User Guide

18
2
Trim the image.
Changing the Size of the Trimming Frame
• Press the zoom lever to adjust the size of the trimming
frame.
• The trimming frame can be changed to a minimum selection of
approximately half the displayed image (in width and height) or a
maximum selection that is virtually the same size as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.
Moving the Trimming Frame
• Move the trimming frame using the up, down, right and left
buttons.
Rotating the Trimming Frame
• You can rotate the trimming frame by pressing the DISP.
button.
3
Press the SET button to close the setting menu.
Pressing the MENU button cancels the settings.
• The trimming setting only applies to one image.
• The trimming setting is canceled with the following operations.
• When you set the trimming settings for another image.
• When you close the Print mode (when you turn the camera power
off, change the camera mode,terminate a wireless connection to
the printer or detach the connection cable).
• The shooting date or part of the date which has been embedded
in images using a camera with the Postcard Date Imprint mode
may not be printed properly depending on the trimming setting.
• The paper size and page layout settings determine the shape of
the trimming frame.
• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.