User`s guide

3
The control panel indicators and display will illuminate, and the printer will perform
a self-diagnostic test to check the status of the main unit and optional
accessories.
If no abnormality is found during the self-diagnostic test, the
オンライン
and
印刷可
indicators and the indicator for selected paper source will illuminate, and <
00 イ
ンサツ カノウ
>, <
00 LIPS
>, <
00 N201
>, or <
00 ESC/P
> appears on the
display, indicating that the printer is ready to print.
The following information appears on the display:
Turning the Printer OFF
Follow the instruction below to turn the printer OFF.
IMPORTANT
•
If the printer is used on a network, make sure that other computers are not sending print
data into the printer before turning the printer OFF.
•
If you turn the printer OFF when the
ジョブ
indicator is on, all print data remaining in the
printer memory will be erased. If you have necessary print data remaining in the printer,
wait until it is output or press [
リセット
], then select <
ハイシュツ
> to output the data before
turning the printer OFF.
•
Do not turn the printer OFF when the printer is in the following status:
- During printing
- While running a self-diagnostic test immediately after turning the printer ON
- When the message that NVRAM is initializing or writing data is displayed
印刷可 メッセージ ジョブ
オンライン
ユーティリティ
ジョブ
リセット
セットアップ
実行
ジョブキャンセル
給紙選択
00 ｲﾝｻﾂ ｶﾉｳ A4
00 ｲﾝｻﾂ ｶﾉｳ A4
Printable and not
processing print data
Size of paper in the
currently selected
paper source