S200 Quick Start Guide

Follow the steps below to install the printer
driver correctly.
1 Unplug the printer and ensure the
computer is switched off.
2 Connect the cable.
3
➥
Note
If the Add New Hardware Wizard or Found New Hardware
Wizard screen appears when carrying out the following
operations, click Cancel and turn off the computer.
■■ 2 ■ Connecting the Printer to the Computer ■■■■■■■■■■■■■■
Use a USB cable.
USB cable
Recommended: Canon or other computer manufacturer cable, up to 5 meters in length.
➥
Notes
• If your computer has an earth connection, make sure that this is attached.
• If you do not intend to use the printer for a long period of time, unplug the power cord
from the power outlet.
S200_QSG.qxd 9/21/01 4:32 PM Page 3