User guide

63
Shooting
4
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the Multi Controller .
z Only one color can be specified.
z You can press the Multi Controller or to specify the
range of colors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to
swap
5
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the Multi Controller .
• Only one color can be specified.
6
Press to complete the setting, then
shoot.
z The default setting for color swap mode changes green into
white.
z You may not obtain the expected results if you use the
flash.
z The specified color and color input range will be retained
even if the camera’s power is turned off.
Downloaded From camera-usermanual.com Canon Manuals