Getting Started CEL-SV5DA20 ENGLISH CEL-SV7EA210
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera Battery Pack NB-6LH*1 Battery Charger CB-2LYE Wrist Strap*2 *1 Do not peel off the adhesive covering from a battery pack. *2 For attachment instructions, refer to the Camera User Guide that can be downloaded from the Canon website. • Printed matter is also included. • A memory card is not included. Compatible Memory Cards No memory card is included.
Manuals and Software You can download manuals and software from the following URL. http://www.canon.com/icpd/ • With a computer connected to the Internet, access the above URL. • Access the site for your country or region. • Adobe Reader is required to view the manuals. • You can also download software from the URL above. For instructions on downloading and installing the software, refer to the Camera User Guide available for download. • You may be requested to enter the Serial number (Body no.
Initial Preparations 3 Charge the battery pack. z Plug the power cord into the charger, then plug the other end into a power outlet. z The charging lamp turns orange, and charging begins. z When charging is finished, the lamp turns green, and you can remove the battery pack. z For details on charging time and the number of shots or recording time available with a fully charged battery pack, refer to “Specifications” in the downloadable Camera User Guide. (2) 4 Open the cover.
Initial Preparations 6 Check the card’s write-protect (1) switch and insert the memory card. (2) z Recording is not possible on memory cards with a write-protect switch when the switch is in the locked position. Move the switch in the direction of the arrow (1). z Insert the memory card with the label (2) facing as shown until it clicks into place. z When removing the card, push the memory card in until it clicks, and then slowly release it. 7 Close the cover.
Initial Preparations 9 Specify your home time zone. z Press the [ ][ ] buttons to choose your home time zone. z Press the [ ] button when finished. After a confirmation message, the setting screen is no longer displayed. z To turn off the camera, press the ON/OFF button. 10 Set the display language. z Press the [ ] button. z Press and hold the [ ] button, and then immediately press the [ ] button. z Press the [ ][ ][ ][ ] buttons to choose a language, and then press the [ button.
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn on the power and enter [ ] mode. z Press the ON/OFF button. z Set the mode switch to [ ]. z Press the [ ] button, press the [ ][ ] ], and then press buttons to choose [ the [ ] button again. z Press the [ ][ ] buttons to choose ], and then press the [ ] button. [ 2 Compose the shot.
Trying the Camera Out Recording Movies z Press the movie button to start recording, and press it again to stop. Viewing 1 Enter Playback mode. z Press the [ ] button. 2 Choose images. z To view the previous or next image, press the [ ][ ] buttons. z Movies are identified by a [ ] icon. To play movies, go to step 3. 3 Play movies. z Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button again. z Playback now begins, and after the movie ] is displayed.
CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan © CANON INC.
