Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide Camera User Guide PY O C ENGLISH • Make sure you read this guide, including the “Safety Precautions” section, before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future. • Click the buttons in the lower right to access other pages.
Package Contents Preliminary Notes and Legal Information Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Battery Pack NB-11L Battery Charger CB-2LF/CB-2LFE Camera Interface Cable IFC-400PCU DIGITAL CAMERA Solution Disk* (CD-ROM) Wrist Strap WS-800 Warranty Card Getting Started * Contains software and PDF manuals (= 18). • A memory card is not included (= 2).
Cover Part Names and Conventions in This Guide Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide Zoom lever Shooting: / Playback: / Lens Speaker Shutter button Lamp Power button Microphone Flash Wi-Fi antenna area Tripod socket Memory card/battery cover DC coupler cable port Strap mount • Instructions in this guide apply to the camera under default settings.
Cover • The following camera buttons and controls are represented by icons. Up button on back Left button on back Right button on back Down button on back • Shooting modes and on-screen icons and text are indicated in brackets.
Table of Contents Package Contents..........................2 Compatible Memory Cards.............2 Preliminary Notes and Legal Information......................................2 Part Names and Conventions in This Guide......................................3 Table of Contents............................5 Contents: Basic Operations............6 Safety Precautions..........................7 2 Advanced Guide.............. 24 1 Camera Basics......................24 On/Off.................................
Contents: Basic Operations 4 Cover Applying special effects Preliminary Notes and Legal Information Shoot Contents: Basic Operations zz Use camera-determined settings (Auto Mode).....................................
c Safety Precautions Print zz Print pictures........................................................................................ 117 Save zz Save images to a computer via a cable................................................ 19 Use Wi-Fi Functions zz Send images to a smartphone.............................................................. 91 zz Share images online............................................................................. 94 zz Send images to a computer.......................
• Do not place the battery near or in direct flame. • Unplug the power cord periodically, and using a dry cloth, wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area. • Do not handle the power cord with wet hands. • Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
Cover • Do not place the battery near pets. Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage. Preliminary Notes and Legal Information Contents: Basic Operations • Do not sit down with the camera in your pocket. Doing so may cause malfunctions or damage the screen. Basic Guide • When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. • Do not attach any hard objects to the camera.
Basic Guide Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 4 Gives basic instructions, from initial preparations to shooting, playback, and saving on a computer PY O C Initial Preparations....................11 Trying the Camera Out..............15 Included Software, PDF Manuals............................18 System Map...............................
Cover Initial Preparations 2 Charge the battery. zz CB-2LF: Flip out the plug ( ) and plug Prepare for shooting as follows. Attaching the Strap CB-2LF zz Thread the end of the strap through the strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ). CB-2LFE 3 Remove the battery. Holding the Camera zz Place the strap around your wrist. zz When shooting, keep your arms close to your body and hold the camera securely to prevent it from moving.
4 Insert the memory card. Inserting the Battery and Memory Card zz Insert the memory card facing as shown Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (= 109). until it clicks into the locked position. zz Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
Cover 3 Set the home time zone. Remove the memory card. zz Push the memory card in until it clicks, zz Press the buttons to choose and then slowly release it. XX The memory card will pop up. your home time zone. 1 Turn the camera on. zz Press the power button. XX The [Date/Time] screen is displayed. 2 Set the date and time. zz Press the buttons to choose an option. zz Press the buttons to specify the date and time. zz When finished, press the button.
2 Choose [Date/Time]. zz Move the zoom lever to choose the [3] tab. zz Press the buttons to choose [Date/Time], and then press the button. Cover Display Language Change the display language as needed. 1 Enter Playback mode. zz Press the <1> button. 3 Change the date and time. zz Follow step 2 on = 13 to adjust the 2 Access the setting screen. settings. zz Press and hold the button, and zz Press the button to close the then immediately press the button. menu.
Trying the Camera Out Still Images Cover Movies 4 Shoot. Shooting Still Images Focus. Follow these instructions to turn the camera on, shoot still images or movies, and then view them. zz Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. Shooting (Smart Auto) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
Shooting Movies Start shooting. zz Press the movie button. The camera Elapsed Time beeps once as recording begins, and [ Rec] is displayed with the elapsed time. XX Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. XX Frames displayed around any detected faces indicate that they are in focus. zz Once recording begins, take your finger off the movie button. Finish shooting. zz Press the movie button again to stop shooting.
zz Movies are identified by a [ play movies, go to step 3. 2 Erase the image. ] icon. To zz Press the button, press the buttons to choose [a], and then press the button again. zz After [Erase?] is displayed, press the buttons to choose [Erase], and then press the button. XX The current image is now erased. zz To cancel erasure, press the buttons to choose [Cancel], and then press the button. 3 Play movies.
Included Software, PDF Manuals The software and PDF manuals on the included DIGITAL CAMERA Solution Disk (CD-ROM) (= 2) are introduced below, with instructions for installation, and saving images to a computer. Software After installing the software on the CD-ROM, you can do the following things on your computer. PDF Manuals Camera User Guide zz Refer to this guide for a more in-depth understanding of camera operation. Software Guide zz Refer to this guide when using the included software.
System Requirements The included software can be used on the following computers. Adobe Reader is required to view the PDF manuals. Windows Operating System*1 Windows 8 Windows 7 SP1 Windows Vista SP2 Windows XP SP3 Macintosh Mac OS X 10.6 Mac OS X 10.7 Mac OS X 10.8*2 *1 Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X 10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later. *2 Information on computer models compatible with Mac OS X 10.8 is available on the Apple website.
2 Begin the installation. zz Click [Easy Installation] and follow the on-screen instructions to complete the installation process. 3 When a message is displayed prompting you to connect the camera, connect it to a computer. zz With the camera turned off, open the cover ( ). With the smaller plug of the included interface cable (= 2) in the orientation shown, insert the plug fully into the camera terminal ( ). zz Insert the larger plug of the interface cable in the computer’s USB port.
