Camera User Guide Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software This Guide Connecting the Camera to a Computer Software Starter Guide Downloading Images to a Computer Please start by reading the Precaution on the reverse side of this cover.
Precaution Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
Table of Contents Read this First ............................................................................. 4 Quick Start .................................................................................. 8 Components Guide ................................................................... 10 Front View ................................................................................... 10 Back View .................................................................................... 11 Controls ........
Stitch Assist Mode ................................................................ 46 Movie Mode ........................................................................ 49 Macro Mode ........................................................................ 50 Self-Timer ............................................................................ 51 Continuous Mode ................................................................ 52 Digital Zoom ...............................................................
Print Settings (DPOF Settings) .................................................. 95 Selecting Images for Printing ......................................................... 95 Setting the Print Style .................................................................... 98 Resetting Print Settings ............................................................... 100 List of Menu Options .............................................................. 101 Rec. Menu ................................................
Read this First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Warnings • Do not aim the camera directly into the sun or at other intense light sources that could injure your eyesight. • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may injure eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. • Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury.
• Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fire. • Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock. Replace a broken or damaged power adapter cord. • Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock.
• The camera terminal of the supplied compact power cord is designed for exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards. • Exercise due caution when screwing on the separately sold wide converter lens, teleconverter lens, close-up lens and conversion lens adapter. If they loosen, fall off and shatter, the glass shards may cause an injury. Never aim the lenses at the sun or strong light sources. There is a risk of damage to eyesight.
Quick Start 1 Install the Battery (p. 20). 2 Charge the Battery (p. 18). 3 Install the CF card. (p. 26). Slide the battery cover lock, push the battery cover open and insert the battery. Terminals Orange Indicator Confirm that the main dial is turned to . Charge the battery. The battery is approximately 90% charged (adequate charge for use) when the orange indicator beside the viewfinder stops flashing and changes to a steady orange.
the mode dial (upper dial) to 6 Turn (p. 37). 7 Focus (p. 34). Aim the camera and lightly press the shutter button halfway. Two beeps will sound when the autofocus is set. 8 Shoot (p. 34). Press the shutter button all the way. You will hear the sound of the shutter close when the shot is complete. 9 View the recorded image (p. 39). The recorded image will display in the LCD monitor for approximately 2 seconds.
Components Guide Front View Optical Viewfinder Window (p. 38) Remote Sensor (p. 107) AF-Auxiliary Light Emitter Red-Eye Reduction Lamp (p. 41) Self-Timer Lamp (p. 51) Built-In Flash (p. 41) Speaker (Manual Focus) Button (p. 74) Terminal Cover Microphone Lens A/V OUT (Audio / Video Out) Terminal (p. 91) DIGITAL Terminal* (pp.119, 120) DC IN Terminal (p. 18) • To connect the camera to the computer with the USB interface, attach the supplied interface cable to the camera’s DIGITAL terminal.
Back View Viewfinder (p. 38) CF Card Slot Cover (p. 26) Strap Eyelet (p. 28) Battery Cover (p. 18) Battery Cover Lock (p.
Controls Main Dial (p. 13) Hot Shoe (p. 108) Mode Dial (p. 13) Indicators Shutter Button (p. 34) Diopter Adjustment Lever (p. 38) Zoom Lever (p. 40) Display Panel (p. 14) (Continuous) / (Self-Timer / Wireless Controller) Button (pp. 51, 52, 107) LCD Monitor (pp. 15, 32) Omni Selector (Menu) Button (Set) Button (Display) Button (Exposure) / (White Balance) / (AEB) / (Flash Exposure Compensation) Button (pp. 63, 64, 67, 68) (AE Lock) / (FE Lock) Button (p. 69, 70) (Macro) / (Jump) Button (pp.
Main Dial / Mode Dial Main Dial (lower dial) Mode Dial (upper dial) Main Dial Use the main dial to switch between the power off, shooting, replaying and PC connection modes. : : : : Off (p. 29) Shooting (p. 31) Replaying (p. 31) PC Connection (pp. 119, 121) • The (PC connection) mode is used to download and view images on a computer when the camera is connected via the interface cable. Please read Using the Supplied Interface Cables (p. 116) for connection instructions.
Display Panel The display panel shows the camera settings, the remaining image capacity, movie shooting time, battery charge and other information. AE Lock / FE Lock pp. 69, 70 Shutter Speed / Movie Shooting Time - Aperture Setting - Compression p. 54 Resolution p. 54 File Format p. 56 Spot Metering p. 72 Single Shot / Continuous Mode p. 52 Flash On / Flash Off p. 41 Red-Eye Reduction p. 41 Macro Mode p. 50 Flash Exposure Compensation p. 68 Self-Timer / Wireless Controller pp.
LCD Monitor Switching between Modes Pressing the Display button switches the LCD monitor display mode. Shooting • Pressing the Display button cycles the LCD monitor to the next mode each time the button is pressed. The order is on (no information) / on (information view) / off. • The LCD monitor’s display mode [on (no information); on (information view); LCD monitor off] is memorized when the camera is turned off. When the camera is turned on again it assumes the last mode.
Information Displayed on the LCD Monitor The LCD monitor displays information in the shooting or replaying mode, such as the camera settings, remaining image capacity and shooting date / time. Shooting The following displays in information view. Aperture Setting ... MF (Manual Focus) Indicator Shutter Speed (RED) 2x 4x ... Shooting Mode p.
Replaying File Number Image Number Shooting Date / Time and Total In simple display mode, the following information displays. • File Number • Image Number (Displayed Image / Total) • Shooting Date / Time • : Compression Setting • : Resolution Setting • : File Format : Movie • • Protection Status ( ) In the detailed display mode, the following information also displays. ... Aperture Setting Shutter Speed ISO Speed Setting ... Shooting Mode p.
Preparing the Camera Charging the Battery Pack Use the following procedures to charge the battery pack the first time and subsequently when the low battery icon ( ) and Lb ( ) message flash. 1 2 Turn the main dial to . 3 Insert the battery pack and close the battery cover. Slide the battery cover lock in the direction of the arrow and open the battery cover. Terminals Connect to an Elactrical Outlet ... the power cord to the compact 4 Attach power adapter and plug it into an electrical outlet.
• After charging the battery, remove it from the camera if the camera will not be used. • If the main dial is set to any position other than while charging, the battery pack will stop charging and the household electrical current will power the camera. • This is a lithium ion battery pack so there is no need to completely use or discharge it before recharging. It can be charged at any charge state.
Installing the Battery Pack Install Battery Pack BP-511 (supplied) into the camera as follows. Use a household power source to power the camera for extended periods (p. 22). 1 2 Turn the main dial to . Slide the battery cover lock in the direction of the arrow and open the battery cover. 3 Insert the battery pack as shown. 4 Close the battery cover. Terminals • Charge the battery pack before using it the first time (p. 18).
