PowerShot D30 Camera User Guide

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
33
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
3 Choosethelogletoexamine.
 To the right of today’s date, the time
elapsed from the last time location
information was recorded is displayed.
 Choose the desired date and press the
<m> button. The recorded latitude,
longitude, time, and number of logs
acquired that day are displayed.
 Press the <n> button twice to return
to the [GPS Settings] screen. When
you press the <n> button again,
a message about GPS and logging is
displayed. Press the <m> button after
reading the message.
Number of Logs Acquired
Latitude Longitude Time
Automatically Updating the Date and Time
You can have the date and time for the congured time zone ( = 15, 109)
automatically updated when the camera receives GPS signals.
Your shots will be tagged with the shooting date/time as updated (= 82,
in UTC format), along with location information (= 30).
1 Set [GPS] to [On].
 Follow steps 1 – 2 in “Using GPS
Functions” (=
30) to congure the
setting.
2 Congurethesetting.
 Press the <n> button, choose
[GPS Auto Time] on the [3] tab, and then
choose [On] (=
26).
 To set daylight saving time, follow the steps
in “Setting the Date and Time” (
= 16 ).
ConrmingAutomaticTimeUpdating
After the date and time are automatically updated, [Update completed] is
shown on the [Date/Time] screen, accessed as described in “Changing the
Date and Time” (= 16). [GPS Auto Time: On] is shown if a GPS signal
has not been received yet.
• When [GPS Auto Time] is set to [On], you cannot change the date
and time by accessing the [Date/Time] screen as described in
“Changing the Date and Time” (= 16), because this information
will be updated automatically.