Saving Images to a Computer CameraWindow then click [Import Untransferred Images]. computer. XX Images are now saved to the Pictures zz Follow step 3 in “Installing the Software” (= 20) to connect the camera to a computer. 2 Turn the camera on to access CameraWindow. zz Press the <1> button to turn the camera on. zz On a Macintosh computer, CameraWindow is displayed when a connection is established between the camera and computer.
• Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply. - It may take a few minutes after you connect the camera to the computer until camera images are accessible. - Images shot in vertical orientation may be saved in horizontal orientation. - Image protection settings may be cleared from images saved to a computer.
Cover Use of genuine Canon accessories is recommended. Preliminary Notes and Legal Information This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Advanced Guide 4 1 Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide Camera Basics Practical guide that introduces other camera basics and describes shooting and playback options PY O C On/Off.........................................25 Shutter Button...........................26 Shooting Display Options........26 FUNC. Menu...............................27 Cover MENU Menu...............................28 Indicator Display.......................29 Clock...
Cover On/Off Power Saving in Playback Mode Shooting Mode zz Press the power button to turn the camera on and prepare for shooting. zz To turn the camera off, press the power button again. Playback Mode The camera turns itself off automatically after about five minutes of inactivity. • You can deactivate Auto Power Down and adjust the timing of Display Off, if you prefer (= 109).
Shutter Button Shooting Display Options To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot. In this manual, shutter button operations are described as pressing the button halfway or all the way down. Press the
button to view other information on the screen, or to hide the information. For details on the information displayed, see On-Screen Information (= 131). focus.
FUNC. Menu 4 Finish the setup process. zz Press the button. Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (= 135 – 136) or playback mode (= 139). 1 Access the FUNC. menu. zz Press the button. XX The screen before you pressed the button in step 1 is displayed again, showing the option you configured. • To undo any accidental setting changes, you can restore the camera’s default settings (= 112).
MENU Menu 3 Choose a setting. zz Press the buttons to choose a Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting [4], playback [1], and so on. Note that available settings vary depending on the selected shooting or playback mode (= 137 – 139). setting. zz To choose settings with options not shown, first press the or button to switch screens, and then press the buttons to select the setting.
Indicator Display The indicator on the back of the camera (= 3) lights up or blinks depending on the camera status. Color Indicator Status On Green Blinking Cover Clock Preliminary Notes and Legal Information You can check the current time. Contents: Basic Operations zz Press and hold the button. Camera Status XX The current time appears.
Cover Preliminary Notes and Legal Information 4 2 Smart Auto Mode Convenient mode for easy shots with greater control over shooting PY O C Shooting (Smart Auto)..............31 Common, Convenient Features....................................35 Image Customization Features....................................38 Helpful Shooting Features.......40 Customizing Camera Operation..................................
Shooting (Smart Auto) Still Images Cover Movies 4 Shoot. Shooting Still Images Focus. For fully automatic selection at optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. zz Press the shutter button halfway. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. XX Several AF frames are displayed when multiple areas are in focus. 1 Turn the camera on. zz Press the power button.
Cover Shooting Movies Start shooting. zz Press the movie button. The camera Elapsed Time beeps once as recording begins, and [ Rec] is displayed with the elapsed time. XX Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. XX Frames displayed around any detected faces indicate that they are in focus. zz Once recording begins, take your finger off the movie button. esize the subject and R recompose the shot as needed.
Still Images Movies • The camera may become warm when shooting movies repeatedly over an extended period. This does not indicate damage. Microphone • Keep your fingers away from the microphone while shooting movies. Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled. • Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded. • Audio recording is monaural.
Still Images Movies Image Stabilization Icons Movies On-Screen Frames Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in [A] mode.
Cover Common, Convenient Features Still Images Movies Zooming In Closer on Subjects (Digital Zoom) When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 32x enlargement. 1 Move the zoom lever toward . zz Hold the lever until zooming stops. XX Zooming stops at the largest possible zoom • Focal length when optical and digital zoom are combined is as follows (35mm film equivalent).
Still Images XX Once you start the self-timer, the lamp will blink and the camera will play a selftimer sound. XX Two seconds before the shot, the blinking and sound will speed up. (The lamp will remain lit in case the flash fires.) zz To cancel shooting after you have triggered the self-timer, press the button. zz To restore the original setting, choose [ ] in step 1. Still Images Customizing the Self-Timer You can specify the delay (0 – 30 seconds) and number of shots (1 – 10). 1 Choose [$].
Still Images Deactivating the Flash Prepare the camera for shooting without the flash as follows. Configure the setting. Still Images Adding a Date Stamp The camera can add the shooting date to images, in the lower-right corner. However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct (= 13). zz Press the button, press the 1 Configure the setting. buttons to choose [!], and then press the button.
• Shots taken without adding a date stamp can be printed with one as follows. However, adding a date stamp this way to images that already have one may cause it to be printed twice. - Use the included software to print For details, refer to the Software Guide (= 18).
Still Images Changing Image Resolution (Size) Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see Number of 4:3 Shots per Memory Card (= 141). Still Images Red-Eye Correction Red-eye that occurs in the flash photography can be automatically corrected as follows. 1 Access the [Flash Settings] Configure the setting. screen. zz Press the button, choose [ ] in the menu, and choose the desired option (= 27).
Movies Changing Movie Image Quality 2 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see Recording Time per Memory Card (= 142). Configure the setting. Still Images Image Quality Resolution Frame Rate 25 fps For shooting in HD 640 x 480 30 fps For shooting in standard definition Movies Grid lines can be displayed on the screen for vertical and horizontal reference while shooting.
Still Images Magnifying the Area in Focus You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame. Still Images Checking for Closed Eyes [ ] is displayed when the camera detects that people may have closed their eyes. 1 Configure the setting. 1 Configure the setting. zz Press the button, choose [AF- zz Press the button, choose [Blink Point Zoom] on the [4] tab, and then choose [On] (= 28). 2 Check the focus.
