Software Starter Guide

Serial Interface

Select the port and baud rate settings, and click the [Set] button.

• Select the port to which the camera is attached.

• There is usually no need to change the baud rate setting from 115.2 K, but

if you are having trouble with the connection, try a slower baud rate.

What to Do if the [PowerShot Browser not found] Dialog Appears

If you install only the PowerShot Plug-

In Module without PowerShot

Browser, the [PowerShot Browser not

found] dialog may display. If this

happens, use the following procedures to prevent PowerShot Browser from

attempting to start automatically.

1) Click the [OK] button on the [PowerShot Browser not found] dialog.

2) In the [Settings for USB connection] dialog, click the [The application program

below will start.] option to clear the check mark.

3) Close the [Settings for USB connection] dialog.

This will prevent the [PowerShot Browser not found] dialog from appearing again

when the camera is connected.

* The [Settings for USB connection] dialog can also be opened by choosing the

(Apple) menu and selecting [Control Panels] and [Canon USB Camera]. (➔ p. 46)

Click here to close the dialog.

Click here to clear the check mark.