Camera User Guide Y P O C • Make sure you read this guide, including the Safety Precautions before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future.
Checking the Package Contents Check if the following items are included in your camera package. If anything is missing, contact the retailer where you purchased the camera.
Read This First Test Shots and Disclaimer Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
What Do You Want to Do? 4 Shoot z Shoot, leaving it to the camera to make settings .........................20 Take good people shots I Portraits (p. 58) V Kids and pets (p. 58) w At the beach (p. 59) P Against snow (p. 59) Shoot various other scenes Low Light (p. 59) Y P O C O Foliage (p. 59) U Sunsets (p. 59) t Fireworks (p. 60) Shoot with special effects Super vivid colors (p. 61) Poster Effect (p. 61) z Focus on faces .................................................................
What Do You Want to Do? 1 View z Look at my pictures ......................................................................23 z Automatically play back pictures (slideshow)...............................88 z Look at my pictures on a TV ........................................................91 z Look at my pictures on a computer. .............................................28 z Quickly search pictures ..........................................................86, 87 z Erase pictures .....................
Table of Contents Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter. Checking the Package Contents .......2 Read This First ..................................3 What Do You Want to Do? ................4 Table of Contents ..............................6 Safety Precautions.............................8 Conventions Used in This Guide .....
Table of Contents Changing the Tone of an Image (My Colors) .......................................... 71 Shooting Close-ups (Macro) ........... 72 Shooting Far Away Subjects (Infinity) ......................................... 72 Changing the AF Frame Mode........ 73 Magnifying the Focal Point.............. 75 Shooting with the AF Lock .............. 76 Changing the Metering Method....... 76 Shooting with the AE Lock .............. 77 Shooting with the FE Lock ..............
Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death.
Safety Precautions Caution Denotes the possibility of injury. • Be careful not to bang the camera or subject it to strong impacts or shocks when hanging it by the strap. • Be careful not to bump or push strongly on the lens. This could lead to injury or damage the camera. • When using the flash, be careful not to cover it with your fingers or clothing. This could result in burns or damage to the flash.
Conventions Used in This Guide • Do not sit down with the camera in your pocket. Doing so may cause malfunctions or damage the screen. • When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. • Do not attach any hard objects to the camera. Doing so may cause malfunctions or damage the screen. Y P O C Conventions Used in This Guide • Icons are used in the text to represent the camera buttons and switches.
1 Getting Started This chapter explains preparations before shooting, how to shoot in » mode, and then how to view and erase the images you take. The latter Y P O C part of this chapter explains how to shoot and view movies and transfer images to a computer. Attaching the Strap/Holding the Camera • Attach the included strap and wrap it around your wrist to avoid dropping the camera during use. • Keep your arms tight against your body while holding the camera firmly by the sides when shooting.
Compatible Memory Cards (Sold Separately) The cards below can be used without restrictions on their capacities. • SD memory cards* • SDHC memory cards* • SDXC memory cards* • MultiMediaCards • MMCplus memory cards • HC MMCplus memory cards * This memory card complies with the SD standards. Some cards may not operate properly depending on the brand of card used. Depending on your computer’s OS version, SDXC memory cards may not be recognized even when using a commercially available card reader.
Inserting the Batteries and Memory Card Insert the memory card. z Insert the memory card as shown until it locks into place with a click. z Be sure the memory card is oriented correctly. Inserting the memory card in the wrong direction could damage the camera. Label Close the cover. z Close the cover ( ), and press downward as you slide it until it clicks into place ( ). Y P O C What if [Memory card locked] appears on the screen? SD, SDHC and SDXC memory cards have a write-protect tab.
Inserting the Batteries and Memory Card Compatible Batteries AA alkaline batteries and Canon AA NiMH batteries (sold separately) (p. 33). Can any other batteries be used? We cannot recommend the use of any other batteries than those listed above because performance varies widely. Why use NiMH batteries? NiMH batteries last much longer than alkaline batteries, especially in cold weather. Battery Charge Indicator When battery charge is low, an icon and message will appear.
Setting the Date and Time The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them. Turn on the camera. z Press the power button. X The Date/Time screen will appear. Set the date and time. z Press the qr buttons to choose an option. z Press the op buttons to set a value. Y P O C Complete the setting. z Press the m button.
Setting the Date and Time Changing the Date and Time You can change the current date and time settings. Display the menu. z Press the n button. Choose [Date/Time]. z Press the zoom buttons to choose the 3 tab. z Press the op buttons to choose Y P O C [Date/Time], then press the m button. Change the date and time. z Follow Steps 2 and 3 on p. 15 to adjust the setting. z Press the n button to close the menu.
Setting the Display Language You can change the language that displays on the screen. Enter Playback mode. z Press the 1 button. Display the settings screen. z Press and hold the m button, then press the n button. Y P O C Set the display language. z Press the opqr buttons to choose a language, then press the m button. X Once the display language has been set, the settings screen will close. You can also change the display language by pressing the n button to choose [Language] from the 3 tab.
Formatting Memory Cards Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Display the menu. z Press the n button. Choose [Format]. z Press the zoom buttons to choose the 3 Y P O C tab. z Press the op buttons to choose [Format], then press the m button.
Pressing the Shutter Button Complete formatting. X When formatting ends, [Memory card formatting complete] will appear on the screen. z Press the m button. Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
Taking Pictures (Smart Auto) Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels. Turn on the camera. z Press the power button. X The start-up screen will appear. Enter » mode. button, then press the qr buttons to choose » and press the m button.
Taking Pictures (Smart Auto) X When the camera focuses, it will beep twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point. AF Frame Shoot. z Press the shutter button fully to shoot. X The camera will play the shutter sound and Y P O C shoot. The flash will automatically fire in low light conditions. X The image will appear on the screen for approximately two seconds.
Taking Pictures (Smart Auto) • What if the image comes out dark even if the flash fired when shooting? The subject is too far away for the flash to reach. The effective flash range is approximately 30 cm – 3.0 m (12 in. – 9.8 ft.) at maximum wide angle (j), and approximately 30 cm – 2.0 m (12 in. – 6.6 ft.) at maximum telephoto (i). • What if the camera beeps once when the shutter button is pressed halfway? Your subject may be too close. When the camera is at maximum wide angle (j), move about 1 cm (0.