Battery Performance Number of Images Shot LCD Monitor On LCD Monitor Off Battery Pack BP-511 (full charged) Approx. 260 images Approx. 800 images Replay Time Approx. 160 minutes • The data above will vary according to the shooting conditions and settings. • Movie data is excluded. • At low temperatures, the battery pack performance may diminish and the low battery icon appear very rapidly. In these circumstances, the performance can be improved by warming the battery pack in a pocket before use.
Using a Household Power Source You are advised to use a household power source for long periods of use and for connecting to a computer. Connect to an Elactrical Outlet ... 1 Attach the power cord to the compact power adapter and plug it into an electrical outlet. 2 Open the terminal cover and connect the DC plug of the compact power adapter to the camera’s DC IN terminal. Compact Power Adapter CA-560 • Always disconnect and unplug the compact power adapter after use.
Using a Charge Adapter / Car Battery Cable Kit (Optional) Charge Adapter / Car Battery Cable Kit CR-560 (optional) can be used to charge battery packs or to power the camera from a car’s cigarette lighter socket. You can also charge a battery pack from a household power source without using the camera by connecting Compact Power Adapter CA-560 (supplied with the camera) to Charge Adapter / Car Battery Cable Kit CR-560.
Charging the Battery Pack To a Car’s Cigarette Lighter Socket 1 Attach the car battery cable to the charge adapter. 2 With the engine running, plug the car battery cable into the cigarette lighter socket. 3 Attach the battery pack. • Align the battery pack with the ▲ mark on the charge adapter and slide it in the direction of the arrow. • Up to two Battery Pack BP-511s can be placed in the charge adapter simultaneously. • Either slot, A or B, can be used to charge a single battery pack.
5 With the engine running, unplug the car battery cable from the socket. • Whenever you turn the engine off, the battery will stop charging, so be sure to unplug the charge adapter from the cigarette lighter socket. • Wait until the engine is running again to plug it back into the cigarette lighter socket and resume charging.
Installing a CF Card CF Card Eject Button 1 2 Turn the main dial is set to . 3 Insert the CF card with the label facing up and the arrow pointing in. Slide the CF card cover in the direction of the arrow and lift it open. • Push the card in until the CF card eject button fully extends. • To remove the CF card, push the CF card eject button and pull the card out.
• When the camera’s indicator flashes green, the camera is writing, reading, erasing or transmitting an image to or from the card. Do not perform the following, for image data may be lost or corrupted: - Do not apply shocks or vibrations to the camera. - Do not turn off the power or open the battery cover. - Do not open the CF card slot cover or remove the CF card. • Never open the CF card slot cover when the power is on.
Attaching the Strap Slip the small loop of the strap through the strap eyelet on the camera and through the hand loop. • Avoid waving the camera about or catching it on other items when suspending it from the strap. Attaching the Lens Cap Fit the lens cap over the lens casing so that it covers the entire lens. Always replace the lens cap after use. • Attach the lens cap cord to the strap or strap eyelet. • Remove the lens cap before turning on the camera power.
Basic Functions Turning the Power On / Off 1 Turn the main dial left or right from the position. • The power is off when in the on in any other. position and Example of the main dial turned to (Shooting). • will appear in the display panel and a warning beep will sound if you turn on the camera with the lens cap on. If this occurs, remove the lens cap and turn the camera off and back on. • Be careful not to touch the lens when shooting.
Setting the Date / Time 1 2 3 (Rec.) Menu. Turn the main dial to or . • The camera will power up. Press the Menu button. • The [ (Rec.)] or [ (Play)] menu will display. Press the arrow on the omni selector to select the [ (Set up)] menu. • Pressing the Jump button also switches between menus. the or arrow on the omni 4 Press selector to select [Date/Time], then press the Set button. • The factory default for the date format may differ from that shown here in some regions.
Switching between Shooting and Replaying Shooting • Turn the main dial to . Replaying • Open the LCD monitor and turn the main dial to . If you switch rapidly to replay mode directly from shooting mode, the lens may not retract. This is convenient when you wish to shoot again after checking or deleting an image immediately after it is shot. • Be careful not to touch the lens while in replay mode.
Using the LCD Monitor The LCD monitor can be used to confirm an image during shooting, to replay recorded images or to adjust menu settings. It can be opened to the following range of positions. • Opened left to right 180 degrees. It locks temporarily at 90 degrees. • Tilted forward 180 degrees toward the lens or backward 90 degrees. • The LCD monitor will automatically turn off when it clicks shut against the camera body. For protection, always close the LCD monitor after use.
The LCD monitor can also be positioned as below. 1 2 Open the LCD monitor left 180 degrees and tilt it 180 degrees toward the lens. • In this position, icons and messages do not appear on the LCD monitor. • The image shown on the LCD monitor is automatically flipped and reversed so that it appears correctly from in front of the lens. Fold the LCD monitor back against the camera body. • Fold it until it clicks into place against the camera body.
Pressing the Shutter Button The shutter button features a two-stage action. Pressing Halfway • Pressing halfway automatically sets the exposure, focus and white balance. When metering is complete, two beeps sound and the indicator shines green. When the flash is on, the indicator shines orange. If the indicator is flashing orange, it warns of possible camera shake or low light. In macro or manual focus mode, the yellow indicator will also shine.
Selecting Menus and Settings Menus are used to adjust shooting, replaying, date / time and electronic sound settings. Watch the LCD monitor while performing the following procedures. 1 2 3 Press the Menu button. • In In mode, the [ mode, the [ (Rec.)] menu will appear. (Play)] menu will appear. Press the or arrow on the omni selector to switch between menu tabs. • Pressing the arrow displays the [ (Set up)] arrow displays either the menu, while the [ (Rec.)] or [ (Play)] menu.
Menu Settings and Factory Defaults This chart shows the options for each menu and the default settings. Menu Item Resolution Compression Rec. Menu (Red) Play Menu (Blue) Set up Menu (Yellow) Reference Page Available Settings (2048 x 1536*) / (Superfine) / (1024 x 768) / (Fine*) / (640 x 480) (Normal) p. 54 p. 54 File Format JPEG* / RAW p. 56 ISO Speed 50* / 100 / 200 / 400 / AUTO p. 77 Digital Zoom Off* / 2x / 4x p. 53 AF Mode Continuous* / Single p. 76 Review Off / 2 sec.*/ 10 sec.
Shooting - Letting the Camera Select Settings Auto Mode In this mode, all you have to do is press the shutter button and let the camera do everything else. 1 2 3 Turn the mode dial to . Aim the camera at the subject. Operate the zoom lever to achieve the desired composition (relative subject size in the viewfinder). 4 Press the shutter button halfway (p. 34). • The camera will focus on the subject and beep twice when complete.
