Software Starter Guide DC SD Ver.2.0

53
Windows
Converting RAW Images with Quality Adjustment
1. Select a RAW image from the Thumbnail Display Area of the TWAIN
Driver window.
2. Click the TWAIN Driver [Set RAW Param.] button.
The RAW Image Parameter Settings dialog will display.
3. Select the quality settings and click [OK].
When an image is adjusted, the “RAW” symbol shown on its thumbnail will change
from gray to green. If multiple RAW images are selected, the parameters are applied
only to the first image. When only one RAW image is adjusted, the changes are also
reflected in the remaining images in the selection.
4. Click the [Acquire] button.
The RAW image will be converted according to the specified parameters and the
data will be sent to Adobe Photoshop LE at 8 bits per RGB channel.
To learn how to change the file transmission format, please see “How to Change
the File Transmission Format” on the next page.
• The image quality settings return to the default settings when the TWAIN Driver is
closed. The settings will also be reset to the defaults if the connection to the
camera is broken, or if the TWAIN Driver window is refreshed as a result of an
image being shot or deleted with the camera while it is connected.