Viewing Images You can view the images you have taken on the screen. Enter Playback mode. z Press the 1 button. X The last image you took will appear. Choose an image. z Pressing the q button will cycle through the images from newest to oldest. z Pressing the r button will cycle through the images from oldest to newest. Y P O C z The images change more quickly if you keep the qr buttons pressed, but they will appear coarse. z The lens will retract after approximately 1 minute elapses.
Erasing Images You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. z Press the 1 button. X The last image you took will appear. Choose an image to erase. z Press the qr buttons to display an image to erase. Y P O C Erase the image. z Press the p button. z Press the qr buttons to choose [Erase], then press the m button. X The displayed image will be erased.
Shooting Movies The camera can automatically select all settings so that you can shoot movies just by pressing the shutter button. Enter E mode. button and press the qr buttons to choose E, then press the m button. z Press the Remaining Time Y P O C Compose the shot. z Pressing the i zoom button will zoom in on your subject, making it appear larger. Pressing the j zoom button will zoom out from your subject, making it appear smaller. Focus. z Press the shutter button halfway to focus.
Shooting Movies Elapsed Time X Recording will start, and [ Rec] and the elapsed time will appear on the screen. z Once shooting begins, take your finger off the shutter button. z If you change the composition of your shot during shooting, the focus will stay the same, but the brightness and tone will automatically adjust. z Do not touch the microphone while shooting. z Do not press any buttons other than the Microphone shutter button while shooting.
Viewing Movies You can view the movies you have shot on the screen. Enter Playback mode. z Press the 1 button. X The last image you took will appear. X appears on movies. Choose a movie. z Press the qr buttons to choose a movie, then press the m button. z The movie control panel will appear. Y P O C Play the movie. z Press the qr buttons to choose (Play), then press the m button. X The movie will play. z If you press the m button, the movie will pause and the movie control panel will appear.
Transferring Images to a Computer for Viewing You can use the included software to transfer images you have shot with the camera to a computer for viewing. If you are already using software included with another Canon-brand compact digital camera, install the software from the included CD-ROM, overwriting your current installation.
Transferring Images to a Computer for Viewing Preparations Windows Vista and Mac OS X (v10.5) are used for these explanations. Install the Software. Windows Place the CD in the computer’s CDROM drive. z Place the supplied CD-ROM (DIGITAL CAMERA Solution Disk) (p. 2) into the computer’s CD-ROM drive. Begin installation. Y P O C z Click [Easy Installation] and follow the on-screen instructions to proceed with the installation.
Transferring Images to a Computer for Viewing Connect the camera to the computer. z Turn off the camera. z Open the cover and insert the included interface cable’s smaller plug (p. 2) firmly into the camera terminal in the direction shown. z Insert the interface cable’s larger plug into the computer. For connection details, refer to the user guide provided with the computer. Turn on the camera. Y P O C z Press the 1 button to turn on the camera. Open CameraWindow.
Transferring Images to a Computer for Viewing For Windows 7, use the following steps to display CameraWindow. Click on the task bar. In the screen that appears, click the link to modify the program. Choose [Downloads Images From Canon Camera using Canon CameraWindow] and click [OK]. Double click . Transfer and View Images z Click [Import Images from Camera], and then click [Import Untransferred Images]. X All images not previously transferred will transfer to the computer.
Accessories Supplied with Camera Wrist Strap WS-800 DIGITAL CAMERA Solution Disk AA Alkaline Batteries (x2) Interface Cable IFC-400PCU* Y P O C *Also available for purchase separately.
Separately Sold Accessories The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Power Supplies AC Adapter Kit ACK800 z This kit lets you power the camera using household power. Recommended for powering the camera for an extended period of time or when connecting to a computer or printer. Cannot be used to charge the camera batteries. DC Coupler DR-DC10 is required to connect the AC adapter kit to the camera.
Separately Sold Accessories Flash High-Power Flash HF-DC1 z This externally mounted flash can be used to capture photographic subjects that are too distant for the built-in flash to illuminate. Other Accessories AV Cable AVC-DC300 z Use this cable to connect to a TV for shooting and viewing images. Printers SELPHY series Y P O C Canon-Brand PictBridge Compliant Printers z By connecting your camera to a Canonbrand PictBridge compliant printer, you can print your images without having to use a computer.
2 Learning More This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions.
Components Guide Y P O C Lamp (pp. 52, 53, 54, 62, 113, 114) Microphone (p. 26) Lens Shutter Button (p. 19) Power Button (p. 15) (Mode) Button Use the Flash (pp. 48, 67) Speaker Tripod Socket Memory Card / Battery Cover (p. 12) DC Coupler Cable Port (p. 119) button to change the Shooting mode. Auto Mode You can leave it to the camera to select settings for fully automatic shooting (p. 20). Movie Mode For shooting movies (pp. 25, 81).
Components Guide Screen (LCD Monitor) (pp. 38, 126, 128) Zoom Button Shooting: i (Telephoto) / j (Wide Angle) (pp. 20, 25, 49) Playback: k (Magnify) (p. 90) / g (Index) (p. 86) Indicator (p. 39) Strap Mount ( p. 11) 1 (Playback) Button (pp. 23, 85) DIGITAL Terminal (pp. 30, 98) A/V OUT (Audio/Video Output) Terminal (p. 91) (Mode) Button (p. 36) n Button (p. 41) b (Exposure Compensation) (p. 67) / d (Jump) (p. 87) / o Button e (Macro) (p. 72) / q Button m FUNC./SET Button (p. 40) h (Flash) (pp.
Screen Display Switching the Display Shooting You can change the screen display by pressing the n button, then choosing [Shooting Info] from the 4 tab. Refer to pp. 126 for details on information that appears on the screen. [On] Information Display Playback [Off] No Information Display Y P O C You can change the screen display by pressing the n button, then choosing [Info Display] from the 1 tab. Refer to pp. 128 for details on information that appears on the screen.
Indicator Screen Display in Dark Shooting Conditions The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, the brightness of the image on the screen, and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject may appear somewhat jagged on the screen. This has no effect on the recorded image.
