make sure to enter the
password correctly.