Software Starter Guide DC SD Ver.8

17
PowerShot S40/S30
Other Cameras
Please refer to the Camera User Guide bundled with your camera.
3.
Prepare the camera for communication with the computer.
Turn the camera’s mode dial, main dial or mode switch to .
PowerShot S40/S30
As soon as the camera is attached, it will automatically power up and
begin connecting. To shoot with RemoteCapture, ensure that you open
the camera’s lens cover.
With Windows, the driver software will install the first time (only) you
connect via the USB interface.
Precautions for Detaching the Cable
• Always hold down the Push button on the cable
or hold the connector by its sides when you
detach it from the camera’s Digital Terminal.
USB Cable
Camera End Computer End
Digital Terminal
on the Camera
USB Port on
the Computer
Insert the connector so
that the symbol
faces the camera’s rear.
Example: PowerShot G2
PUSH Button