QE-12E-0254 S200/S200SP September 28, 2001 Service Manual Service Manual (Simplified Manual) Distribution DETAILS The simplified Service Manual has been distributed. Details are shown below. Description S200/S200SP Simplified Manual Part Number QY8-1380-000 Remarks As product exchange servicing applies, only required data is included.
S200 / S200SP Simplified Manual QY8-1380-000 1 2 3 4 5 6 7 Attach Product / Option / Consumable list Specifications Error code list Service mode (Test print, EEPROM reset, destination setting) External view / Parts list H/W troubleshooting flowchart Special Service Information Service Test Print BPQA-21 Rev 01 2001.
1. Product / Option / Comsumable lists 1.
2. Specifications 2.1 Specifications Paper feeding method Resolution Print Speed HQ HS (Note) Differences from the base model BJC-2100/2100SP are in RED DeskTop serial color bubble jet printer Auto Sheed Feeding Max. 2880 dpi equiv. X 720 dpi *JPN only: 1440 dpi X 720 dpi Color Mono. Color Mono. Print Direction Print width Interface Print head Max. no. of printable sheets CL BK 1.6ppm (Color throughput pattern) 3.
2.2 Product life Whichever of the following comes first - 3 years - Color printing 3000 pages - Black printing 4500 pages 2.3 Print head spec. Type Print head Ink color Ink tank Weight Details 4 color ink cartridge integrated type BJ cartridge (same type as the C-21e) (electrically incompatible with the BC-21e) Bk/Col. 136 nozzles in a vertical line (same as the BC-21e) Bk (64 nozzles ) + Y,M,C (24 nozzles each) Droplet: Bk 30ng / Col.
3. Error Code List Errors will be displayed on the connected computer monitor. To display error codes, the BJ Status Monitor of the Windows host computer should be active. Error Code 1000 1200 1300 1400 1501 *2 1510 *2 1541 *2 *2 1542 *2 1561 *2 1562 1700 1900 5000 5100 5200 5400 5600 5B00 5C00 6100 6300 6800 *1: *2: *3: Error indication Printer is out of paper. Front cover is open. Paper JAM occurrs. BJ cartridge is not installed.*1 Bk ink low warning2 (low remaining ink) Col.
4. Service Mode Function Cleaning the BJ cartridge Deep Cleaning Paper feeding without printing Procedure Press and hold the RESET button for 2 seconds or more ( while the AC cord is plugged in) #Can be performed from the printer driver utility. Cleaning time :Approx.40seconds. Select "Deep Cleaning" from the printer driver utility. (It is necessary to connect the printer to the PC.) Cleaning time :Approx.60seconds. Click the RESET button three times.
5.
6. H/W Troubleshooting Flowchart 6.1 Printer main unit troubleshooting flowchart (Confirmation of the printer when refurbishing) Insert the AC adapter No Can CR/LF motor move opration be heard? Yes Open the front cover No Does the CRG move to the head replacement position? Yes Install the print head Close the front cover No Does the head return to home position? (Auditorily) Yes Print the "Service Test Print" * Refer to "4.Service Mode" regarding printing method.
6.2 Print head troublshooting flowchart Connect the computer via the USB I/F Nozzle check pattern printing * Refer to "4.Service Mode" regarding printing method. Yes Correct? No * Refer to "4.Service Mode" regarding printing method. Cleaning Nozzle check pattern printing Yes Correct? No Deep cleaning * Refer to "4.Service Mode" regarding printing method.
7. Service Information 7.1 Whole unit replacement 1 2 3 4 5 When the unit is exchanged as a Whole Unit (WHOLE UNIT, W/O POWER SUPPLY UNIT : 0000U019), in accordance with the following procedures: Remove the AC adapter from the printer returned by the user. Install the removed AC adapter in the whole unit. Affix the product name label. (The label has been packaged with whole unit) Perform destination setting. (See "4. Service Mode" for details) Align the print head position if the print head is installed.
7.3 Product technical information (1) Problems when evaluating Function 1 Paper feeding Paper pick-up performance problem Paper type Result Conditions Countermeasure KH-201 (Glossy side) Last two sheets fed overlapped Low temperature / low humidity Set only one sheet of paper at a As the friction between stacked paper is great, last two sheets fed overlapped.
(2) New Functions 1. Remaining ink level detection function This printer has a function to detect the remaining ink level. (Default setting: OFF) Detection method: Dot counting (counted for each Bk/Cl ink tank) Cl tank: The remaining ink level is detected by total counted dot values of 3 color ink tanks Display method: Displayed on the Status Monitor (displayed at 3 levels shown below for each Bk/Cl ink tank) Level 1: Half level of remaining ink level (approx. 40%) Level 2: "!" mark is indicated. (Approx.
3. Deep cleaning This printer has a deep cleaning function. Deep cleaning: This is a deep cleaning function in order to resolve print failure due to ink clogging the print head (The black ink is pigment-based, and clogs easier than the current dye-based ink.) *Perform from the printer driver utility. The amount of purged ink is approx. three times that of normal cleaning. 1) Excessive ink consumption when comductiong deep cleaning repeatedly. 4.
Attached Sample (Service Test Print) Check item 1 (Non ejection of ink): Total area of the sample below Check item 2 (Top margin) Print EEPROM Information -->See "4. Service Mode" for details.