• You can change the following settings. - Resolution: Large* / Medium / Small - Compression: Superfine / Fine* / Normal - Digital Zoom: Off* / On - AF Mode: Continuous* / Single - Review: 2 sec* / 10 sec. / Off - File No. Reset: Off* / On - Flash: Red-Eye Reduction Auto* / Auto / Off - Drive Method: Single* / Self-Timer - Macro: Off* / On * Default settings • With the Review function, you can change the length of time images show in the LCD monitor after shooting, or set it so they do not show at all (p.
Checking an Image Right after Shooting Checking the Image The following explains ways to view the photographed image in addition to viewing it for 2 seconds in the LCD monitor when it has been opened. Keeping the Shutter Button Pressed The image will continue to display in the LCD monitor as long as you keep the shutter button fully depressed.
Adjusting the Zoom (Focal Length) Focal length can be adjusted from 7 to 21 mm (equivalent to 34 to 102 mm in 35 mm film format). Telephoto / Wide Angle • Press the zoom lever toward (telephoto). • Press the zoom lever toward (wide angle). to zoom in to zoom out Digital Zoom • An image already zoomed with the optical zoom lens can be further zoomed digitally by 2 or 4 times (p. 53) and shot. • The digital zoom combines the optical zoom with a digital teleconverter function.
Using the Built-In Flash Use the built-in flash according to the guidelines below. (Auto)* The flash fires automatically as required by the lighting level. (Red-eye reduction, Auto) The red-eye reduction lamp always fires but the flash only fires as required by the lighting level. (Red-eye reduction, Flash on) (Flash on) (Flash off) The red-eye reduction lamp and the flash always fire. The flash always fires. The flash does not fire. * No icon appears in the display panel in Auto mode.
• The fastest shutter speed for flash synchronization is 1/250 second. The camera automatically resets the shutter speed to 1/250 second if a faster speed is selected. • The flash may take up to approximately 10 seconds to charge in some cases. Actual times will vary according to usage and the battery charge. • The flash will fire at full strength in mode. , , , , , , , • The flash will automatically adjust its output in the , and modes.
Pan Focus Mode This mode fixes the focus so that shot can be taken quickly when the shutter button is pressed. Use this mode when you do not want to miss a shot, but you cannot predetermine the subject’s position or focal distance. The focal length is preset to the maximum wide angle setting. 1 Turn the mode dial to . • Shooting procedures are the same as for the Auto mode (p. 37). .
Landscape Mode Use this mode to shoot expansive landscape scenes. 1 Turn the mode dial to . • Shooting procedures are the same as for the Auto mode (p. 37). • The macro, AE lock, FE Lock, metering method, file format (RAW), and image adjustment (ISO speed, contrast, sharpness and saturation) settings cannot be adjusted in this mode. • Since a slow shutter speed is often selected in mode, use a tripod to shoot if (camera shake warning) icon appears in the LCD monitor.
Black and White Mode This mode is effective for shooting text or producing images with a nostalgic feel to them. 1 Turn the mode dial to . • Shooting procedures are the same as for the Auto mode (p. 37). • The white balance, AEB mode, AE lock, FE Lock, metering method, file format (RAW), and image adjustment (ISO speed, contrast, sharpness and saturation) settings cannot be adjusted in this mode.
Stitch Assist Mode Use this mode to shoot series of overlapping frames for merging into a large image on the computer. Horizontal Vertical 2x2 • Please use the bundled PhotoStitch program to merge the images on a computer. Framing a Subject PhotoStitch detects the overlapping portions of adjoining images and merges them. When composing shots, try to include a distinctive item (landmark, etc.) in the overlapping portions.
• Compose each frame so that it overlaps 30 to 50% of the adjoining image. Try to keep the vertical misalignment to within 10% of the image height. • Do not include moving items in the overlap. • Do not try to stitch images that include both distant and close items. Objects may appear warped or doubled up. To Shoot a Distant Subject As shown below, swivel the camera around its axis to take successive shots.
2 Select the shooting sequence with the or arrow of the omni selector and press the Set button. • You can also press the shutter button directly to shoot without pressing the Set button. 3 Shoot the first image. • The exposure and white balance settings are set and locked with the first image. and shoot the second image 4 Compose so that it overlaps the first. • Minor discrepancies in the overlap can be corrected with the software. or • An image can be retaken.
Movie Mode Use this mode to shoot movie frames. The resolution is automatically fixed at 320 x 240 pixels. 1 2 3 Turn the mode dial to LCD monitor. and open the • The LCD monitor will turn on. Press the shutter button all the way. • Shooting and sound recording will start simultaneously. • During the shooting, the elapsed time will show in the display panel and a red circle will appear in the upper right of the LCD monitor. Press the shutter button all the way to stop recording the movie.
Macro Mode Use the macro mode to shoot close-ups of subjects in the range of 6 to 70 cm (2.4 in. to 2.3 ft.) at maximum wide angle and 20 to 70 cm (7.9 in. to 2.3 ft.) at maximum telephoto. 1 2 Press the button. • The icon will show in the display panel. It will also show in the LCD monitor when it is on. • Press the button again to cancel the macro mode. Shoot the image. • The indicator beside the viewfinder will shine yellow when the shutter button is pressed halfway.
Self-Timer You can take pictures with the self-timer in any shooting mode. 1 2 Press the button. • Press the button several times to display the icon in the display panel. The icon will also appear in the LCD monitor if it is on. • You can cancel the self-timer by pressing the button until the icon disappears. Shoot the image. • When the shutter button is pressed all the way, the self-timer lamp flashes and activates the shutter approximately 10 seconds later.
Continuous Mode Use this mode to shoot successive frames while the shutter button is pressed. 1 Press the button. • Press the button several times to display the icon in the display panel. The icon will also appear in the LCD monitor if it is on. • You can cancel the continuous mode by button until the icon pressing the disappears. 2 Press the shutter button halfway to lock the focus. 3 Press the shutter button all the way to shoot.
Digital Zoom Images can be digitally zoomed by a factor of 2 or 4 with the digital teleconverter function. 1 2 3 Press the Display button to turn the LCD monitor on. Turn the mode dial to any shooting mode except for or . In the [ Zoom]. (Rec.)] menu, select [Digital • See Selecting Menus and Settings (p. 35). [2x] or [4x] and press the Menu 4 Select button. • The LCD monitor changes to the selected zoom setting. 5 Shoot the image. • Shooting procedures are the same as for the Auto mode (p. 37).
Shooting - Selecting Particular Effects Changing the Resolution and Compression Images can be shot at the following resolution and compression settings. Resolution (Large) (Medium) (Small) Compression 2048 x 1536 pixels 1024 x 768 pixels 640 x 480 pixels Superfine Fine Normal Turn the mode dial to a shooting mode other than . 1 2 In the [ (Rec.)] menu, select [Resolution] or [Compression]. 3 Select a resolution or compression setting and press the Menu button. • See Selecting Menus and Settings (p.