Customizing Camera Operation Still Images Customize shooting functions on the [4] tab of the menu as follows. For instructions on menu functions, see MENU Menu (= 28). Still Images Deactivating the Red-Eye Reduction Lamp You can deactivate the red-eye reduction lamp that lights up to reduce redeye when the flash is used in low-light shots. Deactivating the AF Assist Beam 1 Access the [Flash Settings] screen.
Still Images Changing the Image Display Style After Shots Still Images Changing the Screen Displayed After Shots 1 Set [Display Time] to [2 sec.], You can change how long images are displayed and what information is displayed immediately after shooting. 2 Changing the Image Display Period After Shots 1 Access the [Review image after zz Press the buttons to choose [Display Info]. Press the buttons to choose the desired option (= 28).
Cover Preliminary Notes and Legal Information 4 3 Other Shooting Modes Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions PY O C Specific Scenes.........................45 Applying Special Effects..........46 Special Modes for Other Purposes..................................
Cover Specific Scenes Still Images Movies P Shoot with snowy backgrounds (Snow) Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. zz Bright, natural-colored shots of people 1 Enter <4> mode. against snowy backgrounds. Movies t Shoot fireworks (Fireworks) 2 Choose a shooting mode. zz Vivid shots of fireworks. zz Press the button, choose [G] in the menu, and then choose a shooting mode (= 27).
Applying Special Effects Still Images Add a variety of effects to images when shooting. 1 Choose a shooting mode. zz Follow steps 1 – 2 in “Specific Scenes” Shooting with a Fish-Eye Lens Effect (Fish-eye Effect) Shoot with the distorting effect of a fish-eye lens. (= 45) to choose a shooting mode. Still Images zz Press the
button, press the Shoot in vivid colors (Super Vivid) zz Shots in rich, vivid colors.
Still Images Movies Shots Resembling Miniature Models (Miniature Effect) Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 45) and choose [ ].
Still Images Shooting with a Toy Camera Effect (Toy Camera Effect) Still Images Shooting in Monochrome Shoot images in black and white, sepia, or blue and white. This effect makes images resemble shots from a toy camera by vignetting (darker, blurred image corners) and changing the overall color. zz Follow steps 1 – 2 in “Specific Scenes” (= 45) and choose [ zz Follow steps 1 – 2 in “Specific Scenes” ].
Still Images Movies Shooting with Color Accent Choose a single image color to keep and change other colors to black and white. 1 Choose [T]. zz Follow steps 1 – 2 in “Specific Scenes” (= 45) and choose [T]. 2 Access the setting screen. Cover • Using the flash in this mode may cause unexpected results. • In some shooting scenes, images may look grainy and colors may not look as expected. Still Images You can replace one image color with another before shooting.
4 Specify the new color. Special Modes for Other Purposes zz Position the center frame over the new color, and then press the button. XX The specified color is recorded. 5 Specify the range of colors to replace. zz Press the buttons to adjust the Still Images Auto Shooting After Face Detection (Smart Shutter) Auto Shooting After Smile Detection The camera shoots automatically after detecting a smile, even without you pressing the shutter button. range. 1 Choose [ ].
4 Face the camera and wink. • To change the number of shots, press the buttons after choosing [ ] in step 1. [Blink Detection] (= 41) is only available for the final shot. XX The camera will shoot about two seconds after detecting a wink by the person whose face is inside the frame. zz To cancel shooting after you have triggered the self-timer, press the button. Still Images Using the Wink Self-Timer Aim the camera at a person and press the shutter button all the way down.
2 Compose the shot and press the shutter button halfway. zz Make sure a green frame is displayed around the face you focus on and white frames around other faces. 3 Press the shutter button all the Still Images Shooting Long Exposures (Long Shutter) Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this case, mount the camera on a tripod or take other measures to prevent camera shake. way down. 1 Choose [N].
5 Use the software to combine the • If the flash fires, your shot may be overexposed. In this case, set the flash to [!] and shoot again. images. zz For instructions on merging images, refer Still Images to the Software Guide (= 18). Shooting Stitch Assist Images Shoot a large subject by taking multiple shots at various positions, and then use the software (= 18) to combine them into a panorama. zz Follow steps 1 – 2 in “Specific Scenes” (= 45) and choose [x] or [v]. 2 Take the first shot.
Cover Preliminary Notes and Legal Information 4 4 Contents: Basic Operations Basic Guide Advanced Guide P Mode More discerning shots, in your preferred shooting style PY O C • Instructions in this chapter apply to the camera in [G] mode, with the mode switch set to <4>. • [G]: Program AE; AE: Auto Exposure • Before using a function introduced in this chapter in modes other than [G], make sure the function is available in that mode (= 134 – 138). Shooting in Program AE ([P] Mode)....................
Still Images Movies Shooting in Program AE ([P] Mode) You can customize many function settings to suit your preferred shooting style. 1 Enter [G] mode. Image Brightness (Exposure Compensation) Still Images The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2. zz Follow steps 1 – 2 in “Specific Scenes” zz Press the button. As you watch (= 45) and choose [G]. 2 Customize the settings as desired (= 55 – 65), and then shoot.
XX [&] is displayed, and the exposure is locked. zz To unlock AE, release the shutter button and press the button again. In this case, [&] is no longer displayed. 3 Compose the shot and shoot. • AE: Auto Exposure Still Images Changing the ISO Speed zz Press the button, choose [ ] in the menu, and choose the desired option (= 27). XX The option you configured is now displayed.
Still Images Correcting Image Brightness (i-Contrast) Before shooting, excessively bright or dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast can also be automatically corrected before shooting to make subjects stand out better. Still Images Movies By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting.
Still Images Movies Still Images Changing Image Color Tones (My Colors) Custom White Balance For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot. Movies Change image color tones as desired, such as converting images to sepia or black and white. zz Press the button, choose [ ] in the menu, and choose the desired option (= 27).
