User guide

25
Before Using the Camera—Basic Operations
Set up Menu
Menu Item Options Page/Topic
Mute On/Off* Set to [On] to silence all sounds
except warning sounds. (Basic p. 11)
Volume Off/1/2*/3/4/5 Adjusts the volume of the start-up
sound, operation sound, self-timer
sound, shutter sound and playback
sound. The volume cannot be
adjusted if [Mute] is set to [On].
Start-up Vol. Adjusts the volume of the start-up
sound when the camera is turned on.
Operation Vol. Adjusts the volume of the operation
sound that plays when any button other
than the shutter button is pressed.
Selftimer Vol.
Adjusts the volume of the self-timer sound
played 2 sec. before the shutter is released.
Shutter Volume Adjusts the volume of the sound
played when the shutter releases.
The shutter sound does not play
when a movie is recording.
Playback Vol.
Adjusts the playback volume of movies,
sound memos or recorded sounds.
Audio p. 43
Mic Level Auto*/Manual Sets method of adjustment for the
sound recording level.
Level -40 to 0 dB Sets the sound recording level.
Wind Filter On/Off* Reduces wind noise.
LCD Brightness -7 to 0* to +7
Press the Multi Controller or to
adjust the brightness. You can check
the brightness in the LCD monitor
while you are adjusting the setting.
Power Saving p. 18
Auto Power
Down
On*/Off Sets whether or not the camera
automatically powers down after a
set period of time elapses without
the camera being operated.
Display Off 10 sec./20 sec./
30 sec./1 min.*/
2 min./3min.
Sets the length of time before the
LCD monitor turns off when no
camera operation is performed.
* Default setting
Downloaded From camera-usermanual.com Canon Manuals