ダイレクトプリントユーザーガイド Direct Print User Guide Direct Print User Guide パソコンがなくても大丈夫！ カメラとプリンターを接続してかんたんに印刷 You don’t even need a computer ! Just connect your camera to your printer and print CDI-M214-010 DPUG11 XXXXXXX © 2005 CANON INC.
ENGLISH Introduction —Confirm Your Printer Model and the Section that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camera to the printer and confirm the icon displayed in the camera's LCD monitor. • For instructions on camera and printer connection methods, please refer to page 8.
Confirm your printer model. Read the page below.
For the latest information regarding connections between Canon printers and cameras, please refer to the following URL: http://web.canon.jp/Imaging/BeBit-e.html http://www.canon.com/pictbridge/ PictBridge Compliance This camera complies with the industry standard “PictBridge”*. This allows you to also connect your camera to non-Canon PictBridge compliant printers and print images with simple operations using the camera buttons.
Table of Contents Direct Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Allows for Printing without the Use of a Computer . . . . 6 Various Printing Operations Can Be Performed . . . . . . . 6 You Can Also Perform the Following Printing Operations . .7 Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . . 7 Printing Multiple Images on a Sheet of Paper . . . . . . . . . 7 ID Photo Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
/ Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge/Wireless. . . . . . 31 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Print after Changing the Print Settings . . . . . . . . . . . . . .32 Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .34 Setting the Date Printing Option . . . . . . . . . . . . . . . . . . .
Printing with Bubble Jet Printers using Bubble Jet Direct . .67 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Settings that Can Be Set with the Camera. . . . . . . . . . . . . . . . .70 / SELPHY CP Series Printers using PictBridge/ Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Direct Print Allows for Printing without the Use of a Computer Connect the camera to the printer wirelessly* or with the appropriate cable. Image selection and printing is operated from the camera. * Connecting wirelessly is only possible with Canon PictBridge compliant printers. Various Printing Operations Can Be Performed* Prints to cover the entire surface of the paper. Or, prints with a border. 11/11/2005 Adds the date. Specifies which portion of the image to print.
You Can Also Perform the Following Printing Operations Printing Movies (Movie Print) 107-J006 1"25 2"50 3"75 5"00 6"25 7"50 8"75 10"00 11"25 12"50 13"75 15"00 16"25 17"50 18"75 20"00 21"25 22"50 23"75 Movie frames can be extracted at fairly regular intervals and printed on a single sheet of paper (p. 25 or p. 61). • Capable printers: Canon SELPHY CP Series Printers (With a wireless connection, only the CP600 can be used.
Connecting the Camera to the Printer Connect the camera to the printer. If you use a Canon PictBridge compliant printer, you can connect it to the camera wirelessly by using the wireless print adapter supplied with the camera. If you use the appropriate interface cable supplied with the camera, you can connect it to, and print using, Canon PictBridge compliant printers, Canon Direct Print compatible printers, and Non-Canon PictBridge compliant printers.
Turn the printer’s power on. Set the camera to Playback mode, turn the power on and press the button. After confirming that [Target Device] is set to [1.WA-1], use the button to select [Connect] and press the button. • The camera will attempt to establish a wireless connection to the printer. • After the attempt has started, the wireless lamp on the camera and the lamp on the wireless print adapter will be blinking in blue.
• For more information on how to attach the wireless print adapter and connecting the camera to the printer wirelessly, please refer to the Advanced Camera User Guide. • In Step 5, if you continue to press the button, wireless connection will start and the screen from Step 7 will be displayed. • The following operations are not available during a camera/ printer connection. • Language settings that use the SET button and the MENU button. • Resetting the camera’s settings to default.
Place paper, ink cassette/cartridge, etc. into the printer. Connect the camera to the printer with the appropriate interface cable supplied with the camera. DIGITAL terminal Camera: Connect the cable to the DIGITAL terminal. Printer: Refer to the printer’s user guide. Some printers require specific connection cables which differ from the above cable. Please refer to the printer’s user guide. Turn the printer’s power on. Set the camera to Playback mode and turn the power on.
/ Printing with SELPHY CP Series Printers using PictBridge / Wireless Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. 1 2 12 Make sure that or displays in the upper left corner of the LCD monitor. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 13).
Print after Changing the Print Settings You can change the print settings before printing. Make sure that or displays in the upper left corner of the LCD monitor. 1 If displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 51). Sets the print effect (p. 16) Sets the date and the file number for printing (p. 15) 2 Display the images you wish to print and press the SET button. The print order screen appears.