FUNC. Menu – Basic Operations You can set commonly used shooting functions using the FUNC. menu. The menu items and options differ depending on the Shooting mode (pp. 130 – 133). Display the FUNC. menu. z Press the m button. Choose a menu item. z Press the op buttons to choose a menu item. X The available options for the menu item Y P O C appear in the lower part of the screen. Choose an option. Available Options Menu Items z Press the qr buttons to choose an option.
MENU – Basic Operations Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting (4) and playback (1). The options differ depending on the Shooting mode and the Playback mode (pp. 134 – 136). Display the menu. z Press the n button. Choose a tab. z Press the zoom buttons or the qr buttons to choose a tab. Y P O C Choose an item. z Press the op buttons to choose an item.
Changing the Sound Settings You can silence or adjust the volume of camera sounds. Muting Sounds Display the menu. z Press the n button. Choose [Mute]. z Press the zoom buttons to choose the 3 tab. z Press the op buttons to choose [Mute], Y P O C then press the qr buttons to choose [On]. z Press the n button to restore the normal screen. • You can also mute camera sounds by holding down the n button and turning on the power.
Changing the Sound Settings Adjusting the Volume Display the menu. z Press the n button. Choose [Volume]. z Press the zoom buttons to choose the 3 tab. z Press the op buttons to choose [Volume], then press the m button. Y P O C Change the volume. z Press the op buttons to choose an item, then press the qr buttons to adjust the volume. z Press the n button twice to restore the normal screen.
Returning the Camera to Default Settings When you have mistakenly changed a setting, you can reset the camera to the default settings. Display the menu. z Press the n button. Choose [Reset All]. z Press the zoom buttons to choose the 3 tab. z Press the op buttons to choose [Reset All], then press the m button. Y P O C Reset the settings. z Press the qr buttons to choose [OK], then press the m button. X The camera will reset to the default settings.
Power Saving Function (Auto Power Down) To save battery power, the screen turns off, and the camera shuts down automatically when it is not operated for a certain time. Power Saving during Shooting The screen will turn off approximately 1 minute after you stop operating the camera. After about 2 more minutes, the lens will retract and the power will turn off. When the screen has turned off but the lens has not yet retracted, pressing the shutter button halfway (p.
Y P O C 46
3 Shooting with Commonly Used Functions Y P O C This chapter explains how to use common functions, such as the selftimer, and how to turn off the flash. • This chapter assumes that the camera is set to » mode. When shooting in another mode, check which functions are available in that mode (pp. 130 – 133).
Turning the Flash Off You can shoot with the flash turned off. Press the r button. Choose !. z Press the qr buttons to choose !, then press the m button. X Once set, ! will appear on the screen. z To turn the flash back on, follow the steps Y P O C above to choose What if a flashing . appears? When you press the shutter button halfway in low light conditions where camera shake is likely, a flashing will appear on the screen. Attach the camera to a tripod to prevent it from moving.
Zooming in More Closely on Subjects (Digital Zoom) You can use the digital zoom to zoom up to approximately 13x maximum, and capture subjects that are too far away for the optical zoom to enlarge. However, depending on the recording pixel setting (p. 55) and zoom factor, the images may appear coarse (the zoom factor will appear in blue). Press the i zoom button. z Hold the button until zooming stops. X Zooming stops at the largest possible zoom factor without image deterioration.
Zooming in More Closely on Subjects (Digital Zoom) Digital Tele-Converter The focal length of the lens can be increased by approximately 1.4x or approximately 2.3x. This enables a faster shutter speed and less chance of camera shake than the zoom (including digital zoom) used by itself at the same zoom factor. However, a recording pixel setting (p. 55) of or will cause images to appear coarse (the zoom factor will appear in blue). Display the menu. z Press the n button. Y P O C Choose [Digital Zoom].
Inserting the Date and Time You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set (p. 15). Display the menu. z Press the n button. Choose [Date Stamp]. z Press the zoom buttons to choose the 4 tab. z Press the op buttons to choose [Date Y P O C Stamp]. Choose the setting. z Press the qr buttons to choose [Date] or [Date & Time].
Using the Self-Timer You can insert and print the shooting date in images which do not have an embedded date and time as follows. However, if you do this for images with an embedded date and time, the date and time may be printed twice. • Use the DPOF print settings (p. 105) to print. • Use the included software to print. Refer to the Software Guide for details. • Print using printer functions (p. 107). Using the Self-Timer The self-timer can be used to shoot a group photo that includes the photographer.
Using the Self-Timer Shoot. z Press the shutter button halfway to focus on the subject, then press it fully. X When the self-timer starts, the lamp blinks and the self-timer sound plays. X Two seconds before the shutter releases, the lamp and sound speed up (the lamp remains lit when the flash will fire). z To cancel shooting with the self-timer after the countdown has started, press the p button. z To restore the original setting, choose in Step 2 on p. 52.
Using the Self-Timer Customizing the Self-Timer You can set the delay (0 – 30 seconds) and the number of shots (1 – 10 shots). Choose $. z Follow Step 2 on p. 52 to choose $, then press the n button immediately. Choose the settings. Y P O C z Press the op buttons to choose [Delay] or [Shots]. z Press the qr buttons to choose a value, then press the m button. X Once set, $ will appear on the screen. z Follow Step 3 on p. 53 to shoot.
Changing the Recording Pixel Setting (Image Size) You can choose from 5 recording pixel settings. Choose the recording pixel setting. z After pressing the m button, press the op buttons to choose . Choose an option. z Press the qr buttons to choose an option, then press the m button. X The setting will appear on the screen. z To restore the original setting, choose Y P O C in Steps 1 – 2. If you choose , you cannot use the digital zoom (p. 49) or digital teleconverter (p. 50).
Changing the Compression Ratio (Image Quality) Approximate Values for Recording Pixels and Compression Ratio Recording Pixels Compression Ratio Single Image Data Size (Approx. KB) Number of Shots per Memory Card (Approx. shots) 4 GB 16 GB (Large) 10M/3648x2736 2565 1471 6026 1226 3017 12354 (Medium 1) 6M/2816x2112 1620 2320 9503 780 4641 19007 (Medium 2) 2M/1600x1200 558 6352 26010 278 12069 49420 (Small) 0.
