PowerShot G2 Camera User Guide

4 Printing with the Direct Print Compatible Bubble Jet Printer (Optional)
Printing
An image can be printed when displayed in single replay or selected in index replay.
1
Choose an image using
or on the
omni selector and press the
button.
2
Set the number of prints, the print style
and cropping settings as required.
• Selecting the number of copies
(Additional Information p. 5)
• Setting the Print Style
(Additional Information p. 5)
• Trimming (Printing a Portion of an image)
(Additional Information p. 7)
3
Choose [Print] using , , or on
the omni selector and press the
button.
• You can also select [Print] by pressing the
button.
• The image starts printing and, when it is
completely finished, the display reverts to
standard replay mode.
• You cannot print movies or images recorded in the RAW format.
Cancel Printing
• To cancel printing between images, press the button. A confirmation dialog
appears. Select [OK] using
or
on the omni selector and press the button.
The printing stops even if it is incomplete and the paper is fed through.
Printing Errors
• An error message will appear if an error occurs for some reason during the printing
process (Additional Information p. 11). The printing resumes automatically after you
correct the error. If the error persists, press the
button and stop printing.
• The [Continue] and [Stop] options may appear with some error messages.
• The error number is displayed on the operation panel of Bubble Jet Printer. Please
refer to the Bubble Jet Printer Quick Start Guide for the remedies corresponding to
the error numbers.