Getting Started ENGLISH CEL-SV5GA210
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera Battery Pack NB-9L*1 Compact power adapter CA-DC30E Interface Cable IFC-400PCU Wrist Strap*2 *1 Do not peel off the label attached to the battery as an exterior part. *2 For attachment instructions, refer to the Camera User Guide that can be downloaded from the Canon website. • Printed matter is also included. • A memory card is not included.
Manuals and Software You can download manuals and software from the following URL. http://www.canon.com/icpd/ • With a computer connected to the Internet, access the above URL. • Access the site for your country or region. • Adobe Reader is required to view the manuals. • You can also download software from the website. For instructions on downloading and installing the software, refer to the Camera User Guide available for download.
Initial Preparations 2 Insert the battery pack. zz Holding the battery pack with the terminals (1) facing as shown, press the battery lock (2) in the direction of the arrow and insert the battery pack until the lock clicks shut. zz If you insert the battery pack facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted. 3 Close the cover.
Initial Preparations zz Battery charging begins, and the USB charge lamp is lit. zz When charging is finished, the lamp is turned off. zz Remove the compact power adapter from the power outlet and the interface cable from the camera. Inserting Your Memory Card 1 Open the cover. zz Open the monitor (1). zz Slide the cover (2) and open it (3). 2 Insert the memory card. zz Insert the memory card facing as shown until it clicks into place.
Initial Preparations 2 Set the date and time. zz Touch the option to configure, and then touch [o][p] to specify the date and time. zz When finished, touch [^]. 3 Specify your home time zone. zz Touch [q][r] to choose your home time zone. zz Touch [OK] when finished. After a confirmation message, the setting screen is no longer displayed. zz To turn off the camera, press the ON/OFF button. Changing the Date and Time To adjust the date and time once you have set it, do the following.
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on and enter [ mode. ] zz Press the ON/OFF button. zz Set the mode switch to [4]. zz Touch [ ], touch [o][p] or drag up or down on the screen, and then touch ] to choose it. [ zz To confirm your choice, touch [OK]. 2 Compose the shot. zz If the zoom ring is turned in the direction of [i], the subject gets larger.
Trying the Camera Out Viewing 1 Enter Playback mode. zz Press the [1] button. 2 Browse through your images. zz To view the previous or next image, drag left to right or right to left. zz Movies are identified by a [ play movies, go to step 3. ] icon. To 3 Play movies. zz Touch [ ] to start playback. zz To adjust the volume, drag up or down across the screen during playback. ] is displayed. zz After the movie is finished, [ Erasing Images To erase the image you chose in step 2, do the following.
PC2181 © CANON INC.