Approximate File Size for One Image Compression Resolution RAW (2048 x 1536) 1722 KB 943 KB 468 KB (1024 x 768) 591 KB 329 KB 174 KB (640 x 480) 273 KB 156 KB 88 KB (2048 x 1536) 2469 KB • This figure reflects standard shooting conditions established by Canon. Actual figures may vary according to the subject and shooting conditions. • Please see the list of CF cards and their approximate capacities (p. 26). • The settings cannot be adjusted in mode.
Changing the File Format The recording file format can be switched to the RAW format. With the standard JPEG file format, the camera processes images after capturing them to produce optimal results. This format compresses images so that more can be stored on a single CF card. However, the compression is irreversible, meaning that the original image data cannot be recovered after processing. In contrast, the RAW format records the image data as captured by the camera’s CCD without further processing.
Program AE Use the program AE mode to have the camera automatically set the shutter speed and aperture settings to match the brightness of the scene. 1 Turn the mode dial to . 2 Press the shutter button halfway to set the focus. 3 • The shutter speed and aperture settings will be set automatically and shown in the display panel. They will also appear in the LCD monitor if it is on. • The correct exposure has been set if the shutter speed and aperture settings do not blink in the display panel.
Setting the Shutter Speed When you set the shutter speed in the shutter speed-priority AE mode, the camera automatically selects an aperture setting to match the brightness. Faster shutter speeds allow you to catch an instantaneous image of a moving subject while slower speeds create a flowing effect. 1 Turn the mode dial to . 2 Press the or arrow on the omni selector to select a speed. 3 Press the shutter button halfway to set the focus. • The shutter speed will show in the display panel.
• If the aperture value is flashing or shown in red, the image is under- or overexposed (insufficient light). Adjust the shutter speed using the or arrow on the omni selector until the flashing stops or the aperture value display turns to white. • The nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.
Setting the Aperture When you set the aperture in the aperture-priority AE mode, the camera automatically selects a shutter speed to match the brightness. Selecting a lower aperture value (opening the aperture) allows you to fade the background and create a beautiful portrait. A higher aperture value (closing it) brings the entire range from foreground to background into focus. The larger the aperture value, the greater the range of the image brought into clear focus. 1 Turn the mode dial to .
• If the shutter speed is flashing or shown in red, the image is under- or overexposed (insufficient light). Adjust the aperture value using the or arrow on the omni selector until the flashing stops or the shutter speed display turnes to white. Aperture Setting Display The larger the aperture value, the smaller the lens aperture. F2.0 F6.3 F2.2 F7.1 F2.5 F8.0 F2.8 F3.2 F3.5 F4.0 F4.5 F5.0 F5.6 The display of aperture settings differs between the display panel and LCD monitor. Aperture Value F2.
Manually Setting the Shutter Speed and Aperture You can manually set the shutter speed and aperture to achieve a particular effect. This is convenient for shooting fireworks and other images for which it is difficult to set the correct exposure automatically. In addition, the shooting time is shorter in comparison with the other modes because the AE function is not operating. 1 Turn the mode dial to . • The shutter speed and aperture setting will show in the display panel.
Adjusting the Exposure Compensation Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background. 1 2 3 Press the button once. • The exposure compensation bar will appear in the display panel. The bar will also appear in the LCD monitor if it is on. Press the or arrow on the omni selector to select a setting. • The settings can be adjusted in 1/3 steps in the range of -2EV to +2EV. Press the Set button.
Setting the White Balance When the white balance mode is set to match the light source, the camera can reproduce colors more accurately. Set the white balance mode to a natural or artificial light setting according to the circumstances.
Setting a Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate a subject such as a white piece of paper or white cloth. 1 Press the button twice. • The current white balance mode will appear in the display panel. The WB settings menu will appear in the LCD monitor if it is on. 2 Press the or arrow on the omni selector to select . 3 Aim the camera at the white paper or cloth and press the button.
• To set and use a custom white balance setting, it is advisable to select the shooting mode and set the exposure compensation and flash exposure compensation to zero (±0). The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white). • It is also desirable to use the LCD monitor to compose the shot and to zoom in to the maximum telephoto setting. • Since a custom white balance setting cannot be set in mode, pre-set the white mode.
Auto Exposure Bracketing (AEB Mode) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. You can adjust AEB settings in 1/3EV steps within the range of -2EV to +2EV of the standard exposure setting. AEB settings can be combined with exposure compensation settings to extend the adjustment range. 1 2 Press the times. button three • The icon and the exposure compensation bar will appear in the display panel.
Adjusting the Flash Output (Flash Exposure Compensation) You can adjust the flash output for flash photography. 1 Press the times. button four 2 Press the or arrow on the omni selector to expand or contract the range. • The icon and the flash exposure compensation bar will appear in the display panel. The flash exposure compensation bar will also appear in the LCD monitor if it is on. • The flash exposure compensation can be adjusted in 1/3 steps within a range of -2EV to +2EV.
Locking the Exposure Setting (AE Lock) You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. 1 2 3 AE Lock Icon Press the Display button to turn on the LCD monitor. Center the subject on which you want to lock the exposure setting in the LCD monitor and press the shutter button halfway to set the focus. Press the button.
Locking the Flash Exposure Setting (FE Lock) You can lock the flash exposure so that the exposure settings are correctly set for a particular portion of your subject. 1 2 Press the Display button to turn on the LCD monitor. 3 Center the subject on which you want to lock the flash exposure setting in the LCD monitor and press the shutter button halfway to set the focus. Set the built-in flash to fire. • If you are using an externally mounted flash, please refer to its manual for setting instructions.
5 Recompose the image and press the shutter button halfway again to reset the focus. • Confirm that the indicator beside the viewfinder shines orange. the shutter button all the way to 6 Press shoot the image. • As the example to the left shows, a backlit subject can be shot at the correct exposure if the FE lock is set when the camera is aimed at a non-backlit portion of the subject. • This setting cannot be adjusted in the shooting modes.
Switching between Metering Modes Center-weighted averaging is the default metering mode. This can be switched to spot metering. Center-Weighted Averaging The average value from the entire image area is combined with the value measured at the center of the viewfinder or LCD monitor. Spot The area within the frame at the center of the LCD monitor is metered. This is useful when the subject’s surroundings are bright, such as when it is backlit.
