PowerShot Pro70 Software Guide

Loading Images onto a Macintosh Computers

Now that you have finished installing the required software, connect the

camera to the computer and try your hand at uploading images. Use the IFC-

100MC interface cable to connect the camera to your Macintosh.

• When connecting these devices, always ensure that the computer is shut off and

the camera’s mode dial is set to lock.

• Since transferring files between the computer and the camera is relatively power-

intensive, it is advisable to power the camera with an AC power source.

1. Turn off the computer and set the camera’s mode dial to lock.

2. Open the camera’s terminal cover and connect the IFC-100MC

interface cable to the digital terminal.

3. Connect the other end of the cable to the computer’s modem port or

printer port.

Connecting the Camera and Computer

IFC-100MC

Interface Cable

IFC-100MC

Interface Cable

Mode Dial

Digital Terminal

Printer Port Modem Port

Connect the interface

cable to the printer or

modem port.

Terminal Cover