PowerShot S3 IS Camera User Guide Advanced

Using the Mode Dial
55
2 Aim the camera so that the color you wish to change
appears at the center of the LCD monitor (or
viewfinder) and press the
W
button.
z Only one color can be specified.
z You can use the
S or T button to specify the range of the colors
that are retained.
-5: Only takes the color that you want to change.
+5: Also takes colors close to the one that you want to change.
3 Aim the camera so that the desired color appears at
the center of the LCD monitor (or viewfinder) and
press the
X
button.
z Only one color can be specified.
4 Complete the setting with the SET button, and shoot.
z This completes the setting.
z When you press the Movie button, you can shoot movies in
Color Swap mode.
z The default setting for Color Swap changes green into white.
z You may not obtain the expected results after color input
mode if you use the flash.
z The colors specified in the Color Swap mode are retained
even if the camera's power is turned off.