Shooting Problem Subjects for the Autofocus The autofocus may not work well on the following types of subject. - Subjects with extremely low contrast to the surroundings - Subjects mixing close and far objects - Subjects with extremely bright objects at the center of the composition - Subjects that are moving quickly To shoot these subjects, first aim the camera at an object at a similar distance, lock the focus and recompose the image with the desired subject, or use the manual focus.
the image and press the shutter button all the 4 Recompose way to shoot the image. • Method 2 is convenient because you can let go of the shutter button to recompose the image. Shooting in Manual Focus Mode The focus can be manually set. 1 2 MF Indicator Press the Display button to turn the LCD monitor on. Press and hold the MF button and press the or arrow on the omni selector. 3m 9.8 ft. 1m 3.3 ft. 0.5m 1.6 ft. 0.25m 0.8 ft • The MF indicator is a rough approximation of the focusing range.
3 Press the shutter button halfway. • The indicator beside the viewfinder will shine yellow. the shutter button all the way to 4 Press shoot the image. • This setting cannot be adjusted in the and shooting modes. • You can use the manual focus in the macro focal range (6 to 70 cm (2.4 in. to 2.3 ft.) at maximum wide angle and 20 to 70 cm (7.9 in. to 2.3 ft.) at maximum telephoto). • You can magnify an image afterward to check that it was shot in focus (p. 81).
Switching between Focus Settings You can switch between focus settings to shoot. Continuous The camera is continually focusing on whatever it is aimed even when the shutter button is not pressed, allowing you to shoot without missing opportunities. Single The camera only focuses when the shutter button is pressed halfway, conserving battery power. 1 2 3 In the [ (Rec.)] menu, select [AF Mode]. • See Selecting Menus and Settings (p. 35). Select [Continuous] or [Single] and press the Menu button.
Manually Setting Image Characteristics The ISO speed, contrast, sharpness and saturation settings can be adjusted for shooting. 1 In the [ (Rec.)] menu, select one of the above items. • See Selecting Menus and Settings (p. 35). 2 Select a value for the item and press the Menu button. ISO speed • Switch speeds when you are shooting in dark areas or want to use a fast shutter speed. • You can select from 50, 100, 200, 400 and AUTO. • The default setting is ISO 50.
Resetting the File Number You can select the way file numbers are assigned. On File number is reset to the start (100-0001) each time a new CF card is inserted. New images recorded on CF cards with existing files are assigned the next available number. Off The file number of the last image to be shot is memorized so that images recorded to a new CF card start from the next number. 1 In the [ Reset]. (Rec.)] menu, select [File No. • See Selecting Menus and Settings (p. 35).
Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode.
Replaying Viewing Images Singly (Single Image Replay) You can view the recorded images in the LCD monitor. 1 Turn the main dial to . 2 Press the or arrow on the omni selector to move between images. • The last recorded image will display (Single Image Replay). • The arrow moves to the previous image arrow to the next. Holding the and the button down moves more rapidly between images, but the images will not appear as clearly. • Press the Display button to show the data for the displayed image (p.
Magnifying Images In single image replay, the displayed image can be shown magnified by an approximate factor of 2.5 or 5. 1 2 Turn the main dial to Press the . button. • The display cycles to the next magnification mode (approximately 2.5 times, approximately 5 times, off) each time the button is pressed. / / / arrows on the omni • Use the selector to move the magnified area around the image. Magnified Approximate approximately position 2.
Viewing Nine Images at a Time (Multi Replay) Up to nine images can be viewed at once in Multi Replay. 1 2 3 Turn the main dial to Press the . button. • Nine images will display at once (Multi Replay). Press the / / / arrows on the omni selector to change the image selection. Movie Frame Selected Image • Pressing the arrow in this row displays the previous set of nine images. • Pressing the arrow in this row displays the next set of nine images. 4 Press the button.
Jumping between Images You can jump between images in single or multi replay. 1 2 3 Turn the main dial to and select either single or multi replay. Press the Jump button. • The jump bar will display. The displayed image(s) will change. Single Replay or arrow on the omni selector • Press the to jump 9 images behind or ahead. or • Hold the Set button and press the arrow on the omni selector to jump to the first or last image.
Viewing Movies You can replay the images shot in mode. 1 Turn the main dial to . 2 Press the or arrow on the omni selector to display an image shot in mode. 3 Press the Set button. • Movie images cannot be replayed in multi replay. • The movie images and sound will play. • When a movie has finished playing, it will stop and display the last frame. If the Set button is pressed in this state, the movie will start playing from the first frame.
Rotating Images in the Display Images can be rotated 90º and 270º clockwise in the LCD monitor. Original 90º 1 2 270º In the [ (Play)] menu, select [Rotate] and press the Set button. • See Selecting Menus and Settings (p. 35). Press the or arrow on the omni selector to select an image you want to rotate and press the Set button. • The image cycles to the next orientation (90º ➞ 270º ➞ original) each time the Set button is pressed. 3 Press the Menu button. • The Play menu will display again.
Automated Playback (Slide Show) Starting a Slide Show All images, or a selection of images, can be displayed one-by-one in an automated slide show. All Images Plays all the images on the CF card in order Slide Show 1 - 3 Plays the images selected for each show in order 1 In the [ (Play)] menu, select [Slide Show] and press the Set button. 2 Press the or arrow on the omni selector to select [Program]. Press the or arrow to select between [All Images] or any one of slide [Show 1][Show 3].
4 Press the Menu button. • The Slide Show menu will display again. Press the Menu button again to close the menu. • Movie images play for the length of time that they were recorded regardless of the time set in the slide show settings. • The power save function is disabled while a slide show plays on the camera (p. 29).
Selecting Images for Slide Shows You can mark images for inclusion in slide shows 1-3. Up to 100 images may be marked per slide show. Images display in the order of their selection. 1 2 Display the slide show menu. Press the or arrow on the omni selector to select [Program]. Press the or arrow to select [Show 1], [Show 2] or [Show 3] and press the Set button. • A bright green bar will appear beside a show already containing images.
Adjusting the Play Time and Repeat Settings You can change the play time for all the images in a show and have the show repeat itself continuously. Play Time Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 seconds, 15 seconds, 30 seconds and Manual. Repeat Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped. 1 2 Display the slide show menu.
Protecting Images You can protect important images from accidental erasure. 1 In the [ (Play)] menu, select [Protect] and press the Set button. 2 Press the or arrow on the omni selector to move to and select an image you want to protect and press the Set button. • See Selecting Menus and Settings (p. 35). • The icon will appear on protected images. • To remove the protection, click the Set button again (in protection mode).
Shooting / Replaying with a TV Monitor A video-compatible television connected via the supplied AV cable AVC-DC100 can be used to view images as you shoot or replay them. 1 2 Yellow Plug Black Plug To the Video In Jack To the Audio In Jack Turn the main dial to and confirm that the TV is turned off. Attach AV cable ACV-DC100 to the A/V OUT terminal on the camera. the other ends of the AV cable to 3 Plug the video in and audio in jacks on the TV. on the TV and switch it to Video 4 Turn mode.
