S200 Quick Start Guide

24
Printing Maintenance
To reset the ink counter in Windows:
1.
With the printer on, click Start, then
Settings, then Printers.
2. Right-click the Canon S200 icon,
then select Properties.
3. Select the Maintenance tab, then
click the Ink Counter Reset icon.
4. Select the newly installed ink tank,
then click Execute.
To reset the ink counter in Mac OS:
1.
With the printer on, click Page Setup from the File menu.
2. Click Utilities to open the Printer Utility dialog box.
3. Select Remaining ink level setting from the drop-down menu, then click the
Ink Counter Reset icon.
4. Select the newly installed ink tank, then click Execute.
Ensure that the Low Ink Warning has been enabled. See “To
enable low ink warning in Windows,” on page 21.
If you are setting up
your printer for the first
time, perform this step
for each ink tank.
Ensure that the Low Ink Warning has been enabled. See “To
enable low ink warning in Macintosh,” on page 21.
If you are setting up your printer for the first time, perform this
step for each ink tank.
S200 QS.book Page 24 Tuesday, September 18, 2001 9:02 AM