User guide

118
Memory card is full. z Insert a new memory card (Basic
Guide p. 7).
z If required, download the images to a
computer and erase them from the
memory card to make space.
Memory card is not
formatted correctly.
z Format the memory card (p. 28).
z If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest
Canon Customer Support Help Desk.
SD memory card or
SDHC memory card is
write protected.
z Slide the write protect tab of the
memory card upward (p. 131).
Image is blurred or out of focus.
The camera moved when
the shutter button was
pressed.
z Refer to “ appears” (p. 117) to
confirm the camera movement.
AF-assist Beam is set to
[Off].
z In dark places where it is difficult for the
camera to focus, the AF-assist Beam
will emit to assist focusing. As the AF-
assist Beam will not function when
turned off, set it [On] to activate it
(p. 23). Take care not to obstruct the
AF-assist Beam with your hand when
used.
Subject is out of focal
range.
z Shoot with the subject at the correct
focusing distance (p. 137).
The subject is hard to
focus on.
z Use the focus lock or AF lock to
shoot (p. 48).
Subject in recorded image is too dark.
Insufficient light for
shooting.
z Set the flash to (flash on) (Basic
Guide p. 15).
The subject is
underexposed because
the surroundings are too
bright.
z Set the exposure compensation to a
positive (+) setting (p. 52).
z Use AE lock or use the spot metering
function (pp. 49, 51).
Downloaded From camera-usermanual.com Canon Manuals