4 Adding Effects and Shooting in Various Conditions Y P O C This chapter explains how to add effects and how to shoot in various conditions.
Shooting in Various Conditions The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Choose a Shooting mode. z After pressing the button, press the qr buttons to choose K. z Press the op buttons to choose a Shooting mode, then press the m button. Y P O C Shoot. Take shots with reduced blur (Blur Reduction) z Lets you shoot with reduced camera shake and subject blur.
Shooting in Various Conditions Take shots in low light conditions (Low Light) z Lets you take shots in dark places with reduced camera shake and subject blur. w Take shots of people at the beach (Beach) z Lets you take shots of brightly lit people on sandy beaches where the reflected sunlight is strong. Y P O C O Take shots of foliage (Foliage) z Lets you shoot trees and leaves, such as new growth, autumn leaves or blossoms, in vivid colors.
Shooting in Various Conditions t Take shots of fireworks (Fireworks) z Lets you take shots of fireworks in vivid colors. In t mode, attach the camera to a tripod to prevent the camera from moving and blurring the image. • In and modes, the recording pixel setting will be fixed at (1600 x 1200 pixels). • In V mode, images may appear coarse because the ISO speed (p. 69) is increased to match the shooting conditions.
Adding Effects and Shooting You can add various effects to images when shooting. Choose a Shooting mode. z Follow Step 1 on p. 58 to choose a Shooting mode. Shoot. Shoot images with vivid colors (Super Vivid) z Lets you take shots with vivid, intense colors. Y P O C Take posterized shots (Poster Effect) z Lets you take shots that look like an old poster or illustration. Since you may not achieve the expected results with images shot in and modes, try taking some test shots first.
Using the Face Self-Timer The shutter will release approximately two seconds after the camera detects a new face (p. 73). You can use this when the photographer wants to be in the image, such as a group photo. Choose . z Follow Step 1 on p. 58 to choose . Compose the shot and press the shutter button halfway. z Make sure a green frame appears on the face focused on and white frames appear on other faces. Y P O C Press the shutter button fully.
Shooting Long Exposures You can set the shutter speed to a range between 1 and 15 seconds to shoot long exposures. However, you should attach the camera to a tripod to prevent the camera from moving and blurring the image. Choose ≈. z Follow Step 1 on p. 58 to choose ≈. Choose the shutter speed. z Press the o button. z Press the qr buttons to choose the Y P O C shutter speed, then press the m button. Confirm the exposure.
Y P O C 64
5 Choosing Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills. Y P O C • This chapter assumes that you have chosen G mode by pressing the button, then the qr buttons. • G stands for Program AE. • Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 130 – 135).
Shooting in Program AE You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. The focusing range is approximately 5 cm (2.0 in.) – infinity at maximum wide angle (j), and approximately 25 cm (9.8 in.) – infinity at maximum telephoto (i). Enter G mode. z After pressing the button, press the qr buttons to choose G, then press the m button. Adjust the settings according to your purposes (pp. 67 – 79). Y P O C Shoot.
Adjusting the Brightness (Exposure Compensation) You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of -2 to +2. Enter Exposure Compensation mode. z Press the o button. Adjust the brightness. z While watching the screen, press the qr buttons to adjust the brightness, then press the m button. X The exposure compensation amount will appear on the screen. Y P O C Turning the Flash On You can make the flash fire every time you shoot.
Adjusting the White Balance The white balance (WB) function sets the optimal white balance for natural looking colors to match the shooting conditions. Choose the white balance function. z After pressing the m button, press the op buttons to choose . Choose an option. z Press the qr buttons to choose an option, then press the m button. X The setting will appear on the screen. Auto Automatically sets the optimal white balance for the shooting conditions.
Changing the ISO Speed Choose the ISO speed. z After pressing the m button, press the op buttons to choose . Choose an option. z Press the qr buttons to choose an option, then press the m button. X The setting will appear on the screen. Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. Low For shooting outdoors, in fine weather conditions. For shooting in cloudy, or twilight conditions. Y P O C High For shooting nightscapes, or in dark interiors.
Continuous Shooting You can shoot continuously at a maximum speed of approximately 0.8 images/second while the shutter button is pressed fully and held. Choose a Drive mode. z After pressing the m button, press the op buttons to choose . Choose an option. z Press the qr buttons to choose W, then press the m button. z Once set, W will appear on the screen. Shoot. Y P O C X As long as you hold the shutter button down, the camera will shoot successive images. • Cannot be used with the self-timer (pp.
Changing the Tone of an Image (My Colors) You can change the tone of an image, for example to sepia or black and white, when shooting. Choose My Colors. z After pressing the m button, press the op buttons to choose . Choose an option. z Press the qr buttons to choose an option, then press the m button. X The setting will appear on the screen. My Colors Off Vivid Neutral Sepia B/W Custom Color — Y P O C Emphasizes the contrast and color saturation for a vivid impression.
Shooting Close-ups (Macro) You can shoot an object at a close distance or even shoot extreme close-ups of it. The focusing range is approximately 1 – 50 cm (0.4 in. – 1.6 ft.) from the end of the lens at maximum wide angle (j). Choose e. z After pressing the q button, press the qr buttons to choose e, then press the m button. X Once set, e will appear on the screen. The edges of the image may darken if the flash fires.
Changing the AF Frame Mode You can change the AF (Auto Focus) frame mode to match the scene you want to shoot. Choose [AF Frame]. z Press the n button to choose [AF Frame] from the 4 tab, then press the qr buttons to choose an option. Face AiAF • Detects people’s faces and sets the focus, exposure (evaluative metering only) and white balance ( only). • When the camera is pointed at subjects, a white frame appears on the face the camera judges to be the main subject, and gray frames (max.
Changing the AF Frame Mode Center The AF frame is locked to the center. This is effective for focusing on a specific point. You can reduce the AF frame size • Press the n button to choose [AF Frame Size] from the 4 tab, then choose [Small]. • The AF frame is set to [Normal] when using the digital zoom (p. 49) or digital tele-converter (p. 50). If the camera cannot focus when you press the shutter button halfway, the AF frame will turn yellow and will appear.