Erasing Erasing Images Singly 1 In the [ (Play)] menu, select [Single Erase] and press the Set button. 2 Press the or arrow on the omni selector to select the image you wish to erase and press the Set button. 3 Press the or arrow on the omni selector to select [OK] and press the Set button. • See Selecting Menus and Settings (p. 35). • To continue erasing other images, repeat steps 2 - 3. • To cancel instead of erasing, select [Cancel] and press the Set button. 4 Press the Menu button.
Erasing All Images 1 2 In the [ (Play)] menu, select [Erase all] and press the Set button. • See Selecting Menus and Settings (p. 35). Press the or arrow on the omni selector to select [OK] and press the Set button. • To cancel instead of erasing, select [Cancel] and press the Set button. • Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. • Protected images cannot be erased with the erase function (p. 90).
Formatting a CF Card Format a CF card when you wish to delete all its data, not just the images. Formatting may restore a CF card if it returns an error or if the “CF” message displays. 1 In the [ (Set up)] menu, select [Format] and press the Set button. 2 Press the or arrow on the omni selector to select [OK] and press the Set button. • See Selecting Menus and Settings (p. 35). • To cancel formatting instead, select [Cancel] and press the Set button.
Print Settings (DPOF Settings) Images on a CF card can be individually selected for printing in a specified number of copies. You can also select the print type and whether or not to print the date and file number. These settings are compatible with the Digital Print Order Format (DPOF) standards so that images can be printed on DPOF-compliant digital printers or at participating photo labs. • The mark will display on images that have had print marks set by another DPOFcompliant camera.
3 Number of Copies Select images for printing. Single Images • When the print type (p. 98) is set to [Standard] or arrow on the or [Both], press the or omni selector to select an image and the arrow to mark it for printing. You can set the number of copies (up to 99) to be printed at the same time. • When the print type (p. 98) is set to [Index], or arrow on the omni selector press the to select an image and mark or remove marks and arrow.
• Images are printed in order from oldest to newest by the shooting date. • A maximum of 998 images can be marked per CF card. • When [Both] is selected, the number of copies can be set, but applies to standard prints only. Only one copy can be set to print with the [Index] setting. • Print settings can also be assigned to images with the supplied software programs on a computer.
Setting the Print Style The following print settings can be selected. Print Type Date File No. Standard Index Both Prints one image per page Prints the selected images together at a reduced size in an index format Prints the images in both the standard and index formats Adds the date to the print Adds the file number to the print 1 2 3 Display the Print Order menu. Press the or arrow on the omni selector to select [Set up] and press the Set button.
File No. or arrow on the omni selector • Press the to select [On] or [Off]. 5 Press the Menu button. • The set up menu will close. • The [Date] and [File No.] options cannot both be set to [On] when the print type is set to [index]. • The date prints as the date and time in the format specified in the Set Date/Time menu (p. 30).
Resetting the Print Settings The print settings can all be removed at once. The print type is reset to [Standard] and the date and file number options are set to [Off]. 1 2 3 Display the Print Order menu. Press the or arrow on the omni selector to select [Reset] and press the Set button. Press the or arrow on the omni selector to select [OK] and press the Set button.
List of Menu Options The chart below lists menu items and settings. See Selecting Menus and Settings (p. 35) to learn how to select a setting. Rec. Menu * Some items may not appear in certain shooting modes (p. 79). Item Resolution Settings Content Reference Page Sets the number of pixels used to record images to CF cards. • Large (2048 x 1536 pixels) • Medium (1024 x 768 pixels) p.
Item Menu Screen Settings Content Reference Page AF Mode Sets the frequency of autofocus activation. When the LCD monitor is off, this setting locks in single mode. • Continuous • Single p. 76 Review Sets the duration images display on the LCD monitor after the shutter button is released. • Off • 2 sec. • 10 sec. p. 39 File No. Reset Sets how file numbers are assigned to images when new CF cards are inserted. • On • Off p. 78 Contrast Adjusts the image contrast. ••0 •+ p.
Play Menu Item Menu Screen Settings Content Reference Page Single Erase... Erases images one-by-one (excluding protected images). While displayed images can also be quickly deleted by pressing the button. p. 92 Erase all... Erases all images from a CF card (excluding protected images). p. 93 Protect... Protects images from accidental erasure. p. 90 Rotate... Rotates images 90 or 270 degrees clockwise in the display. p. 85 Slide Show... Plays images in an automated slide show. p.
Set up Menu Item Menu Screen Beep Settings Content Sets whether or not the beep sounds when the shutter button is pressed halfway or when a menu operation is performed. Reference Page p. 34 • On • Off LCD Brightness Sets the brightness level of the LCD monitor. (Normal) • • Shutter Volume (Shooting) Playback Vol. (Replay) 104 List of Menu Options p. 34 (Off) (1) (2) (3) (4) (5) Adjusts the sound volume when a movie is played.
Item Menu Screen Settings Content Reference Page Date/Time... Sets the date, time and date format. p. 30 Format... Formats (initializes) a CF card. p. 94 Language... Sets the language used in the menus and messages on the LCD monitor. The menu may appear differently in some regions.
Using the Wireless Controller Installing the Battery Install the button battery (CR2025) into Wireless Controller WL-DC100 before use. • Be particularly careful to keep the button batteries out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall. 1 1 Place your fingertip on 1 and press it in the direction of the arrow while placing another fingertip on 2 and removing the battery holder.
Shooting / Replaying The wireless controller can be used from approximately 5 m (16.4 ft) directly in front of the camera to shoot or replay. Remote Sensor .. .. . . .. . . .. .. . . Transmitter Shooting Press the button on the camera until the panel, then replay with the wireless controller. icon appears in the display (1) Compose the image with the zoom buttons. (2) Press the shutter button. The camera will shoot the image 2 seconds later.
Using an Externally Mounted Flash (Optional) You can make your flash photography even clearer and more natural appearing with the use of a separately sold externally mounted flash. The camera’s auto exposure function will operate with a Canon Speedlite 220EX, 380EX, 420EX or 550EX. Other flashes will fire at full strength. Non-Canon brand flashes may not fire. Please check the manual for your flash.
Other Flashes • Since other flashes fire at full strength, set the shutter speed and aperture accordingly. At shutter speeds slower than 1/125 second (maximum flash synchro shutter speed) determine the appropriate aperture value setting from the flash’s guide number and the distance to the subject. You are also recommended to set the white balance to the setting. the shutter button halfway to 4 Press focus. • The flash is charged when its pilot lamp lights up.
Using Conversion Lenses (Optional) / Close-up Lenses (Optional) The separately sold Conversion Lens Adapter LA-DC58 is required to use conversion and close-up lenses with the camera, such as the separately sold Wide Converter WC-DC58, Tele-converter TC-DC58 and Close-up Lens 250D (58 mm). • Ensure that the wide converter, tele-converter and close-up lens are firmly screwed onto the adapter. Injury from glass shards can occur if the lens loosen and fall off.
