Wireless Setup Guide

21
Using the Wireless Networking Function
This section explains how to use the wireless networking function to download camera images
to a computer and print them. Make sure that you have already configured the settings
described in Wireless Network Settings for the Computer and Camera.
Actions Possible with the Camera Connected
to a Computer
The following describes the actions possible when the camera is connected over a wireless
network to a computer or when it is connected via an interface cable (wired connection).
See the Software & Wireless Guide for details. The screen contents and procedures may differ
slightly according to the system environment you are using.
*For Software & Wireless Guide
Print settings for printing from the camera via a computer, can only be set during a wireless
connection. Settings cannot be made when connecting via the interface cable (wired
connection).
Camera Mode Action
Wireless
Connection
Wired
Connection
Reference
Page*
Playback Mode
Download camera images to the
computer using computer commands.

p. 49
Download camera images to the
computer using camera commands
(direct transfer).

p. 90
Send images to the computer and print
them out on a connected printer using
camera commands (printing via a
computer).
 ×
p. 92
Shoot from the computer (remote
shooting).
 ×
p. 95
Upload images from the computer to the
camera.

p. 63
Add My Camera files to the camera.

p. 69
Shooting Mode
Save images automatically to the
computer while shooting (auto transfer).
 ×
p. 98
Do not attempt to perform other actions in the Camera Control Window on
the computer while images are being transferred between the camera and
computer over the wireless network.