Software Starter Guide

9
Windows
PUSH Button
1. Attach the supplied USB cable to a USB port directly on the computer
and to the DIGITAL terminal of the PowerShot S10/S20 as shown below.
• There is no need to turn the camera or computer power off when attaching or
detaching the USB cables.
• Please consult your computer’s manual for the location of the USB ports.
• The camera can be connected to any USB port on computers that feature more
than one.
2. Install the USB driver and the PowerShot USB TWAIN Driver (First connec-
tion only). (➔ pp. 10-12)
USB Port
USB Cable
DIGITAL Terminal
1. Open the DIGITAL
terminal cover by slipping
a fingernail under the top
edge and pulling down.
2. Insert the cable so that the
marks on
the cable and camera align.
Always press the [PUSH] button on the connector to
detach the cable from the camera’s DIGITAL terminal.
USB Cable
Precaution for Unplugging Cables from the
DIGITAL Terminal