User guide

This camera is equipped with a power saving function. The power

will shut off in the following circumstances. Press the power button

again to restore power.

* This time can be changed.

Histogram Function

The histogram is a graph that allows you to check the brightness

of the image. The greater the bias toward the left in the graph, the

darker the image. The greater the bias toward the right, the

brighter the image.

If the image is too dark, adjust the exposure compensation to a

positive value. Similarly, adjust the exposure compensation to a

negative value if the image is too bright (p. 52).

Power Saving Function

Shooting Mode

Powers down approximately 3 minutes after the

last control is accessed on the camera. The LCD

monitor automatically turns off 1 minute* after

the last control is accessed even if [Auto Power

Down] is set to [Off]. Press any button other than

the power button or change the camera

orientation to turn the LCD monitor back on.

Playback Mode

Connected to a Printer

Powers down approximately 5 minutes after the

last control is accessed on the camera.

z The power saving function will not activate during a slide

show or while the camera is connected to a computer.

z The power saving function settings can be changed (p. 25).

Sample Histograms

Balanced ImageDark Image Bright Image

Downloaded From camera-usermanual.com Canon Manuals