Magnifying the Focal Point If you press the shutter button halfway, the AF frame will magnify and you can check the focus. Choose [AF-Point Zoom]. z Press the n button to choose [AF- Point Zoom] from the 4 tab, then press the qr buttons to choose [On]. Check the focus. z Press the shutter button halfway. X In [Face AiAF] (p. 73), the face detected as Y P O C the main subject will appear magnified. X In [Center] (p. 74), the contents of the center AF frame will appear magnified.
Shooting with the AF Lock The focus can be locked. After locking the focus, the focal distance will not change even when you release your finger from the shutter button. Lock the focus. z Keep the shutter button pressed halfway and press the q button. X The focus locks and % appears on the screen. z If you release your finger from the shutter button and press the q button again, % will disappear and the focus will unlock. Compose the scene and shoot.
Shooting with the AE Lock You can lock the exposure and shoot, or set the focus and exposure separately to shoot. AE stands for “Auto Exposure”. Choose ! (p. 48). Lock the exposure. z Point the camera toward the subject and press the o button while pressing the shutter button halfway. X When & appears, the exposure will be locked. z If you release your finger from the shutter button and press the o button again, & will disappear and AE will unlock. Y P O C Compose the scene and shoot.
Shooting with Slow Synchro You can make the main subject, such as people, appear bright by having the camera provide the appropriate illumination with the flash. At the same time, you can use a slow shutter speed to brighten the background that the light from the flash cannot reach. Choose …. z After pressing the r button, press the qr buttons to choose …, then press the m button. X Once set, … will appear on the screen. Shoot.
Red-Eye Correction You can automatically correct red-eye that occurs in images taken with the flash. Choose [Flash Settings]. z Press the n button to choose [Flash Settings] from the 4 tab, then press the m button. Choose the setting. z Press the op buttons to choose [Red- Eye Corr.], then press the qr buttons to choose [On]. X Once set, Πwill appear on the screen. Y P O C Red-eye correction may be applied to areas other than red eyes. For example, when red make-up has been used around eyes.
Y P O C 80
6 Using Various Functions for Shooting Movies Y P O C This chapter serves as a more advanced version of the “Shooting Movies” and “Viewing Movies” sections in Chapter 1, and explains how to use various functions for shooting and viewing movies. • This chapter assumes that E has been chosen by pressing the then the qr buttons.
Changing the Image Quality You can choose among 3 different image quality settings. Choose the image quality setting. z After pressing the m button, press the op buttons to choose . Choose an option. z Press the qr buttons to choose an option, then press the m button. X The option you set will appear on the screen. Image Quality and Shooting Time per Memory Card Image Quality Y P O C Recording Pixels, Frame Rate 640 x 480 pixels, 30 frames/sec.
AE Lock/Exposure Shift You can lock the exposure or change it in 1/3 steps within a range of ±2 before shooting. Focus. z Press the shutter button halfway to focus. Lock the exposure. z After releasing the shutter button, press the o button to lock the exposure. The exposure shift bar appears. z Press the o button again to release the lock. Y P O C Change the exposure. z While watching the screen, press the qr buttons to adjust the exposure. Shoot.
Other Shooting Functions The following functions can be used in the same way as for still images. • Zooming in More Closely On Subjects The optical zoom is not available while shooting. Be sure to set the optical zoom before shooting. • Using the Self-Timer (p. 52) • Using the Self-Timer to Prevent Camera Shake (p. 53) • Customizing the Self-Timer (p. 54) The number of shots cannot be set. • Adjusting the White Balance (p. 68) • Changing the Tone of an Image (My Colors) (p.
7 Using Various Playback and Editing Functions Y P O C This chapter explains various ways to play back and edit images. • Press the 1 button to enter Playback mode before operating the camera. • It may not be possible to play back or edit images that have been edited on a computer, have had their file names changed, or have been taken on a different camera. • The edit function (pp. 95 – 96) cannot be used if the memory card does not have enough free space available.
Quickly Searching Images Searching Images Using Index Display Displaying multiple images at the same time lets you quickly find the image you want. Press the g zoom button. X Images will display in an index. z The number of images increase each time you press the g zoom button. z The number of images decrease each time you press the k zoom button. Choose an image. Y P O C z Press the opqr buttons to choose an image. X An orange frame appears on the chosen image.
Searching for Images Using the Jump Display When there are many images on the memory card, you can search them by a specified method or image unit. Choose a jump method. z In single image playback, press the o button. X The jump method and the position of the currently displayed image will appear at the bottom of the screen. z Press the op buttons to choose the desired jump method. Switch images. Y P O C z Press the qr buttons.
Viewing Slideshows You can automatically play back images recorded to a memory card. Choose [Slideshow]. z Press the n button to choose [Slideshow] from the 1 tab, then press the m button. Choose a setting. z Press the op buttons to choose a menu item, then press the qr buttons to choose an option. Y P O C Repeat Repeats playback of images Play Time Display time for each image Effect Transition effects when switching between images Choose [Start].
Checking the Focus You can magnify the area of a recorded image that was inside the AF Frame to check the focus. Choose [Focus Check]. z Press the n button to choose [Info Display] from the 1 tab. z Press the qr buttons to choose [Focus Check], then press the n button. X A white frame will appear where the AF frame was when the focus was set. X A gray frame will appear on a face Y P O C detected during playback. X The area within the orange frame appears magnified. Switch frames.
Magnifying Images Press the k zoom button. z The display will zoom in on the image and will appear. If you continue to hold the zoom buttons, it will zoom in up to a maximum factor of approximately 10x. z If you press the opqr buttons, you can move the location of the displayed area. z Press the g zoom button to zoom out, or continue to hold it to return to single image playback. z When appears on the screen, press the m button to switch to . Press the qr buttons to switch between images while zoomed.
Viewing Images on a TV Using the separately sold AV cable, you can connect the camera to a TV to view images you have shot. Turn off the camera and TV. Connect the camera to the TV. z Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. White or black z Insert the cable plug fully into the video input terminals as shown in the illustration. Yellow Yellow Y P O C Black Turn on the TV and switch it to the input the cable is connected to. Turn on the camera.
