PowerShot Pro70 Software Guide

10
Loading Images onto a Windows Computers
Installing the Software
Installing the software contained on the PowerShot Solution CD-ROM is the first procedure
to complete before you can start loading images onto your computer.
Computer System Requirements
Your computer system must satisfy the following requirements to operate the
bundled software.
Operating System: Windows 95, Windows 98 or Windows NT 4.0
CPU: 486DX2/66 MHz or higher (Pentium recommended)
RAM: 24 MB or more (32 MB or more recommended)
32 MB or more recommended for Windows NT
Free Disk Space: TWAIN Driver 2.3: 15 MB or more
ZoomBrowser 1.1: 30 MB or more
SlideShow Maker 1.2: 20 MB or more
TimeTunnel 2.3: 30MB or more
PhotoStitch 2.2: 40 MB or more
PhotoImpact 4.0: 130 MB or more
Ports: Standard RS-232C interface (PowerShot Pro70)
D-SUB 9-PIN connector
Monitor: 640 x 480 pixels, 256 colors or more
(1,024 x 768 pixels, 32,000 colors or more recommended)
Sound Card: Required to play sound annotations
• CD-ROM Drive is required for software installation.
• QuickTime Version 3.0 or later is required to save PhotoStitch images in
QuickTime VR format.
Installation Procedures
The following programs can be installed from the PowerShot Solution CD-ROM.
• TWAIN Driver 2.3
Install this program if you intend to use PhotoImpact, ZoomBrowser or
other TWAIN-compliant application programs to load images from the
camera.
• Slide Show Maker 1.2
• TimeTunnel 2.3