PowerShot Pro1 Quick Start Guide

6
Preparing to Download Images to a Computer
b.
Click the Digital Camera Software [Install] button and click [Next].
B.
Install the Software.
a.
Place the Canon Digital Camera Solution Disk in the computer’s
CD-ROM drive.
c.
Select [Easy Installation] and click [Next].
Proceed with the installation while reviewing installation settings.
d.
When the installation is over, select [Yes, I want to restart my
computer now.] in the screen below and click [Finish].
C.
Connect the camera to the computer.
a.
Connect the supplied interface cable to the computer’s USB
port and the camera’s DIGITAL terminal.
➜
Software Starter Guide
To the DIGITAL terminal
■ Windows XP
After a few moments, the dialog box
shown to the right will appear and the
USB driver provided with your Windows
OS will automatically be installed.
■ Windows 2000 / Windows Me / Windows 98
After a few moments, the Add New Hardware Wizard will appear and
automatically install the USB driver.
Once [Communication Settings]
appears, click the [Set] button.
Once connected, the camera and the computer will be able to
automatically communicate.
The name of your
camera model or
[Canon Camera] and
the USB port
number (e.g. @1)
will appear here.
USB port
Interface
cable
Terminal cover
1. Open the terminal cover
with your fingernail.
2. Hold the USB connector so
the [
] side is up, then
insert it into the DIGITAL
terminal securely.
Explorer View
• With Mac OS X, double-click the CD-ROM icon,
followed by the [Mac OS X] and [Canon Digital
Camera Installer] (
) icons.
• With Mac OS 9, double-click the CD-ROM icon,
followed by the [Mac OS 9] and [Canon Digital
Camera Installer] (
) icons.
Once the installation is
complete, click [Quit].
Never connect the camera to the computer before the
software is installed.
List of Things to Prepare
● Camera and computer
● Canon Digital Camera Solution Disk provided with the camera
● Interface cable (use the cable provided with the camera)
A.
Computer system requirements
■ Windows
OS Windows 98 (First or Second Edition)
Windows Me
Windows 2000
Windows XP (Home Edition, Professional)
Computer Model The above OS should be pre-installed on
computers with built-in USB ports.
CPU Windows 98/Windows Me/Windows 2000:
Pentium 150 MHz or higher processor
Windows XP:
Pentium 300 MHz or higher processor
For all of the above OSs:
Pentium 500 MHz or higher processor is
recommended (for editing movie).
RAM Windows 98/Windows Me/Windows 2000:
64 MB or more
Windows XP:
128 MB or more
For all of the above OSs:
128 MB or more is recommended
(for editing movie).
Interface USB
Free Hard Disk Space ● Canon Utilities
- ZoomBrowser EX: 200 MB or more
(Including the PhotoRecord printing program)
- PhotoStitch: 40 MB or more
● Canon Camera TWAIN Driver: 25 MB or more
● Canon Camera WIA Driver: 25 MB or more
Display 800 x 600 pixels/High Color (16 bit) or better is
required.
1,024 x 768 pixels or better is recommended.
■ Macintosh
OS Mac OS 9.0 – 9.2, Mac OS X (v10.1/v10.2)
Computer Model The above OS should be pre-installed on
computers with built-in USB ports.
CPU PowerPC
RAM Mac OS 9.0 – 9.2:
64 MB or more of application memory
Mac OS X
(v10.1/v10.2) : 128 MB or more
Interface USB
Free Hard Disk Space ● Canon Utilities
- ImageBrowser: 120 MB or more
- PhotoStitch: 30 MB or more
Display 800 x 600 pixels/32,000 colors or better is
required.
1,024 x 768 pixels or better is recommended.
All procedures performed with a connection to a USB 2.0
compliant board are not guaranteed.
■ Mac OS 9
a. Confirm that [Display
Images] is selected and click
the [OK] button.
■ Mac OS X
a. If iPhoto or Image Capture
are running, click on
in
the upper left corner of the
window to close the
application.
b. Double-click the [Canon
ImageBrowser] icon on the
desktop.
c. Click [Canon Camera] in
the Explorer View section.
e.
Remove the disk from the CD-ROM drive after restarting.