PowerShot SX1 IS Camera User Guide

76
, ,
To Cancel the Self-Timer:
Follow Step 3 to select .
1
Select [Drive Settings].
1. Press the MENU button.
2. In the menu, use the
or button to select [Drive
Settings].
3. Press the button.
2
Make settings.
1. Use the or button to
select [Self-Timer].
2. Use the or button to
set.
3. Press the button.
4. Press the MENU button.
3
Press the button.
1. Use the or button to
select the self-timer mode.
• Pressing the MENU button
while this screen is displayed
will display the [Drive Settings]
screen in Step 2.
4
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Control] (p. 112), the lamp will
light 2 seconds before the flash fires.
COPY