Software Guide for Macintosh

Things to
Remember
Mastering
the Basics
More Advanced
Techniques
Appendices
9
Table of Contents
Transferring Images
Transferring Images by Connecting the Camera to a Computer
Transferthecameraimagestothecomputer.
IMPORTANT
• The instructions in this software manual assume that you have correctly installed
the software. See the
Camera User Guide for software installation procedures.
• For details on how to connect the camera to a computer, refer to the Camera
User Guide . Please also refer to “Precautions for Connecting the Camera to the
Computer”.
• If CameraWindow fails to open when you connect the camera, click the
[CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
1
Connect the camera to the computer with
the supplied interface cable.
2
Turn on the camera power, set it to
playback mode and prepare it to
communicate with the computer.
3
Click [Import Images from
Camera] and then click [Import
Untransferred Images].
Onlyimagesthathavenotyetbeen
transferredwillstarttotransfer.
Ifyouusetheloggerfunctionona
cameraequipedwithaninternalGPS
function,theGPSlogfileswillalso
transfer.
CameraWindow (Menu Screen)
COPY