Protecting Images You can protect important images so that they cannot be accidentally erased with the camera (pp. 24, 93). Choose [Protect]. z Press the n button to choose [Protect] from the 1 tab, then press the m button. Choose an image. z Press the qr buttons to choose an image, then press the m button. will appear on the screen. z Press the m button again to deselect the image. will disappear. z To choose additional images, repeat the above procedure. Y P O C X Protect the image.
Erasing All Images You can erase all images at once. Since erased images cannot be recovered, exercise adequate caution before erasing. Protected images (p. 92) cannot be erased. Choose [Erase all]. z Press the n button to choose [Erase all] from the 1 tab, then press the m button. Erase all images. z Press the qr buttons to choose [OK], then Y P O C press the m button.
Rotating Images You can change the orientation of an image and save it. Choose [Rotate]. z Press the n button to choose [Rotate] from the 1 tab, then press the m button. Rotate the image. z Press the qr buttons to choose an image. z The image will rotate 90° with each press of the m button. Y P O C z Press the n button to restore the menu screen.
Resizing Images You can resize images to a lower pixel setting and save the resized image as a separate file. Choose [Resize]. z Press the n button to choose [Resize] from the 1 tab, then press the m button. Choose an image. z Press the qr buttons to choose an image, then press the m button. Choose an image size. Y P O C z Press the qr buttons to choose an option, then press the m button. X [Save new image?] will appear on the screen. Save the new image.
Correcting the Red-Eye Effect You can automatically correct red eyes in images and save them as new files. Choose [Red-Eye Correction]. z Press the n button to choose [RedEye Correction] from the 1 tab, then press the m button. Choose an image. z Press the qr buttons to choose an image. Correct the image. z Press the m button. X Red-eye detected by the camera will be Y P O C corrected and a frame will appear around the corrected portion.
8 Printing This chapter explains how to choose images for printing, and print using a Canon-brand PictBridge compliant printer (sold separately). Y P O C Canon-Brand PictBridge Compliant Printers This chapter uses Canon-brand SELPHY CP series printers in the explanations. The displayed screens and available functions will differ depending on the printer. Please also refer to the Printer User Guide.
Printing Images Easy Print You can easily print the pictures you take by connecting the camera to a PictBridge compliant printer (sold separately) using the supplied interface cable (p. 2). Turn off the camera and printer. Connect the camera to the printer. z Open the cover and insert the cable’s small plug firmly into the camera terminal in the direction shown. z Insert the cable’s large plug into the printer. For connection details, refer to the user guide provided with the printer.
Printing Images Print images. z Press the op buttons to choose [Print], then press the m button. X Printing will start. z If you want to print additional images, repeat Steps 5 and 6 after printing has completed. z After printing has completed, turn off the camera and printer, and unplug the interface cable. Y P O C • Refer to p. 34 for Canon-brand Pictbridge compliant printers (sold separately). • Index printing is not available on certain Canon-brand PictBridge compliant printers (sold separately).
Printing Images Making Print Settings Connect the camera to the printer. z Follow Steps 1 – 5 on p. 98 to display the screen on the left. Choose a menu item. z Press the op buttons to choose an item. Choose an option. z Press the qr buttons to choose an option. Default Follows the printer's settings. Y P O C Date Prints the date. File No. Prints both the date and file no. Both Prints the file number. Off — Default Follows the printer's settings.
Printing Images Trimming and Printing (Trimming) You can cut out a portion of an image for printing. Choose [Trimming]. z Follow Steps 1 – 2 on p. 100 to choose [Trimming], then press the m button. X A frame will appear around the portion of the image to be trimmed. Choose the trimming area. z Press the zoom buttons to change the Y P O C frame size. z Press the opqr buttons to change the frame position. z Press the m button to rotate the frame.
Printing Images Choosing the Paper Size and Layout for Printing Choose [Paper Settings]. z Follow Steps 1 – 2 on p. 100 to choose [Paper Settings], then press the m button. Choose a paper size. z Press the op buttons to choose an option, then press the m button. Y P O C Choose a paper type. z Press the op buttons to choose an option, then press the m button. Choose a layout. z Press the op buttons to choose a layout, then press the m button.
Printing Images Available Layout Options Default Follows the printer's settings. Bordered Prints with a border. Borderless Prints without a border. N-up Choose how many copies of an images are printed on a sheet. ID Photo Prints ID photos. Only images with the same resolution as the camera's (Large) recording pixel setting can be chosen. Fixed Size Choose the print size. Choose from 3.5 x 5 in., postcard and wide sized prints. Printing ID Photos Y P O C Choose [ID Photo].
Printing Images Printing Movies Connect the camera to the printer. z Follow Steps 1 – 5 on p. 98 to choose a movie. z Press the qr buttons to choose 2, then press the m button to display the screen on the left. Choose a printing method. z Press the op buttons to choose , then press the qr buttons to choose a printing method. Y P O C Print. Printing methods for movies Single Prints currently displayed scene as a still image.
Choosing Images for Printing (DPOF) You can choose up to 998 images on a memory card for printing and specify settings such as the number of copies so that they can be printed together (p. 107) or processed at a photo developer service. These selection methods comply with the DPOF (Digital Print Order Format) standards. Print Settings You can set the print type, date and file number. These settings apply to all images chosen for printing. Choose [Print Settings].
Choosing Images for Printing (DPOF) • With [Index] chosen, the [Date] and [File No.] options cannot be set to [On] at the same time. • The date will be printed in the style set in the [Date/Time] function in the 3 tab, which can be chosen after you press the n button (p. 15). • Movies cannot be chosen. Choosing the Number of Copies Choose [Select Images & Qty.]. z Press the n button to choose [Select Images & Qty.] from the 2 tab, then press the m button. Y P O C Choose an image.
Choosing Images for Printing (DPOF) Set All Images to Print Once Choose [Select All Images]. z Follow Step 1 on p. 106 to choose [Select All Images], then press the m button. Make print settings. z Press the qr buttons to choose [OK], then press the m button. Clearing All Selections Choose [Clear All Selections]. Y P O C z Follow Step 1 on p. 106 to choose [Clear All Selections], then press the m button. All selections will be cleared. z Press the qr buttons to choose [OK], then press the m button.
Y P O C 108
9 Customizing Camera Settings You can customize various settings to suit your shooting preferences. The first part of this chapter explains convenient and commonly used Y P O C functions. The latter part explains how to change shooting and playback settings to suit your purposes.
