Quick Start Guide

4
Initial Preparations
2 Insert the battery pack.
 Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
 If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always conrm that the
battery pack is facing the right way and
locks when inserted.
3 Close the cover.
 Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
4 Connect the compact power
adapter.
 With the camera turned off, open the
cover (1). With the smaller plug of the
accompanying interface cable (=
2)
in the orientation shown, insert the plug
fully into the camera terminal (2).
 Insert the larger plug of the interface
cable into the accompanying compact
power adapter.
5 Charge the battery pack.
 Plug the power cord into the compact
power adapter, then plug the other end
into a power outlet.