User`s guide

82
When the message that indicates the paper jam does not disappear
If a message such as <
カセット 1 シタ
>, <
キュウシ エリア
> or <
リョウメン ユニット
> on
the display does not disappear even after removing the jammed paper when the
optional duplex unit or/and paper feeders are installed, the message indicates that
paper is jammed in the paper source of the paper feeder or the duplex unit bottom
cover area. Inspect the paper source of the paper feeder and the duplex unit bottom
cover, and remove the jammed paper using the following procedure.
IMPORTANT
In case you remove jammed paper when the duplex unit is installed in the printer, the
data being printed will be deleted because you have to turn the printer OFF. After
removing the jammed paper, perform printing again.
■ When the duplex unit is not installed
1
Open the top cover.
IMPORTANT
Raise the top cover slowly and firmly, and open it completely until it stops. If any
jammed paper is removed when the top cover is not opened completely, it may
result in damage to the printer.
2
Pull out the paper cassette.
3
Open the multi-purpose tray, open the toner cover, and then
take out the toner cartridge.
4
Close the toner cover and the multi-purpose tray.