• White balance (= 57) cannot be set in [ ] or [ ] modes. • With [ ] and [ ] modes, colors other than people’s skin tone may be modified. These settings may not produce the expected results with some skin tones. Still Images Still Images Continuous Shooting Hold the shutter button all the way down to shoot continuously. For details on the continuous shooting speed, see Continuous Shooting Speed (= 142). Movies 1 Configure the setting.
Shooting Range and Focusing Still Images Still Images Shooting Close-ups (Macro) Shooting Distant Subjects (Infinity) To restrict the focus to distant subjects, set the camera to [u]. For details on the focusing range, see Shooting Range (= 142). To restrict the focus to subjects at close range, set the camera to [e]. For details on the focusing range, see Shooting Range (= 142). zz Press the button, press the buttons to choose [u], and then press the button.
• The shutter speed may be equivalent when you move the zoom lever all the way toward for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step 2 in “Zooming In Closer on Subjects (Digital Zoom)” (= 35). Still Images Movies Changing the AF Frame Mode Change the AF (auto focus) frame mode to suit the shooting conditions as follows. zz Press the button, choose [AF Frame] on the [4] tab, and then choose the desired option (= 28).
XX When the subject is detected, the camera beeps and [ ] is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range. XX If no subject is detected, [ ] is displayed. zz To cancel tracking, press the button again. 3 Shoot. zz Press the shutter button halfway. [ ] changes to a blue [ ], which follows the subject as the camera continues to adjust the focus and exposure (Servo AF) (= 62). zz Press the shutter button all the way down to shoot.
• Focusing may not be possible in some shooting conditions. • In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode. • If adequate exposure cannot be obtained, shutter speeds and aperture values are displayed in orange. Release the shutter button, and then press it halfway again. • AF lock shooting is not available.
Flash Cover 2 Shoot. zz Even after the flash fires, ensure that Still Images the main subject does not move until the shutter sound is finished playing. Activating Flash You can have the flash fire for each shot. For details on the flash range, see Flash Range (= 142). Configure the setting. zz Press the button, press the buttons to choose [h], and then press the button. XX Once the setting is complete, [h] is displayed.
Cover Other Settings Still Images Changing the Compression Ratio (Image Quality) • If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off]. Contents: Basic Operations Basic Guide Advanced Guide Choose from two compression ratios, as follows: (Super Fine), (Fine). For guidelines on how many shots at each compression ratio can fit on a memory card, see Number of 4:3 Shots per Memory Card (= 141).
Cover Preliminary Notes and Legal Information 4 5 Contents: Basic Operations Basic Guide Advanced Guide Playback Mode Have fun reviewing your shots, and browse or edit them in many ways PY O C • It may not be possible to play back or edit images that were • To prepare the camera for these operations, press the <1> button to enter Playback mode. renamed or already edited on a computer, or images from other cameras. Viewing.......................................67 Browsing and Filtering Images........
Viewing Still Images Cover Movies zz Movies are identified by a [ play movies, go to step 3. ] icon. To Contents: Basic Operations After shooting images or movies, you can view them on the screen as follows. Basic Guide 1 Enter Playback mode. Advanced Guide zz Press the <1> button. 3 Play movies. XX Your last shot is displayed. zz To start playback, press the button, press the buttons to choose [ ], and then press the button again. 2 Browse through your images.
• To switch to Shooting mode from Playback mode, press the shutter button halfway. • To deactivate Scroll Display, press the button, choose [Scroll Display] on the [1] tab, and then choose [Off]. • If you prefer to have the most recent shot displayed when you enter Playback mode, press the button, and on the [1] tab, choose [Resume] and then [Last shot].
Browsing and Filtering Images Still Images Still Images Movies Navigating Through Images in an Index By displaying multiple images in an index, you can quickly find the images you are looking for. Finding Images Matching Specified Conditions Find desired images quickly on a memory card full of images by filtering image display according to your specified conditions. You can also protect (= 72) or delete (= 74) these images all at once. 1 Display images in an index.
• Options for viewing the images found (in step 2) include Navigating Through Images in an Index (= 69), Viewing Slideshows (= 71), and Magnifying Images (= 70). You can protect, erase, or print all images found or add them to a photobook by choosing [Select All Images in Search] in Protecting Images (= 72), Erasing All Images (= 75), Adding Images to the Print List (DPOF) (= 121), or Adding Images to a Photobook (= 123).
Still Images Movies Viewing Slideshows Automatically play back images from a memory card as follows. Each image is displayed for about three seconds. Cover Changing Slideshow Settings You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image. 1 Access the setting screen. zz Press the button, and then Choose a slideshow transition and start playback. choose [Slideshow] on the [1] tab (= 71). 2 Configure the settings.
Still Images Auto Playback of Similar Images (Smart Shuffle) Based on the current image, the camera offers four images similar to it that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after you have taken many shots, in many kinds of scenes. Protecting Images zz Press the button, and then choose [:] in the menu (= 27). [Protected] is displayed.
2 Choose a selection method. Cover Selecting a Range zz Choose a menu item and a setting as 1 Choose [Select Range]. desired (= 28). zz Following step 2 in “Using the Menu” zz To return to the menu screen, press the (= 73), choose [Select Range] and press the button. button. 2 Choose a starting image. Choosing Images Individually zz Press the button. 1 Choose [Select]. zz Following step 2 in “Using the Menu” (= 73), choose [Select] and press the button. 2 Choose an image.
zz Press the buttons to choose an image, and then press the button. zz Images before the first image cannot be selected as the last image. Still Images Erasing Images Movies You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (= 72) cannot be erased. 1 Choose an image to erase. 4 Protect the images. zz Press the buttons to choose an image.
Cover Erasing All Images You can erase all images at once. Be careful when erasing images, because they cannot be recovered. However, protected images (= 72) cannot be erased. Choosing Images Individually 1 Choose [Select]. zz Following step 2 in “Choosing a Selection Method” (= 75), choose [Select] and press the button. Choosing a Selection Method 2 Choose an image. 1 Access the setting screen.
