Getting Started ENGLISH CEL-SW2NA210
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera Battery Pack NB-13L* Battery Charger CB-2LHE Wrist Strap * Do not peel off the adhesive covering from a battery pack. ● Printed matter is also included. ● A memory card is not included. Compatible Memory Cards No memory card is included. Purchase one of the following kinds of card as needed. These memory cards can be used, regardless of capacity.
Manuals and Software You can download the manuals and software from the following URL. http://www.canon.com/icpd/ ● With a computer connected to the Internet, access the above URL. ● Access the site for your country or region. ● Adobe Reader is required to view the manuals. ● For instructions on downloading and installing the software, refer to the Camera User Guide available for download. ● You may be requested to enter the serial number (body number) when downloading the manuals or software.
Initial Preparations 3 Charge the battery pack. Plug the power cord into the charger, then plug the other end into a power outlet. The charging lamp turns orange, and charging begins. When charging is finished, the lamp turns green. Remove the battery pack. For details on charging time and the number of shots or recording time available with a fully charged battery pack, refer to “Specifications” in the downloadable Camera User Guide. 4 Open the cover.
Initial Preparations (1) (2) 6 Recording is not possible on memory cards with a write-protect switch when the switch is in the locked position. Move the switch toward (1). Insert the memory card with the label (2) facing as shown until it clicks into place. To remove the memory card, push it in until you feel a click, and then slowly release it. 7 (2) Check your card’s write-protect switch and insert the memory card. Close the cover.
Initial Preparations 10 Specify your home time zone. Touch [ ][ ] to choose your home time zone. Press the [ ] button when finished. After a confirmation message, the setting screen is no longer displayed. To turn off the camera, press the ON/OFF button. 11 Configure the display language. Press the [ ] button. Press and hold the [ ] button, and then immediately press the [ ] button. Touch a display language to choose it, and then press the [ ] button.
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on and enter [ ] mode. Press the ON/OFF button. Set the mode dial to [ ]. 2 Compose the shot. To zoom in and enlarge the subject, move the zoom lever toward [ ] (telephoto) as you watch the screen, and to zoom away from the subject, move it toward [ ] (wide angle). 3 Shoot.
Trying the Camera Out Recording Movies Press the movie button to start recording, and press it again to stop. Viewing 1 Enter Playback mode. Press the [ 2 ] button. Choose images. To view the previous or next image, drag left to right or right to left. ] icon. Movies are identified by a [ To play movies, go to step 3. 3 Play movies. Touch [ ] to start playback. To adjust the volume, drag up or down across the screen during playback. After the movie is finished, [ ] is displayed.
Trademarks and Licensing ● Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. ● Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. ● App Store, iPhone, and iPad are trademarks of Apple Inc. ● The SDXC logo is a trademark of SD-3C, LLC. ● HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
© CANON INC.