S200 Quick Start Guide

4 Remove the protective cap and tape
from the BJ Cartridge.
➥
Notes
• Do not touch the
print head nozzles or
electrical contacts.
• Do not attempt to
reattach the
protective cap once it
has been removed.
5 Place the BJ Cartridge in the holder.
5
6 Lock the BJ Cartridge into place by
lowering the lever.
Do not touch the lock lever once the print head
has been installed.
electrical
contacts
print head
nozzles
print head
7 Close the front cover.
Wait until the printer stops operation.
protective cap
tape
S200_QSG.qxd 9/21/01 4:32 PM Page 5