Selecting a Range Rotating Images 1 Choose [Select Range]. zz Following step 2 in “Choosing a Selection Method” (= 75), choose [Select Range] and press the button. Still Images Movies Change the orientation of images and save them as follows. 1 Choose [\]. zz Press the button, and then choose 2 Choose images. [\] in the menu (= 27). zz Follow steps 2 – 3 in “Selecting a Range” (= 73) to specify images. 3 Erase the images. zz Press the button to choose [Erase], 2 Rotate the image.
2 Rotate the image. zz Press the buttons to choose an image. zz The image is rotated 90° each time you press the button. zz To return to the menu screen, press the button. • Movies with an image quality of [ ] cannot be rotated. • Rotation is not possible when [Auto Rotate] is set to [Off] (= 77). You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images.
2 Choose an image. zz Press the buttons to choose an image, and then press the button. [ ] is displayed. zz To untag the image, press the button again. [ ] is no longer displayed. zz Repeat this process to choose additional images. 3 Finish the setup process. Still Images Resizing Images 1 Choose [Resize]. zz Press the button and choose [Resize] on the [1] tab (= 28). PY O C Contents: Basic Operations Basic Guide Advanced Guide Save a copy of images at a lower resolution.
5 Review the new image. Cropping Area Cover 3 Adjust the cropping area. zz Press the button. [Display new XX A frame is displayed around the portion of zz Press the buttons to choose XX The original image is shown in the upper image?] is displayed. the image to be cropped. [Yes], and then press the button. XX The saved image is now displayed. • Editing is not possible for images saved as [ ] in step 3.
Still Images Still Images Changing Image Color Tones (My Colors) You can adjust image colors and then save the edited image as a separate file. For details on each option, see “Changing Image Color Tones (My Colors)” (= 58). 1 Choose [My Colors]. Correcting Image Brightness (i-Contrast) Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness.
Still Images Correcting Red-Eye Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. Editing Movies You can cut movies to remove unneeded portions at the beginning or end. 1 Choose [*]. 1 Choose [Red-Eye Correction]. zz Following steps 1 – 5 in “Viewing” zz Press the button, and then (= 67), choose [*] and press the button. XX The movie editing panel and editing bar are now displayed. choose [Red-Eye Correction] on the [1] tab (= 28).
Cover zz To cancel editing, press the Preliminary Notes and Legal Information buttons to choose [ ]. Press the button, press the buttons to choose [OK], and then press the button again. Contents: Basic Operations Basic Guide 4 Save the edited movie. Advanced Guide zz Press the buttons to choose [ ], and then press the button. zz Press the buttons to choose [New File], and then press the button. XX The movie is now saved as a new file.
Cover Preliminary Notes and Legal Information 4 6 Contents: Basic Operations Basic Guide Advanced Guide Wi-Fi Functions Use Wi-Fi functions to send images from the camera to a variety of compatible devices, and use the camera with Web services PY O C What You Can Do With Wi-Fi....84 Using Wi-Fi to Send Images From the Camera.....................85 Wi-Fi (Wireless LAN) Precautions..............................85 Security Precautions................86 Glossary.....................................
Cover What You Can Do With Wi-Fi Connecting to a Computer Use the included software to wirelessly send images from the camera to a computer. Refer to the Software Guide for details. This camera is an approved Wi-Fi * product. You can wirelessly connect to and send images to the following devices. Note that, in this chapter, wireless LAN functions other than Wi-Fi may be referred to as Wi-Fi.
Using Wi-Fi to Send Images From the Camera Operation Device Preparations Connection Send/Print/ Import Registering a camera nickname (= 88) ○ ○ ○ ○ ○ Installing the included software (= 18)*1 ○ – – ○ – Adjusting settings for using Web services from CANON iMAGE GATEWAY (= 89) ○ – – – – Installing the dedicated application on the smartphone (= 91) – ○ – – – ○ (= 89) ○ (= 91) ○ (= 93) ○ (= 94) ○ (= 99) ○*2 ○ ○ – – Transferring images to a computer (= 98) – – –
• When transferring this product to another person, disposing of it, or sending it for repair, be sure to note the wireless LAN settings and reset the product to its default settings (erase settings) if necessary. • Canon will not make compensation for loss or theft of the product. Canon accepts no responsibility for damages incurred due to unauthorized access to registered data (image transfer destinations, etc.) if the product is lost or stolen. • Be sure to use the product as directed in this guide.
Cover Glossary Wi-Fi related terms are explained here. Also refer to the explanations of terms given in the respective sections of this guide. • Access point A device that relays radio wave signals to create a Wi-Fi network. This term also refers to a network that you can use to connect to the Internet via Wi-Fi. • Firewall This is a system that protects networks from computer viruses, external unauthorized access, and security threats. This is set on the Wi-Fi router or computer.
Registering a Camera Nickname (First time only) To start with, register a camera nickname. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. 1 Access the Wi-Fi menu. Cover • When connecting wirelessly to any device other than a computer, a memory card must be inserted in the camera. Additionally, the memory card must contain images in order for you to access Web services or connect to a smartphone or printer wirelessly.
Connecting to Web Services 2 Connect the camera to a computer with the interface cable (= 20). Set up the camera to use a variety of Web services as follows. Adjusting Settings for Using Web Services From CANON iMAGE GATEWAY zz On a computer running Windows, there is no need to connect the interface cable if you complete settings in advance (= 95). In this case, you can connect via Wi-Fi. Adjust account settings for the Web services you want to use.
6 Set a Web service you want to use. zz Follow the on-screen instructions to complete settings for Web services you want to use. zz Once the Web service settings are complete, click [Finish] at the bottom of the window to close it. 7 Apply Web service settings to Cover • After logging in to CANON iMAGE GATEWAY the second time in step 5, the screen in step 7 will be displayed. To change settings for Web services you use, click [Edit Web Services].
XX When you have connected to the Web service, the image transfer screen will be displayed. Proceed to “Sending Images” (= 101). However, when [Send via Server] is selected, images will be sent as soon as a connection is established (= 103). • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 2.
