PowerShot S95 Camera User Guide

Checking the Focus
126
You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the l button to switch to
the focus check display (p. 44).
X A white frame will appear where the AF
frame or face was when the focus was set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Switch frames.
● Move the zoom lever toward k once.
X The screen shown to the left will appear.
● Press the m button to move to a different
frame when multiple frames appear.
Change the magnification level or
location.
● Use the zoom lever to change the display
size, and the opqr buttons to change the
display position while checking the focus.
● Pressing the n button resets the
display to Step 1.
• If you press the qr buttons or turn the Ê dial during playback, the image
will switch. If you keep the qr buttons pressed, you can fast-forward
through images.
• The power saving function (p. 51) does not work during slideshows.
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
• In single image playback, you can also start a slideshow by pressing and
holding the m button and immediately pressing the button.
Checking the Focus
COPY