• You cannot print the RAW images. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Selecting Print Settings Depending on the camera model, the screens that will be displayed will vary. Please also refer to the user guide that came with your printer. Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. Setting the Date and the File Number Printing Option Select [ ], then select the date and the file number printing option.
Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. On Uses the camera’s shooting information to deliver optimum prints. Off Prints without any effects. Default Print settings differ according to your printer model. Select [ ] and choose a print effect option. 1 Setting the Number of Copies Select [ ] and set the number of prints. 1 16 1 to 99 copies can be set.
Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the SET button. The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
Trim the image. 2 Changing the Size of the Trimming Frame • Press the zoom lever to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
Selecting the Paper Settings Select [Paper Settings] and press the SET button. 1 The paper size setting screen appears. Select a paper size and press the SET button. 2 The default settings and specified paper cassette size are displayed. The paper type setting screen appears. * Paper sizes vary according to region. Press the SET button. The page layout screen appears.
Select a layout. The following layout can be selected. 4 Default Print settings differ according to your printer model. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4 or (8*) images on a single sheet of paper (p. 21). ID Photo Specifies the print size and print portion of an image or a whole image as an ID photo (p. 22). Fixed Size Prints by specifying the print size of the image on a sheet of paper (p. 24).
Printing Multiple Images on a Sheet of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. 2 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper. 8* 8 images (height 4 x width 2) of the same dimensions are arranged on a single sheet of paper or a label sheet.
Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) will allow you to specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo. Refer to the party (organization) or administration requiring the photo. • The print size can be specified for only L (Large) resolution images in the camera connected to the printer.
z Selectable combination : Available print size Short Side Long Side 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.5 inch 1.8 inch 2.0 inch 1.8 inch 2.0 inch T Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (p. 18) on how to trim the image. Trimming Frame The trimming setting screen differs depending on the camera model.
Printing Images in the Fixed Size Selecting [Fixed Size] in the layout setting (p. 20) will allow you to print by specifying the print size of the image on a sheet of paper. Select the fixed print size required. Depending on the paper size, you can select print sizes as follows: Paper size 5 24 Print size Credit Card You cannot select the print size. 9 × 13 cm (L size) 89 mm × 55 mm Default 10 × 14.8 cm (Postcard size) 7 cm × 10 cm Default 4 in. × 8 in./ 10 × 20 cm (Wide size) 4 in. × 6 in.
Printing Movies (Movie Print) You can print movie frames selected automatically at fairly regular intervals laid out in index style on a single sheet of paper. Select the movie you want to print, then press the SET button. 1 The movie control panel appears. Select (Print) and press the SET button. 2 Movie Control Panel 3 4 If necessary, select [On], [Off] or [Default] in (Caption). If you set (Caption) to [On], you can print the file number and the elapsed time of the frame at the same time.
• If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.
Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide. In this section, we will explain how to print several images already specified with DPOF print settings. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. Select [Print] and press the SET button. 2 Set the print effect and paper settings as required. 3 Sets the Print Effect (p. 16) Selects the Paper Settings* (p.
Select [Print] and press the SET button. 4 • The image will start to print and, when it is completely finished, the display will revert to the standard playback mode. • If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place. • To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print in Step 3. • When the print type is set to [Index], the [Date] and [File No.
Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting.
List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly. No Ink The ink cassette has not been inserted or has run out of ink.
/ Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge / Wireless Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. 1 2 Make sure that or displays in the upper left corner of the LCD monitor. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings (p. 32).
Print after Changing the Print Settings You can change the print settings before printing. Make sure that or displays in the upper left corner of the LCD monitor. 1 If displays on the LCD monitor, please refer to Printing with Bubble Jet Printers using Bubble Jet Direct (p. 67). Sets the print effect (p. 35) Sets the date for printing (p. 34) 2 Display the images you wish to print and press the SET button. The print order screen appears.
• You cannot print RAW images and movies. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Selecting Print Settings Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model (unavailable settings will not appear in the menu). For details, refer to the user guide that came with your printer. Default Setting • The Default option is a fixed setting of the printer. • The [Date], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available.
If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [Date], dates will appear twice on the printed image. Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. On Uses the camera’s shooting information to deliver optimum prints. Off Prints without any effects.
Setting the Number of Copies Select [ ] and set the number of prints. 1 36 1 to 99 copies can be set.
Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 40) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the SET button. The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
Trim the image. 2 Changing the Size of the Trimming Frame • Press the zoom lever to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
• The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, terminate a wireless connection to the printer or detach the connection cable).