4 Use the smartphone to connect • For details on this application (supported smartphones and included functions), refer to the Canon website. to the network displayed on the camera screen. Establishing the Smartphone Connection zz Choose the displayed SSID (network 1 Access the Wi-Fi menu. name) from the smartphone’s Wi-Fi setting menu. zz Enter the encryption key displayed on the camera screen into the password field on the smartphone. zz Press the button. 2 Choose a smartphone.
XX When the smartphone has been added successfully, the image transfer screen will be displayed. Proceed to “Sending Images” (= 101). • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 – 5 in “Adding a Computer” (= 96).
• After you have accessed the Wi-Fi menu once, you can access it again by pressing the button. The recent target device is listed first, so you can easily connect again by pressing the buttons to choose it. To add a new device, display the device selection screen by pressing the buttons, and then configure the setting. If you prefer not to display recent target devices, press the button, and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
Cover Checking Your Wi-Fi Environment • A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an internal Wi-Fi function is called a “Wi-Fi router”. • This guide refers to all Wi-Fi routers and base stations as “access points”. • If you use MAC address filtering on your Wi-Fi network, be sure to add the camera’s MAC address to your access point.
2 Choose a computer. • The following Windows settings are configured when you run the utility in step 2. zz Press the buttons to - Turn on media streaming. This will enable the camera to find the computer to access via Wi-Fi. - Turn on network discovery. This will enable the computer to find the camera. - Turn on ICMP (Internet Control Message Protocol). This allows you to check the network connection status. - Enable Universal Plug & Play (UPnP).
XX After driver installation is complete, and 6 Establish the connection. the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen. zz Proceed to Using CameraWindow to Transfer Images to a Computer (= 98). zz On the access point, hold down the WPS connection button for a few seconds. zz On the camera, press the button. XX The camera will connect to the access point.
5 Choose a computer to connect to. Connecting to Access Points in the List zz Choose the computer to connect to, 1 View the listed access points. following steps 7 – 8 in “Adding a Computer” (= 97). The computer is now added to the list. zz View the listed networks (access points) as described in steps 1 – 3 of “Adding a Computer” (= 96). 2 Choose an access point. zz Press the buttons to choose a network (access point), and then press the button.
XX On a Macintosh computer, CameraWindow is automatically displayed when a Wi-Fi connection is established between the camera and computer. 2 Import images. zz Click [Import Images from Camera], and then click [Import Untransferred Images]. XX Images are now saved to the Pictures folder on the computer, in separate folders named by date. zz Click [OK] in the screen that is displayed after image import is complete.
4 Use the printer to connect to the network displayed on the camera screen. zz Choose the displayed SSID (network name) from the printer’s Wi-Fi setting menu. zz Enter the encryption key displayed on the camera screen into the password field on the printer. 5 Choose the printer. zz Once the printer is ready for the connection, press the button when the printer name is displayed on the camera. XX When the printer has been added successfully, the printing screen will be displayed.
Sending Images zz Repeat this process to choose additional images. zz After you finish choosing images, press Send images wirelessly to destinations registered on the camera as follows. the button. • Images can be uploaded to social networking services or sent to email addresses, via CANON iMAGE GATEWAY. For details, refer to the CANON iMAGE GATEWAY website. • Up to 50 images can be sent together at once. You can send movies together as long as the total playback time is within two minutes.
• Keep your fingers or other objects off the Wi-Fi transmitterreceiver. Covering this may decrease the speed of your image transfers. • On the screen, wireless signal strength is indicated by the following icons. [ ] high, [ ] medium, [ ] low, [ ] weak • To disconnect from the camera, press the button. After the confirmation message, press the buttons to Wi-Fi Antenna choose [OK], and then press the button. You can also use Area the smartphone to end the connection.
Sending Images to a Computer via CANON iMAGE GATEWAY Images on the memory card that have not been transferred already can be sent to a computer via CANON iMAGE GATEWAY. If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server. However, the images will be deleted after a while. Start up the computer so that they can be saved. 1 Choose the type of images to send (only when sending movies with images).
Editing or Erasing Wi-Fi Settings 4 Choose a device to edit. zz Press the buttons to choose Edit or erase Wi-Fi settings as follows. the device to edit, and then press the button. Editing Connection Information Edit connection information saved to the camera. You can change device nicknames (display names) that are displayed on the camera, and erase connection information. The following explains the procedure when the target device is a computer. 5 Choose an option to edit.
Changing a Device Nickname You can change the device nickname (display name) that is displayed on the camera. Returning the Wi-Fi Settings to Default Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it. Change the nickname. 1 Choose [Wi-Fi Settings]. zz Following step 5 in “Editing Connection zz Press the button, and then Information” (= 104), choose [Change Device Nickname] and press the button.
Cover Preliminary Notes and Legal Information 4 7 Setting Menu Customize or adjust basic camera functions for greater convenience PY O C Adjusting Basic Camera Functions................................
Adjusting Basic Camera Functions Functions can be configured on the [3] tab. Customize commonly used functions as desired, for greater convenience (= 28). Silencing Camera Operations Hiding Hints and Tips Hints and tips are normally shown when you choose FUNC. menu (= 27) or Menu (= 28) items. If you prefer, you can deactivate this information. zz Choose [Hints & Tips], and then choose Silence camera sounds and movies as follows. [Off]. zz Choose [Mute], and then choose [On].
World Clock Lens Retraction Timing To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/ Time setting manually. Before using the world clock, be sure to set the date and time and your home time zone, as described in Setting the Date and Time (= 13).
Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (= 25). Cover • For maximum brightness, press and hold the
button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [LCD Brightness] setting on the [3] tab.) To restore the original brightness, press and hold the
button again for at least one second or restart the camera.
Cover 2 Choose [OK]. zz Press the buttons to choose [Cancel], press the buttons to choose [OK], and then press the button. Low-Level Formatting Perform low-level formatting in these cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops. Low-level formatting erases all data on a memory card.