Close-up Lens 250D (58 mm) This lens with a 58 mm-threaded diameter makes macro shooting easier. With the camera in macro mode, it can shoot subjects in the range of 12 to 20 cm (4.7 to 7.9 in) from the lens tip. • Do not use the built-in flash to shoot when the close-up lens is installed on the camera. Installing the Lenses 1 Remove the ring from around the lens on the camera body. 2 Screw on Conversion Lens Adapter LA-DC58 in the direction of the arrow.
• Since the image seen in the viewfinder does not change when a conversion lens is installed, use the LCD monitor to compose images. • Please note that images will not merge properly with the bundled PhotoStitch program on the computer when they are shot in mode with a conversion or close-up lens installed. • To protect the conversion lenses, hold them with one hand while you screw them on with the other hand. • Completely remove all dust and dirt from conversion lenses with a lens blower brush before use.
Downloading Images to a Computer Downloading Directly from a CF Card If you are using a notebook computer or a PC card reader, you can download directly from a CF card placed into the separately sold PC card adapter (PCMCIA adapter). The adapter is not required if your computer is equipped with a CF card reader. Place the CF card directly into the reader. Inserting the CF Card PC Card Reader Example 1 Eject the CF card from the camera and place it in the PC card adapter (optional).
Downloading Images Please refer to the Software Starter Guide for downloading instructions. 1 2 Double-click the disk drive icon of the drive to which the CF card is connected. Copy the photographed images to the desired folder on the hard disk. • The images are contained in the [XXXCANON] folder inside the [DCIM] folder on the CF card. The XXX represents a number from 100 to 998.
About File Names DCIM XXXCANON IMG_XXXX.JPG (Images shot in the JPEG format) CRW_XXXX.CRW (Images shot in the RAW format) CRW_XXXX.THM* STA_XXXX.JPG (Images shot in Stitch Assist mode) MVI_XXXX.AVI (Movie) MVI_XXXX.THM* The folder containing the files controlling the DCIM folder images CANONMSC A folder created when DPOF settings are set. Contains the files controlling the DPOF setting contents. MISC * These files contain thumbnail images for the index display.
Using the Supplied Interface Cables Supported Operating Systems Windows Windows 95, Windows 98 (including Second Edition), Windows Millennium Edition (Windows Me), Windows NT 4.0 (Service Pack 3 or later), Windows 2000. * The USB interface is only supported for preinstalled Windows 98/Me/2000 systems or systems upgraded to Windows Me from preinstalled Windows 98 systems. Macintosh Computer Mac OS 8.1 or higher QuickTime 3 or higher.
CF Card Reader or PC Card Slot (p. 113) • Windows and Macintosh Computers If you have a CF card reader or a notebook PC with a PC card slot (optional PC card adapter required), or a PC card reader (optional PC card adapter required), you can connect directly to the CF card. CF Card Reader PC Card Adapter Serial Interface - for Windows 95 / NT 4.0 or Macintosh computers lacking a built-in USB port (p. 120) A serial cable is not included with the camera.
Connecting via a USB Port • On a Windows system, the USB interface can only be used with the USB ports on systems purchased with Windows 98 or 2000 preinstalled. The USB ports on systems upgraded from Windows 3.1 or 95 to Windows 98 or 2000 will not operate correctly. The same applies to upgrades from Windows 98 to 2000. • On a Macintosh system, the USB interface can only be used with Power Macintosh NEW G3/G4, PowerBook G3, iMac and iBook models with built-in USB ports.
1 Connect the supplied USB cable to the computer’s USB port and the camera’s Digital terminal. • There is no need to shut off the camera or computer power when using the USB cable. • Please consult the manual for the computer for the position of its USB ports. USB Port Digital Terminal 1. Insert a fingernail in the terminal cover’s notch to open it. USB Cable USB Cable 2. Align the arrows to insert the cable into the camera. 2 Turn the camera’s main dial to .
Connecting via a Serial Port 1 2 Turn the computer’s power off and turn the camera’s main dial to . Connect the camera to the computer. Windows • Attach interface cable IFC-200PCS (optional) to the computer’s serial port and the camera’s Digital terminal. • Please consult the computer’s manual for the position of the serial port (COM port). Serial Port Digital Terminal 1. Insert a fingernail in the terminal cover’s notch to open it. Serial Cable Serial Cable 2.
3 4 Turn on the computer. Turn the camera’s main dial to . • Always press the PUSH button on the connector to detach the cable from the camera’s Digital terminal. PUSH Button Please consult the separate Software Starter Guide for the remaining downloading procedures.
Appendices Replacing the Button Battery If the Set Date/Time menu appears when you turn on the camera power, the button battery charge is low and the date and time settings have been lost. Please replace the battery with a generic CR2016 lithium button battery with the following procedures. The button battery is preinstalled at the factory and may therefore expire earlier than its rated lifespan after the camera has been purchased.
Negative Terminal (-) a new button battery into the 6 Place button battery holder with the negative terminal (-) facing upward. 7 Replace the button battery holder, replace the battery pack and close the battery cover. If you should dispose of your camera, first remove the button battery for recycling according to the recycling system of your country. Bij dit produkt zijn batterijen geleverd.
Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Camera body Wipe the body clean with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. • Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the nearest Canon Customer Support Help Desk (see the back of this guide).
Troubleshooting Problem Camera will not operate Cause Solution • Turn the main dial to a position other than Power is not turned on . Battery cover or CF card slot • Confirm that the battery cover is securely closed. • Confirm that the CF card slot cover is securely closed. cover is open • Fully charge the battery or use a household power Insufficient battery voltage source. ([Lb] flashes in display panel) • Wipe the terminals with a clean, dry cloth.
Problem Cause Main dial is not turned to Battery pack . will not charge Solution • Turn the main dial to . Battery life exceeded • Replace the battery pack with a new one. Poor contact between camera and compact power adapter • Plug the compact power adapter's DC plug more firmly into the camera's DC IN terminal. • Connect the power cord to the compact power adapter and insert its plug firmly into the electrical outlet.
List of Error / Message Codes The following error and message codes may appear on the display panel. Error Codes : (xx: number) The camera has experienced a problem. Turn the main dial to , wait a second, and then try shooting or replaying. If the error code appears repeatedly, there is a problem. Note the error code number and take the camera in for servicing. If an error code appears immediately after a shot, there is a chance that the image was not recorded. Check the image in replay mode.
List of Messages The following messages may appear on the LCD monitor. Busy... Image is being recorded to, or read from, CF card. No CF card: You attempted to shoot or replay images without a CF card installed. Cannot record!: You attempted to shoot an image without a CF card installed. CF card error!: CF card has experienced an anomaly. CF card full: CF card is too full to accommodate more images or print settings.