Selecting the Paper Settings Select [Paper Settings] and press the SET button. 1 The paper size setting screen appears. Select a paper size and press the SET button. 2 The following paper sizes* are available: 4" × 6", 5" × 7" or 13 × 18 cm, 8.5" × 11" or A4, CreditCard, A3, 13" × 19" or A3+ and Default. • Some sizes are not available with certain cameras and printer models. The paper type setting screen appears. * Paper sizes vary according to region.
Select a paper type and press the SET button. The following paper types can be selected. Photo 3 Prints on Photo Paper Plus Glossy paper*. Fast Photo Prints on Photo Paper Pro paper*. Plain Prints on plain paper. Default Print settings differ according to your printer model. * Canon brand paper • Other kind of paper may be used. For the usable paper, please also refer to the printer user guide. • The option you can select will depend on the printer model and paper size. The Page Layout screen appears.
Printing Multiple Images on a Sheet of Paper • Selecting [4" x 6"] in the paper size setting (p. 40) will allow you to specify the following layout settings. 2 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper. 9 9 images (height 3 x width 3) of the same dimensions are arranged on a single sheet of paper.
5 Select a layout and press the SET button. This ends the paper settings operations. The display returns to the print order screen. • Images will print with borders, even if [Borderless] was selected with the camera in the following cases: •When [Plain] is selected in the camera's [Paper Type] (cannot be selected depending on the connected printer model) •With printers equipped with an operation panel, when [Plain] is selected with the printer and [Default] is selected in the camera's [Paper Type].
Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide. In this section, we will explain how to print several images already specified with DPOF print settings. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. Select [Print] and press the SET button. 2 Set the print effect and paper settings as required. Sets the Print Effect (p. 35) 3 44 Selects the Paper Settings* (p.
Select [Print] and press the SET button. 4 • The image will start to print and, when it is completely finished, the display will revert to the standard playback mode. • If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place. • To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date in Step 3. • When the print type is set to [Index], both the [Date] and [File No.
Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting.
List of Messages The following messages may appear on the camera LCD monitor if an error occurs during a camera and printer connection. (Depending on the printer, some messages may not appear.) • Please refer to the printer’s user guide for the appropriate remedies. : Printing restarts if you select [Continue] and press the SET button. For the remedies to other messages that might appear, refer to your printer’s user guide. No Paper There is no paper set in the printer.
48 Printer error Disconnect the cable from the printer and turn off the printer power. Then reconnect the cable and turn on the printer. If the error persists, please consult the dealer where you purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the printer). Printer in use The printer is in use now. The printer automatically starts printing the images from the camera after completing the current printing.
Connection failed Disconnected A wireless connection has not been successfully established or an established connection has been cut. In such a case, first take whichever of the following steps is or are appropriate: shorten the distance between the camera and the wireless print adapter; change the direction of the camera and the angle of the adapter; change the channel settings. Then establish a wireless connection again. For the setting method, please see the Advanced Camera User Guide.
Printing with Non-Canon, PictBridge Compliant Printers Printing 1 Make sure that displays in the upper left corner of the LCD monitor. After this step, follow the procedures in the section / Printing with Bubble Jet Printers (PIXMA series/SELPHY DS series) using PictBridge/Wireless (p. 31) to print your images. However, the following menu options cannot be set. • Print Effect (p. 35):[Vivid], [NR], [Vivid+NR] • Paper Size (p.
Printing with SELPHY CP Series Printers using Canon Direct Print Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. 1 2 Make sure that displays in the upper left corner of the LCD monitor. Display the images you wish to print and press the button. If you wish to change the print settings, see Print after Changing the Print Settings below. Print after Changing the Print Settings You can change the print settings before printing.
Sets the Number of Copies (p. 53) Display the images you wish to print and press the SET button. The print order screen appears. 2 Sets the Print Style (p. 53) Sets the Printing Area (Trimming) (p. 55) Print Order Screen 3 Select print settings as required. 4 Select [Print] and press the SET button. If you press the MENU button, the display will revert to the standard playback mode and printing will not take place. • You cannot print the RAW images.
Selecting Print Settings Setting the Number of Copies 1 In the print order screen, select [ number of prints. ] and set the 1 to 99 copies can be set. Setting the Print Style (Image, Borders and Date) You can select from among the following print styles. Image Borders Date Standard Prints one image per page. Multiple* Prints eight copies of the same image on one page. ID Photo Prints a specified print size (p. 58). Borderless Prints right to the edges of the paper.