File Numbering Metric/Non-Metric Display Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers. Change the unit of measurement shown in GPS information for elevation (= 68) and elsewhere from m/cm to ft/in as needed. zz Choose [Units], and then choose [ft/in]. zz Choose [File Numbering], and then choose an option.
Display Language Change the display language as needed. zz Choose [Language the button. If you accidentally change a setting, you can restore default camera settings. ], and then press zz Choose [Reset All], and then press the button. zz Press the buttons to zz Press the buttons to choose choose a language, and then press the button.
Cover Preliminary Notes and Legal Information 4 8 Accessories Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately PY O C Optional Accessories.............114 Using Optional Accessories..115 Printing Images.......................
Optional Accessories The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available. Power Supplies Battery Pack NB-11L Cover • The battery charger and AC adapter kit can be used in areas with 100 – 240 V AC power (50/60 Hz). • For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery.
Still Images Using Optional Accessories Still Images 3 Turn the TV on and switch to Movies video input. zz Switch the TV input to the video input you Movies connected the cable to in step 2. Playback on a TV 4 Turn the camera on. Connecting the camera to a TV with the AV Cable AVC-DC400 (sold separately) enables you to view your shots on the larger screen of the TV as you control the camera. For details on connection or how to switch inputs, refer to the TV manual.
Still Images 4 Close the cover. Movies Powering the Camera with Household Power zz Lower the cover ( ) and hold it down as you slide it, until it clicks into the closed position ( ). Powering the camera with AC Adapter Kit ACK-DC90 (sold separately) eliminates the need to monitor the remaining battery level. 1 Make sure the camera is off. 2 Open the cover. 5 Connect the power cord. zz Insert the adapter plug into the end of the coupler cable.
Still Images Printing Images 3 Turn the printer on. 4 Turn the camera on. Movies zz Press the <1> button to turn the camera Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks. A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer.
Still Images Configuring Print Settings 1 Access the printing screen. Still Images Cropping Images Before Printing (Cropping) By cropping images before printing, you can print a desired image area instead of the entire image. zz Follow steps 1 – 6 in “Easy Print” 1 Choose [Cropping]. (= 117) to access the screen at left. 2 Configure the settings. zz After following step 1 in “Configuring Print Settings” (= 118) to access the printing screen, choose [Cropping] and press the button.
Cover Still Images 4 Choose a layout. Choosing Paper Size and Layout Before Printing zz Press the buttons to choose an option. zz When choosing [N-up], press the buttons to specify the number of images per sheet. zz Press the button. 1 Choose [Paper Settings]. zz After following step 1 in “Configuring Print Settings” (= 118) to access the printing screen, choose [Paper Settings] and press the button. 2 Choose a paper size.
Still Images Printing ID Photos 1 Choose [ID Photo]. Movies Printing Movie Scenes 1 Access the printing screen. zz Following steps 1 – 4 in “Choosing zz Follow steps 1 – 6 in “Easy Print” Paper Size and Layout Before Printing” (= 119), choose [ID Photo] and press the button. (= 117) to choose a movie. The screen at left is displayed. 2 Choose a printing method. 2 Choose the long and short side length.
Still Images Adding Images to the Print List (DPOF) Batch printing (= 123) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to DPOF (Digital Print Order Format) standards.
3 Specify the number of prints. zz Press the buttons to specify the number of prints (up to 99). zz To set up printing for other images and specify the number of prints, repeat steps 2 – 3. zz Printing quantity cannot be specified for index prints. You can only choose which images to print, by following step 2. zz When finished, press the button to return to the menu screen.
Still Images Printing Images Added to the Print List (DPOF) zz When images have been added to the print list (= 121 – 122), the screen at left is displayed after you connect the camera to a PictBridge-compatible printer. Press the buttons to choose [Print now], and then simply press the button to print the images in the print list. zz Any DPOF print job that you temporarily stop will be resumed from the next image.
Cover Still Images Preliminary Notes and Legal Information Adding All Images to a Photobook Contents: Basic Operations zz Following the procedure in “Choosing a Selection Method” (= 123), choose [Select All Images] and press the button. Basic Guide Advanced Guide zz Press the buttons to choose [OK], and then press the button.
Cover Preliminary Notes and Legal Information 4 9 Appendix Helpful information when using the camera PY O C Troubleshooting......................126 On-Screen Messages..............129 On-Screen Information...........131 Functions and Menu Tables......................................134 Handling Precautions.............140 Specifications..........................
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Strange display on the screen under low light (= 26). Strange display on the screen when shooting. Nothing happens when the power button is pressed. Note that the following display problems are not recorded in still images but are recorded in movies. • The screen may darken under bright light.
Subjects in shots look too dark. • • • • Set the flash mode to [h] (= 64). Adjust brightness by using exposure compensation (= 55). Adjust contrast by using i-Contrast (= 57, 80). Use AE lock or spot metering (= 55, 56). Subjects look too bright, highlights are washed-out. • Set the flash mode to [!] (= 37). • Adjust brightness by using exposure compensation (= 55). • Use AE lock or spot metering (= 55, 56). • Reduce the lighting on subjects.
Computer Cannot transfer images to a computer. When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows. • Press the <1> button to enter Playback mode. Hold the button down as you press the and buttons at the same time. On the next screen, press the buttons to choose [B], and then press the button. Wi-Fi Cannot access the Wi-Fi menu by pressing the button. • The destination device has insufficient storage space.
On-Screen Messages If an error message is displayed, respond as follows. No memory card • The memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way (= 12). Memory card locked • The write-protect tab of the memory card is set to the locked position. Switch the write-protect tab to the unlocked position (= 12). Cannot record! • Shooting was attempted without a memory card in the camera. To shoot, insert a memory card facing the correct way (= 12).
A camera error was detected (error number) • If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image. • Frequent display of this error message may indicate camera damage. In this case, write down the error number (Exx) and contact a Canon Customer Support Help Desk.
