User`s guide

41
4 Before loading transparencies or labels, fan them in small
batches and align the edges.
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
• Be sure to fan the transparencies or labels thoroughly before loading them. If they
are not fanned enough, this may result in misfeeds or paper jams.
• When fanning or aligning the transparencies, try to hold the edge of paper as much
as possible to avoid touching the printing side.
• Take care not to mark or stain the printing surface of the transparencies with
fingerprints, dust, or oil. This may result in poor print quality.
5 Gently load the stack of paper with the printing side facing up
until it touches the back of the tray.
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
Thoroughly fan in small batches Tap the edges on a
flat surface a few times
Paper limit mark