PowerShot D30 Camera User Guide

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
42
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Deactivating the Flash
Prepare the camera for shooting without the ash as follows.
 Press the <r> button, press the <q><r>
buttons to choose [!], and then press
the <m> button.
 Once the setting is complete, [!] is
displayed.
 To restore the original setting, repeat this
process but choose [
].
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so conrm
beforehand that the date and time are correct (= 15).
1 Congurethesetting.
 Press the <n> button, choose [Date
Stamp] on the [4] tab, and then choose
the desired option (=
26).
 Once the setting is complete, [DATE] is
displayed.
2 Shoot.
 As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
 To restore the original setting, choose
[Off] in step 1.
• Date stamps cannot be edited or removed.