Receiving failed Insufficient space on card • There is not enough free space on the memory card to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space. Cover On-Screen Information Preliminary Notes and Legal Information Shooting (Information Display) Contents: Basic Operations Receiving failed Memory card locked Basic Guide • The write-protect tab of the memory card in the camera to receive the images is set to the locked position.
Flash mode (= 37, 64) Red-eye correction (= 39) Spot AE point frame (= 56) AF frame (= 61) Image stabilization (= 65) Date stamp (= 37) ISO speed (= 56) Time zone (= 108) AE lock (= 55), FE lock (= 64) Shutter speed Aperture value Exposure compensation level (= 55) i-Contrast (= 57) Zoom bar (= 31) IS mode icon (= 34) Blink detection (= 41) Exposure compensation bar (= 55) Playback (Detailed Information Display) Display Details Sufficient charge Slightly depleted, but sufficient (Bli
Protection (= 72) Favorites (= 77) My Colors (= 58, 80) Red-eye correction (= 39, 81) Cover Shooting date/time (= 13) Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide • Some information may not be displayed when viewing images on a TV (= 115). Advanced Guide Summary of Movie Control Panel in “Viewing” (= 67) Exit Play Slow Motion (Press the buttons to adjust the playback speed. No sound is played.
Cover Functions and Menu Tables Preliminary Notes and Legal Information Functions Available in Each Shooting Mode Shooting Mode 4 A Function Exposure Compensation (= 55) Flash (= 37, 64) h Z ! AE Lock (= 55)/FE Lock (= 64)*2 AF Lock (= 63) Focusing Range (= 60) eu Tracking AF (= 61) Screen Display (= 26) No Information Display Information Display *1 Not available, but switches to [Z] in some cases. *2 FE lock not available in [!] flash mode.
Cover FUNC.
Cover Shooting Mode 4 A Y T G I O O O O O O O – O – O – O – O – O – O O O O O O Function Resolution (= 39) – – O – P t N x v O O O O O – O – O – O – O – O – O – – – – – – – – O – O – O – O – – – – – – – – O O O O Compression (= 65) – O – – – – – – – – – – – – – – – – O O O O O O O O O O O O O O O O O O O O O O O O O O *1 O O O O O O O O O Movie Quality (= 40) *1 Synchronizes with the aspect
Cover 4 Shooting Menu Preliminary Notes and Legal Information Shooting Mode 4 A Function AF Frame (= 61) Face AiAF*1 Tracking AF Center AF Frame Size (= 62)*2 Normal Small Digital Zoom (= 35, 60) Standard Off 1.6x/2.0x AF-Point Zoom (= 41) On Off Servo AF (= 62) On Off Continuous AF (= 63) On Off AF-assist Beam (= 42) On Off *1 Operation when no faces are detected varies by shooting mode. *2 Available when the AF frame is set to [Center]. *3 [On] when subject movement is detected in [A] mode.
Cover Shooting Mode 4 A On Off On/Off Red-Eye Lamp i-Contrast (= 57) Auto Off Review image after shooting (= 43) Display Time Off/Quick/2 sec./4 sec./8 sec.
Cover 3 Set up Menu Item 2 Print Menu Ref. Page Item Ref. Page Item Preliminary Notes and Legal Information Ref. Page Item Ref. Page Mute = 107 Format Select All Images = 122 Volume = 107 File Numbering = 111 Select Images & Qty.
Handling Precautions Specifications Cover Preliminary Notes and Legal Information • The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact. Camera Effective Pixels (Max.) Approx. 16 million pixels Contents: Basic Operations • Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data. Lens Focal Length 8x zoom: 5.0 (W) – 40.
Cover Dimensions (Based on CIPA Guidelines) Weight (Based on CIPA Guidelines) ELPH 130 IS IXUS 140 95.4 x 56.0 x 20.6 mm (3.76 x 2.20 x 0.81 in.) ELPH 120 IS IXUS 135 92.9 x 52.4 x 21.6 mm (3.66 x 2.06 x 0.85 in.) ELPH 130 IS IXUS 140 Approx. 133 g (approx. 4.69 oz.; including the battery and memory card) Approx. 117 g (approx. 4.13 oz.; camera body only) ELPH 120 IS IXUS 135 Approx. 134 g (approx. 4.73 oz.; including the battery and memory card) Approx. 118 g (approx. 4.16 oz.
Cover Recording Time per Memory Card Shooting Range Recording Time per Memory Card Image Quality 8 GB 32 GB 49 min. 15 sec. 3 hr. 19 min. 00 sec. 1 hr. 28 min. 53 sec. 5 hr. 59 min. 05 sec. • The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings.
Cover Battery Charger CB-2LF/CB-2LFE Preliminary Notes and Legal Information Rated Input: 100 – 240 V AC (50/60 Hz) 4.2 V DC, 0.41 A Rated Output: Charging Time: Approx. 2 hr. (when using NB-11L) Charge Indicator: Charging: orange / Fully charged: green (two-indicator system) Operating Temperatures: 5 – 40 °C (41 – 104 °F) Contents: Basic Operations Basic Guide Advanced Guide • All data is based on tests by Canon. • Camera specifications or appearance are subject to change without notice.
Index D A C AC adapter kit......................................114 Accessories.........................................114 Access point Manual settings.............................. 98 Number of display items................. 98 Adding target devices Camera.......................................... 93 Computer....................................... 96 Printer............................................. 99 Smartphone.................................... 91 Web services..................................
ISO speed............................................ 56 L Lamp.................................................... 42 Long shutter (shooting mode).............. 52 Low light (shooting mode).................... 45 M MAC address........................................ 95 Macro (focus mode)............................. 60 Magnified display.................................. 70 Memory cards................................... 2, 88 Recording time............................. 142 Menu Basic operations..........
Cover CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION. FCC/IC Notice Models: ELPH 130 IS PC1889/ ELPH 120 IS PC1896 (including WLAN Module Model WM218, FCC ID: AZD218) The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe.
Cover FCC Notice (Digital Camera, Model ELPH 130 IS PC1889/ ELPH 120 IS PC1896 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
