Software Starter Guide

15
Windows
Starting ZoomBrowser EX
1.
Open a connection between the camera and computer.
• Connecting to a USB Port (➔ p. 8)
• Connecting to a Serial Port (➔ p. 13)
• Connecting via a CF Card Reader or PC Card Slot (➔ p. 14)
2.
Turn the camera’s mode dial to the position.
3. Start ZoomBrowser EX.
• Double-click the [Canon PowerShot] icon on the desktop.
• If the [Canon PowerShot] icon does not appear on the
desktop, click the Windows [Start] button and select
[Programs], [Canon PowerShot Utilities], [ZoomBrowser
EX] and [ZoomBrowser EX].
Quick Tips will automatically display. Read these tips to
quickly understand operating procedures.
4. Use one of the three interfaces to display the camera window.
USB Interface
The [PowerShot S10 Event] or [PowerShot
S20 Event] dialog will appear so that you
can select an application to start when you
connect the camera to a USB port. Select
ZoomBrowser EX and click the [OK] button.
ZoomBrowser EX will start and thumbnail
images will display in the camera window.
(➔ p. 17)
From Loading to Printing
This section provides a simple explanation of the procedures for using ZoomBrowser EX to
load and print images. Please refer to the ZoomBrowser EX Help file for more details.
Auto Save and Batteries
When the camera is connected to a computer and powered by a 2CR5 lithium
battery or Battery Pack NB-5H, a message will ask if you wish to remain connected
after approximately five minutes without a camera control being accessed. If you
select [No], the camera will shut down after approximately one minute (PC icon
disappears from the display panel). You can restore the connection by pressing
the shutter button (PC icon displays in the display panel).
Canon PowerShot Icon