Changing Camera Settings You can customize convenient and commonly used functions from the 3 tab (p. 41). Low Level Memory Card Formatting Perform low level formatting when [Memory card error] appears, the camera does not operate properly, you think that the recording/reading speed of a memory card has dropped, or recording suddenly stops while shooting a movie. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Choose [Low Level Format].
Changing Camera Settings Turning Off the Start-up Image You can turn off the start-up image that displays when you turn on the camera. z Choose [Start-up Image], then press the qr buttons to choose [Off]. Changing the File Number Assignment Y P O C Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 – 9999, and saved to folders of up to 2,000 images. You can change the file number assignment.
Changing Camera Settings Creating Folders by Shooting Date Images are saved into folders created each month, however, you can also create folders by shooting date. z Choose [Create Folder], then press the qr buttons to choose [Daily]. z Images will be saved into folders created on each shooting date. Changing the Lens Retract Time Y P O C For safety reasons, the lens retracts about 1 minute after pressing the 1 button when in a Shooting mode (p. 23).
Changing Shooting Function Settings Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically (p. 45). This also works when [Auto Power Down] is set to [Off]. z Choose [Power Saving], then press the m button. z Press the op buttons to choose [Display Off], then use the qr buttons to choose a time. z In order to save battery power, you should choose less than [1 min.].
Changing Shooting Function Settings Turning Off the Red-Eye Reduction Function The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function. z Choose [Flash Settings], then press the m button. z Press the op buttons to choose [Red- Eye Lamp], then press the qr buttons to choose [Off].
Changing Shooting Function Settings Changing the Way the Image Displays Right After Shooting You can change the way the image displays right after shooting. z Choose [Review Info], then press the qr buttons to choose an option. Off Displays the image only. Detailed Displays detailed information (p. 128). The area inside the AF frame is magnified, allowing you to check Focus Check the focus. The procedure is the same as in “Checking the Focus” (p. 89).
Changing Playback Function Settings You can adjust the settings in the 1 tab by pressing the 1 button (p. 41). Choosing the Image that First Displays in Playback z Choose [Resume], then press the qr buttons to choose an option. Last seen Resumes with the image last viewed. Last shot Resumes with the most recently shot image.
10 Useful Information This chapter introduces how to change the date/time battery, the use of the AC adapter kit, troubleshooting tips, and contains lists of Y P O C functions and items that appear on the screen.
Replacing the Date/Time Battery The life of the date/time battery (back-up battery) is approximately 7 years. If the Date/Time settings screen appears every time the camera is turned on, replace the date/time battery with a new one (CR1220). Turn off the camera. Open the cover and remove the AA batteries (p. 12). Remove the date/time battery holder. Y P O C (-) Replace the battery. z Insert the battery with (+) and (-) sides oriented correctly. (+) Insert the battery holder.
Using Household Power If you use AC Adapter Kit ACK800 and DC Coupler DR-DC10 (both sold separately), you can use the camera without worrying about how much charge is left in the batteries. Turn off the camera. Open the cover. z Follow Step 2 on p. 12 to open the memory card/battery cover. z Open the coupler cable port as shown. Coupler Cable Port Y P O C Insert the coupler. z Insert the coupler as shown. z Make sure the coupler cable passes through the port. Cable Close the cover.
Using Household Power Connect the power cord. z Insert the coupler cable terminal into the adapter plug. z Connect the power cord to the compact power adapter, then plug the other end into a power outlet. z Turn the camera on to use it. z After you finish, turn off the camera and unplug the power cord from the power outlet. Y P O C Do not unplug the plug or power cord with the camera turned on. This could erase images you have taken or damage the camera.
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the power button, but nothing happened. • • • • Confirm that the batteries are the correct type, and are not depleted (p. 14). Confirm that the batteries are properly inserted (p. 12). Confirm that the memory card/battery cover is securely closed (p. 13).
Troubleshooting • Confirm that functions which you do not intend to use (macro, etc.) are not set. • Shoot using the focus lock or AF lock (pp. 74, 76). Even when you press the shutter button halfway, the AF frame does not appear, and the camera does not focus. • If you center on the light and dark contrasting area of the subject and push the shutter button halfway, or repeatedly push the shutter button halfway, the AF frame will appear and the camera will focus. Subject is too dark.
Troubleshooting Shooting movies Correct shooting time does not display, or stops. • Format the memory card in the camera, or use a memory card capable of recording at high speeds. Even when the shooting time does not display properly, the recorded video will be the length that it was actually shot (pp. 18, 26). appeared on the screen and shooting ended automatically. The camera’s internal memory was insufficient. Try one of the following: • Perform a low-level format of the memory card in the camera (p.
List of Messages That Appear on the Screen If error messages appear on the screen, try one of the following solutions. No memory card • The memory card is not installed in the correct direction. Install the memory card in the correct direction (p. 13). Memory card locked • The SD memory card, SDHC memory card or SDXC memory card’s write protect tab is set to “LOCK”. Unlock the write protect tab (pp. 12, 13). Cannot record! • You attempted to shoot an image without a memory card.
List of Messages That Appear on the Screen Communication error • Images could not be transferred to the computer or printed due to the large amount of images (approx. 1000) stored on the memory card. Use a commercially available USB card reader to transfer the images. Insert the memory card into the printer’s card slot to print.
Information Displayed on the Screen Shooting (Information Display) Y P O C Battery Charge Indicator (p. 14) White Balance (p. 68) My Colors (p. 71) Drive Mode (p. 70) Camera Shake Warning (p. 21) Metering Method (p. 76) Compression (Image Quality) (p. 55) / Recording Pixels (pp. 55, 82) Still Images: Recordable Shots (p. 56) Movies: Remaining Time (p. 82) 126 Self-Timer (pp. 52, 53, 54) AF Frame (p. 73) Spot AE Point Frame (p. 76) Digital Zoom Magnification (p. 49) / Digital Tele-converter (p.
Information Displayed on the Screen Scene Icons In » mode, the camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color.
