Software Starter Guide DC SD Ver.2.0

105
Windows
Macintosh
Converting RAW Images with Quality Adjustment
1. Select a RAW image.
Select a RAW image from the Thumbnail Display Area of the Plug-In Module.
2. Click the Plug-In Module [RAW] button.
The RAW Image Parameter Settings dialog will display.
3. Select the quality settings and click [OK].
When an image is adjusted, the “RAW” symbol shown on its thumbnail will change
from white to green. If multiple RAW images are selected, the parameters are
applied only to the first image. When only one RAW image is adjusted, the changes
are also reflected in the remaining images in the selection.
4. Click the [Acquire] button.
The RAW image will be converted according to the specified parameters and the
data will be sent to Adobe Photoshop LE or Adobe PhotoDeluxe at 8 bits per RGB
channel.
To learn how to change the file transmission format, please see “How to Change
the File Transmission Format” on the next page.
• The image quality settings return to the default settings when the Plug-In Module
is closed. The settings will also be reset to the defaults if the connection to the
camera is broken, or if the Plug-In Module window is refreshed as a result of an
image being shot or deleted with the camera while it is connected.