Select settings as needed. 3 Press the MENU button to end the setting selection process. 4 Print Area Frame With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly. If you have not specified a trimming setting, a frame will appear around the area of the image that will be printed, allowing you to check the portion that will be cropped.
Setting the Printing Area (Trimming) You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings. If the print style is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the SET button. The trimming frame will appear at the center of the image.
Trim the image. 2 Changing the Size of the Trimming Frame • Press the zoom lever to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size cancels the trimming setting.
• The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
Printing by Specifying the Print Size (ID Photo Print) You can specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo. Refer to the party (organization) or administration requiring the photo. The print size can be specified for only L (Large) resolution images in the camera connected to the printer. 1 2 58 In the print order screen, select [Style] and press the SET button.
z Selectable combination : Available print size Short Side Long Side 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.5 inch 1.8 inch 2.0 inch 1.8 inch 2.0 inch Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (p. 56) on how to trim the image. 3 Trimming Frame 4 The trimming setting screen differs depending on the camera model.
• The print size setting only applies to one image. • The print size setting is canceled with the following operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The shape of the trimming frame varies depending on the specified print size. • Use the LCD monitor to specify the print size settings. The trimming frame may not display correctly on a TV screen.
Printing Movies (Movie Print) You can print movie frames selected automatically at fairly regular intervals laid out in index style on a single sheet of paper. Select the movie you want to print, then press the SET button. 1 The movie control panel appears. Select (Print) and press the SET button. 2 Movie Control Panel If necessary, select [On] or [Off] in (Caption). 3 4 If you set (Caption) to [On], you can print the file number and the elapsed time of the frame at the same time.
• If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.
Printing with DPOF Print Settings For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide. In this section, we will explain how to print several images already specified with DPOF print settings. 1 In the [ (Play)] menu, select [Print Order] and press the SET button. Select [Print] and press the SET button. 2 Set the print style settings as required. 3 • See Setting the Print Style (Image, Borders and Date) (p. 53).
Select [Print] and press the SET button. 4 • The image will start to print and, when it is completely finished, the display will revert to the standard playback mode. • If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place. • To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print with the [Style] menu in Step 3.
Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed. • Printing cannot be restarted under the following circumstances. • If the print settings have been changed before restarting. • If the image for which the print settings were set has been deleted before restarting. • If the camera battery has been depleted. (In such a case, replace the battery with a fully charged one, then turn on the camera power again.
List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) • Please refer to the printer’s user guide for solutions. 66 No Paper Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly. No Ink The ink cassette has not been inserted or has run out of ink.
Printing with Bubble Jet Printers using Bubble Jet Direct Printing 1 Make sure that displays in the upper left corner of the LCD monitor. If displays, refer to / Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge / Wireless (p. 31). After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 51) to print your images. However, please note that some menus and precautions differ, as listed below.
Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button.
• The ID photo print function cannot be used. • If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image. See page 64. • To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print with the [Style] menu in Step 3.
Settings that Can Be Set with the Camera / SELPHY CP Series Printers using PictBridge/Wireless (When or connection ) appears on the camera’s LCD monitor during a Print Options Selectable with the Camera Date File No. Date/File No. Both Off Default Off Print Effect On Default Number of Prints 1 to 99 Trimming CreditCard 9 × 13 cm Paper Size 10 × 14.
/ Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge/Wireless (When or appears on the camera’s LCD monitor during a connection) Some settings are not available with certain cameras and printers.
4" × 6" 5" × 7" or 13 × 18 cm 8.5" × 11" or A4 Paper Size*1 CreditCard A3 13" × 19" or A3+ Default Photo Paper Settings Paper Type Fast Photo Plain Default Bordered Page Layout Borderless N-up*2 2/4/9/16 Default *1 Paper sizes vary according to region. *2 This option can be specified by selecting [4" x 6"] in [Paper Size].
SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When or connection) appears on the camera’s LCD monitor during a Print Options Selectable with the Camera Number of Prints 1 to 99 SELPHY Bubble Jet CP series Printers Printers using using Bubble Jet Canon Direct Direct Print { { 1 image { – Multiple {*1 – ID Photo { – Card #1, Card #2, Card #3, Letter (LTR) or A4 –*2 { Bordered { { Borderless { { { { Trimming { { Movies (Movie Print)
MEMO 74
MEMO 75
MEMO 76
MEMO 77
MEMO 78