Information Displayed on the Screen Playback (Detailed Information Display) Y P O C Shooting Mode (p. 130) ISO Speed (p. 69) Exposure Compensation Amount (p. 67), Exposure Shift Amount (p. 83) White Balance (p. 68) Histogram (p. 39) Image Editing (pp. 95 – 96) Compression (Image Quality) (p. 55) / Recording Pixels (pp. 55, 82), AVI (Movies) 128 Battery Charge Indicator (p. 14) Metering Method (p. 76) Folder Number – File Number (p.
Information Displayed on the Screen Summary of Movie Control Panel in “Viewing Movies” (p. 27) Exit Playback Slow motion playback (You can use the qr buttons to adjust the speed. Sound will not play back.) Skip backward* (Continues to skip backward if button is held.) Previous frame (Rewind if you hold down the m button.) Next frame (Fast forward if you hold down the m button.) Skip forward* (Continues to skip forward if button is held.) Appears when connected to a PictBridge compliant printer (p. 104).
Functions Available in Each Shooting Mode Shooting modes G — { { { { { { { { { { { Ò { { { { { — Î { { { { { — $ { { { { { — Delay *1 { { { { { — Shots *2 { { { { { — { { { { { { h — { { { { { … *3 { — — — — Exposure Compensation (p. 67) Self-Timer (pp. 52, 53, 54) Custom Timer (p. 54) Flash (pp. 48, 67, 78) K » Function I Y P O C ! V { { { { { { AE Lock (p. 77)/FE Lock (p.
Functions Available in Each Shooting Mode K w O P U t ≈ E { { — { { { { { — — { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { — { { { — — — { { { — { — — — *4 — *4 — { { { { — { { { — — — — { { { { — — — — — — — — — — — — { { { { { { { { { { { { Y P O C { { { { { — — — — — — — — — — — — {
Functions Available in Each Shooting Mode FUNC. Menu Shooting modes » G ISO Speed (p. 69) { — — — — — White Balance (p. 68) { — — — — — — { { { — { { { { { { { { { { { { { { { { { { { { { { { { { { { — { { { { — — — { { { { — — — Function My Colors (p. 71) Drive Mode (p.
Functions Available in Each Shooting Mode FUNC.
Menus 4 Shooting Menu Shooting modes » G { Center { — Function AF Frame (p. 73) AF Frame Size (p. 74) *2 Digital Zoom (pp. 49, 50) AF-Point Zoom (p. 75) AF-assist Beam (p. 113) Face AiAF *1 Review (p. 114) Review Info (p. 115) Disp. Overlay (p. 115) Date Stamp (p. 51) { { { { { { { — Normal — { { { { — — { { { — Standard { { { — { { { Off { { { { { 1.4x { { { — { { { 2.
Menus K w O P U t ≈ E { { { { { { { — { { { { { { { { { { { — { { { { { { { — { { { { { { { — { { — { — { { { { { { { { { { — { { { { { { { { { { { { { { { { { — — { { { { { { { — { { { { { — { — { { { { { { { { { { { — { { { { — { { { { — { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { { Y P O C { { { { { { { { { { { { { {
Menus 3 Set up Menu Item Content Ref. Page Mute On/Off* Volume Set all operation sounds (5 levels). p. 42 p. 43 Start-up Image On*/Off p. 111 Format Formats memory card, erasing all data File Numbering Continuous*/Auto Reset p. 111 Create Folder Monthly*/Daily p. 112 Lens Retract 1 min.*/0 sec. Power Saving Auto Power Down: On*/Off Display Off: 10, 20 or 30 sec./1*, 2 or 3 min. Date/Time Date and time settings p. 16 NTSC/PAL p.
Menus 2 Print Menu Item Print Content Ref. Page Displays printing screen (When connected to a printer). — Select Images & Qty. Chooses individual images for printing. p. 106 Select All Images Chooses all images for printing. p. 107 Clear All Selections Cancels all settings for printing. p. 107 Print Settings Sets the printing style. p.
Handling Precautions • This camera is a high-precision electronic device. Do not drop it or subject it to strong impacts. • Never place the camera close to magnets, motors or other devices that generate strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. • If water droplets or dirt become stuck on the camera or screen, wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
Specifications Image Sensor Camera Effective Pixels ..................Approx. 10 million pixels Lens Focal Length ...................................3.3x zoom: 6.6 (W) – 21.6 (T) mm (35mm film equivalent: 37 (W) – 122 (T) mm) Focusing Range ..............................1 cm (0.4 in.) – infinity (W), 25 cm (9.8 in.) – infinity (T) • Macro: 1 – 50 cm (0.4 in. – 1.6 ft.) (W), 25 – 50 cm (9.8 in. – 1.6 ft) (T) Imaging Processor...............................DIGIC III LCD Monitor Type ..........................
Specifications Continuous Shooting Mode ............................................... Normal Speed (Normal)............................... Approx. 0.8 shots/sec. (In G mode) Approx. 2.2 shots/sec. (In Blur Reduction and Low Light mode) Number of Shots (Approximate) (CIPA compliant) ................................. Alkaline: Approx. 300 NiMH: Approx. 500 Recording Media .................................
Index Numerics 3:2 Guide ................................................. 115 A AC Adapter Kit......................................... 119 Accessories ............................................... 33 AE Lock ............................................... 77, 83 AF Frames........................................... 21, 73 AF J Focus AF Lock ............................................. 76, 126 AF-Point Zoom .......................................... 75 AUTO Mode (Shooting Mode) ...................
Index G Grid Lines ........................................ 115, 126 H Household Power .................................... 119 I Image Quality J Compression Ratio Images Display Time..................................... 114 Editing J Editing Erasing Images............................. 24, 93 Playback J Viewing Protect ................................................ 92 Included Items J Accessories Indicator............................................... 37, 39 Infinity (Focus Mode)......................
Index Shooting Date and Time J Date/Time Shooting Info .................................... 126 Shooting Time..................................... 26 Shooting Using a TV.................................. 79 Slideshow .................................................. 88 Snow (Shooting Mode) .............................. 59 Software DIGITAL CAMERA Solution Disk ......... 2 Installation........................................... 29 Software Guide .....................................
MEMO Y P O C 144
MEMO Y P O C 145
MEMO Y P O C 146
MEMO Y P O C 147
Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products. Y P O C CDP-E113-010 © CANON INC.
