Wireless Setup Guide

Wireless Network Settings for the Computer and Camera
12
9 Select [I am using an access point] and click
[Next].
This window will not appear if the wireless
configuration information is automatically
detected. Proceed to the next step.
10 Enter the settings information from the
checklist (p. 6) and click [Next].
Some of the wireless configuration information
may already be entered if it was automatically
detected. Make sure the information is the same
as entered in the checklist, and enter the
information required for the remaining settings
categories.
11 Confirm the displayed information and click
[Next].
The registration name you enter here will display
in the camera's [Target Device] category.
Wireless Network Already in Use
Perform steps 1-8 (pp. 9-11) before proceeding below.
If you do not understand the terminology in the window, place the mouse cursor
over it. A brief explanation will display at the bottom of the window.
If the "Insufficient space in camera" message appears, delete target devices that are
not needed and proceed to the next step.
A