Unidentified Image You attempted to replay an image that was recorded in a special format (proprietary format used by the camera of another manufacturer, etc.). Protected!: You attempted to erase a protected image. Too many marks: Too many images have been marked for printing or for inclusion in a slide show. Cannot process any more. Cannot mark image: You attempted to set the print settings for an nonJPEG file. Cannot complete!: Couldn’t save the print or slide show settings.
Specifications PowerShot G1 Image sensor: Lens: Digital tele-converter: Autofocus method: Focusing range: (from tip of the lens barrel) Shutter: Shutter speeds: Sensitivity (equivalent film speed) : Light metering method: Exposure control method: Exposure compensation: White balance: Built-in flash: Approx. 3.34 million-pixel (total) / 1/1.8 inch CCD (Effective number of pixels: approx. 3.24 million) 7 (W) - 21 (T) mm (35mm film equivalent: 34 - 102mm) F 2.0 (W) - 2.
Terminals for external flash: Sync-terminals at accessory shoe Use of following external flashes is recommended: Canon Speedlite 220EX, 380EX, 420EX and 550EX Flash exposure compensation: ± 2.0EV (in 1/3-stop increments) Shooting modes: Auto Creative zone: Program, Shutter speed priority, Aperture priority and Manual Image zone: Pan-focus, Portrait, Landscape, Night scene, Black & white, Stitch Assist and Movie Self-timer: Activates shutter after a 10-sec.
Operating Humidity: Dimensions (W x H x D): Weight: 10 - 90 % 119.7 x 76.8 x 63.8 mm (4.7 x 3.0 x 2.5 in.) (excluding protrusions) Approx. 420 g (14.8 oz.) (camera body only) Battery Pack BP-511 Type: Nominal voltage: Nominal amperage: Charge cycles: Operating temperatures: Dimensions: Weight: Rechargeable lithium ion cell 7.4 V 1100 mAh Approx. 300 0 - 40º C (32 - 104º F) 38 x 55 x 21 mm (1.5 x 2.2 x 0.8 in.) Approx. 70 g (2.5 oz.
Charge Adapter / Car Battery Cable Kit CR-560 (Optional) • Charge Adapter CG-560 Input voltage: Input current: Nominal output: Operating temperatures: Dimensions: Weight: • Car Battery Cable CB-560 Supported vehicles: Fuse: Length: Weight: DC 9.5 V DC 2.5 A 2.7 A (DC 9.5V when charging the battery pack) DC 8.4 V 1.6 A 0 - 40º C (32 - 104º F) 93 x 36 x 71 mm (3.7 x 1.4 x 2.8 in.) Approx. 140 g (5.0 oz.) Cigarette lighter socket powered by a negative ground, DC 12 V or 24 V car battery 125 V / 4 A Approx.
Wide Converter WC-DC58 (Optional) Magnification: Focal length: Lens configuration: Focusing range (from tip of lens): Thread diameter: Dimensions: Weight: Approx. 0.8x ∞ 3 groups 3 pieces 10 mm - ∞ (0.4 in. - ∞) (when attached to a PowerShot G1 at maximum wide angle) 58 mm Standard filter threads (Conversion Lens Adapter LA-DC58 is required to install the lens on a PoweShot G1) Approx. ø 80 x 40 mm (ø 3.1 x 1.6 in.) Approx. 157 g (5.5 oz.
Index D A AEB Mode 67 AE Lock 69 AF Mode 102 Aperture-Priority AE ( ) 60 Aperture Settings 60 ) 37 Auto Mode ( Auto Exposure Bracketing (AEB Mode) Autofocus 73 Difficult Subjects 73 Auto Replay (Slide Show) 86 A/V Out Terminal 10, 91 67 B Battery Check Icon 20 Battery Pack 18 Charging 18 Handling Precautions 19 Installing 20 Performance 21 Beep On/Off 34, 104 Black and White Mode ( ) 45 Brightness 104 LCD Monitor 104 Built-in Flash 10, 41 Button Battery 122 C Camera Care and Maintenance 124 CF Card 26
Menu List of Options 101 Play 36 Rec 36 Selecting Menus and Settings 35 Set up 36 Message Codes 127, 128 Metering Center-Weighted Averaging 72 Spot 72 Mode Dial 13 Movie ( ) 49 Shooting 49 Replaying 84 Focus Auto 73 Continuous 76 Lock 73 Manual 74 Settings 76 Single 76 Format 94, 105 H Hot Shoe 12, 108 Household Power Source 22 I Image Characteristics 77 Contrast 77 ISO Speed 77 Saturation 77 Sharpness 77 Image Zone 13 Indicators 12 Information View 16 Interface 116 Cables 116 CF Card 117 Serial 117, 1
S Saturation 77, 102 Self-Timer 51 Serial Port 117, 120 Sharpness 77, 102 Shooting 31 Checking Images 39 Switching from Replay Mode 31 TV Monitor 91 Shooting Mode 79 Functions Available 79 Shutter Shutter Speed Priority AE ( ) 58 Speed 58 Volume 34, 104 Shutter Button 34 Pressing Halfway 34 Pressing Fully 34 Single Image Replay 80 Slide Show 86, 103 Play Time 89 Repeat 89 Selecting Images 88 Starting 86 Soft Case 28 Speaker 10 Specifications 130, 131, 132, 133 Spot Metering 72 Stitch Assist Mode ( ) 46 Fra
Canon Customer Support Canon Inc. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan NORTH AMERICA Canon U.S.A., Inc. Canon Customer Care Center Phone (US): 1-800-828-4040 (Available Mon. - Fri., 9 AM to 8 PM Eastern Time) Canon Canada Inc. Phone (Canada): 1-800-OK-CANON (1-800-652-2666) (24 hours/day, 7 days/week) EUROPE Europe, Africa & Middle East Canon Europa N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands Canon (UK) Ltd. Helpdesk Tel.: 08705 143 723 (Calls may be recorded.) Fax.
Canon Norge as Tlf. 22 62 93 21 Faks: 22 62 06 15 E-mail: helpdesk@canon.no Finland Canon OY Puhelin: 010 54420 Fax: 010 544 4571 Help Desk: 0600 0 22606 (14,80 mk/min+pvm) Help Desk: 0600 0 22666 (enint. 40mk/puhelu+pvm) Sähköposti: helpdesk@canon.fi Canon (Schweiz) AG Tel. 01-835-6161 Fax 01-835-6526 Hotline 0900 57 55 20 Canon Svenska AB Tel: 08-744 85 00 Fax: 08-744 64 65 Austria Canon GmbH Oberlaaerstraße 233 A-1100 Vienna Tel: 01 680 88-0 Fax: 01 680 88-308 OCEANIA Canon Australia Pty. Ltd.
140
FCC Notice (Digital Camera, Model PC1004) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
H-IE-040-V1 CY8-9020-010-000 0900CH21.3 © 2000 CANON INC.
